Skunk2 K-Series Silver Pro Series Intake Manifold Reviews

Install was simple and made good power. Compared to the Civic Si's RBC, it makes a couple more HP more when you look at dyno sheets online so this is a good alternative unless you want to spend more and get Skunk2's Ultra race manifold or an RRC. The only complaint I have is that it only has 4 holes to bolt up to the throttle body and is missing the 5th hole that gives the map sensor air for an 05/06 rsx. The map sensor is moved onto the throttle body instead of the manifold for 05/06 rsx's and so when you install this manifold you need to drill an additional hole into the manifold like where it is for the stock PRB manifold for the map sensor to get an air reading or you will have to reroute the map sensor to get air from the top of the manifold where there is a plug you can take off and run a tube to the map sensor.

Good quality product. There were two issues. 1. No pcv nipple on the manifold, I used an oil catch can and routed it to the short ram intake 2. The manifold gasket it comes with needs to be trimmed around where the injectors are. It blocks part of it