K-Tuned Spherical Shifter Cable Bushings Reviews

Amazing quality & price!

Very impressed how these bushing feel after install and looks great also! Would be great if they came in other colors but definitely not shedding any tears over it.. Took about 15 minutes to install and could tell the difference before the test drive. Even without the upgrade shifter or cables. Which will be coming soon! These are a Great inexpensive upgrade to add to your build. Even if its jus your daily driver. Definitely recommend.. Customer sevice was very helpful! Steve was a big help when I needed question anwsered! Really appreciate you and the K-series staff for all the help! Definitely will be doin business with you guys again! Thanks

Perfect fit and great quality. Still need a couple other parts to restore the shift quality but these are a must to replace worn rubber bushings.

Bought these as I figured the stock bushings have seen better days. There are no instructions included. Installing straight forward: Don't remove the o rings. Pry the old bushing out. Screwdriver, vice grips Lube the o rings and insert the bushings. I used bearing grease. I guess you could add the c-clips to lock the bushing. I didn't. But the o rings are absolutely needed don't remove them.

Worked like a charm, very satisfied.

Bushings helped. Installation was impossible as shipped. The rubber O rings made the fit for the larger bushing impossible. Removing them allowed the bushing to fit and had a little wiggle room, but is improved over previous rubber bushings. Will upgrade further in the future.

2007 civic si. Quick install and smooth shifting. Great product from ktuned and great customer service from kseries.

I think I meant to order the Hybrid Racing units due to the reviews. I don't know why I ordered these. I must've been in a hurry. I had them on for a few days and had added a heavy Skunk 2 shifter knob and solid shifter base bushings. The whole package was a nice upgrade, however the first time I went to rapidly shift from 1st to 2nd, the clip/cotter pin that comes with the unit COLLAPSED and the bushing nearly came out! I had to shave a mm or so off of the center shaft and install the large, thick flat washer that was on the original rubber bushing with a new cotter pin. This was within a week of installation. What's funny is that I was a little nervous about that VERY thing when I installed it. I thought, "there isnt much strength, here". So much for ignoring that 'little voice' inside my head. NOW they seem fine.