Images may be for reference only
Product Details
| Part Number: | 1924-K1 |
| Brand: | Acuity Instruments |
| Thread Pitch: | M10 x 1.5 |
| Transmission: | Manual |
The Acuity shift boot adapter that looks good with any shift knob.
Features:
- Shift boot no longer sags
- matches virtually all styles of shift knobs for clean fitment
- Easy assembly and removal
- Aluminum and stainless steel construction
- Made in the USA
Kit Contents:
- 1x Shift Boot Collar
- 1x Flat-Bottomed Knob Binding Nut (part # 1924-03)
- 1x Boss-Bottomed Knob Binding Nut (part # 1924-01)
- 4x Small Cable Ties
Note about shift boots and cable ties:
On some shift boots, the supplies zip ties may not reach around the whole boot.
Avoid using a larger cable tie as it will not fit into the groove on the boot collar as well.
Instead, use 2 of the supplied cable ties attached together to reach around the whole shift boot.
If you need more cable ties, similar cable ties can be purchased (normally in black though) from most hardware stores near you.
Note: Fits most m10x1.5 shifters
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
This part does not have vehicle specific fitment. Please contact us if you need assistance.
1 Reviews ★★★★★
0
0
0
0
1
Zack Chance | September 20th, 2019
Really nice finish to this little piece and it nearly lined up perfectly with the BLOX Original knob i purchased and i mean nearly as in maybe 1/16 inch or less between the OD of the tapered end of the collar and the OD of the bottom of the knob.
I digress this piece is super nice and really makes for a clean hassle free knob swap the included zip ties hellped out alot and are pretty stout so i doubt I'll ever have a issue.
