Progress Rear Sway Bar
Part Number: 62.0102
Inside Continental United States
Earn 407 reward points. Learn More
Will It Fit Your Vehicle?
Progress Suspension anti-roll bars dramatically improve handling. How? They minimize the traction-robbing body "lean" that rolls part of the outside tires off the pavement. Our Sport-tuned Anti-roll bars replace skinny OEM bars and rubber bushings with larger diameter (stiffer) alloy steel bars and polyurethane bushings.
More roll stiffness means less body "lean", and the tires stay flatter on the pavement (larger contact patches). The result is more grip and added driver control! Less body roll means more traction, faster cornering speeds, and increased driver confidence. Polyurethane bushings produce crisp response on turn-in.
Progress Anti-roll bars are cold-formed in-house using our custom-built precision bending equipment. Both laser-cut and CNC bar ends are MIG welded in place using a precise fixture for an exact fit.
This sway bar is non-adjustable and does not include endlinks.
- Part Number: 62.0102
- Location: Rear
- Manufacturer: Progress Technology
- Size: 22mm
- Acura RSX
- 2002 Acura RSX Type-S
- 2003 Acura RSX Type-S
- 2004 Acura RSX Type-S
- 2005 Acura RSX Type-S
- 2006 Acura RSX Type-S
- 2002 Acura RSX Manual
- 2003 Acura RSX Manual
- 2004 Acura RSX Manual
- 2005 Acura RSX Manual
- 2006 Acura RSX Manual
- 2002 Acura RSX Automatic
- 2003 Acura RSX Automatic
- 2004 Acura RSX Automatic
- 2005 Acura RSX Automatic
- 2006 Acura RSX Automatic
- Honda Civic
- 2001 Honda Civic Coupe
- 2002 Honda Civic Coupe
- 2003 Honda Civic Coupe
- 2001 Honda Civic Sedan
- 2002 Honda Civic Sedan
- 2003 Honda Civic Sedan
- 2002 Honda Civic Si Hatchback
- 2003 Honda Civic Si Hatchback
Customers Also Bought
Be the first to review this product
6/9/2015 by boon her
Easy to install. Love how it looks. Also cornering is pretty good with this. Have to get the front too to get full cornering potential.
12/4/2012 by Ryan Kaiser
Buy new endlinks with bar!
Definitely has a more solid and planted feel over the stock sway bar. I HIGHLY recommend buying a set of new endlinks with a sway bar. Chances of screwing them up upon removal of stock is very very high even with right tools. Paired with LCA's and tie bar, looks and feels great. Also don't forget to lube up bushing all around including where it touches the stops on the bar itself to prevent squeaking.
11/9/2012 by illest_DC5
Progress sway bar
Upgraded from stock sway bar and noticed a big difference in handling. The only negative was that the old end links broke so I ordered some Ingalls and Once I put suspension on it'll really bring it all together
10/31/2011 by Rich02RsxS
Much Improved Handling
Upgraded from the stock '02 Type-S 19mm sway bar and noticed a huge difference in how the car leans much less while taking corners.
10/3/2011 by John B
Great product works and fits great
Did just what its supposed to do. Made the car handle a lot better even with mediocre tires.
7/18/2010 by SSgt. Carlson
Great Suspension Mod
The installation was a little difficult, just because of the control arms and you might as well buy new end links as well, because you might strip the stock hex key end links.(they're garbage). All in all this is a great suspension mod, after you get a drop, make sure to pick up this sway bar. You immediately notice the increased stiffens in the rear end when cornering. Forget the front strut bar and GRAB A REAR SWAY BAR INSTEAD!
6/2/2010 by albert v.
looks great underneath. I can tell the rear stiffened up a lil more but if i could go back i woulda gone with the 24mm one instead. not much difference in performance but i get a lot of compliments on it
3/2/2010 by Lester "LesQuik" G
Progress Rear Sway Bar is a GREAT Addition
Installation was not much of a pain. Once I got on the open road, with side winding roads, I felt more comfortable than before. You realize the difference immediately. Driver comfort is increased greatly, can't wait to lower, and install the front sway bar. Worth every penny! Do not overlook this part!
11/19/2009 by Jamie
great part both for performance and asthetics, only problem was that i needed new endlinks due to my big exhaust. but other than that it was a great purchase
11/7/2009 by Inertrage
A Must Have for you RSX
I Installed it today WOW its like a whole new car! You dont even feel like you are making a hard turn. If you own an RSX you must order right now!!
7/22/2009 by walk
pictured bar is upside down!
The guy in the pictures to the left (<----) installed his UPSIDE DOWN! Do not install it like that! The bump on the end should go UP and the middle part should arc UPward! That said, I've had this bar for about 5 years now, very nice except you WILL break your endlinks if you race/auto-x with it. Get some stronger aftermarket endlinks. Also tends to rub on the exhaust (stock), might try a rubber bushing or something there (or a different exhaust).
12/28/2008 by Travis
Progress rear sway
Great product and its super easy to do yourself. You can really feel the difference between the oem and the progress sway and it looks a lot better than stock too.
10/18/2008 by Ricky D.
The experience is awesome, i was pretty satisfied that with a lot of help we got this combo on in 45 minuites, we used a lift. As soon as we lowered the car to the ground the rear end felt so stiff and ready. It turned with ease, very noticible compared to my sisters 06 DC5. I love the mod! Buy from ClubRsx!
9/13/2008 by charlie
progress sway bars
Purchased front and rear progress sway bars. Bars look and handle great. Great for show! I can tell the difference... works great with my suspension set up in my vbp dc5. can take corners great! thanks again! great item!
8/21/2008 by peter
it felt great when i put it on, i didnt know it was the sway bar that was making the knocking noises on corners but other from that it stiffened my rear end right up!
7/26/2008 by Don
I definitely feel the difference. I can take turns around 10-15% faster than i was. Only thing is it rubbed on my Comptech 2.5 inch exhaust, but a rubber heat tube and some clamps around the bar solved that.
7/23/2008 by BULLET
progress rear sway car
looks and handles great now, also one of my favorite recent mods
4/29/2008 by Paul
Improve Cornerin' and Better Than my Stock 19mm
this is probably one my favorite mods, i could definitely feel the difference from the get-go. The car feels more stable especially in hard and fast cornerin', it eliminated most of the understeer.
4/9/2008 by Ed
I've had the progress sway bar and tie bar for about a month and I must say it is one of my favorite purchases to this date. It really gives that feel of having a rear wheel drive car when installed. Great bang for the buck if you get it from CRSX. The only qualm i have about the product is that it is about 1mm away from the exhaust box. whenever i start the engine, i'll get a 1-2 knocks/bangs. But this happens to a lot of people with an aftermarket sway bar. The pros definitely outweigh the cons though. Buy it with confidence.