Hawk HPS Brake Pads: Rear
HPS - High Performance Street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance's HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology.
The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you will have a highly durable brake pad with less brake dust.
All Hawk Performance High Performance Street brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer's workmanship and materials.
Hawk Performance burnishes its High Performance Street brake pads as a final step in the factory, but all brake pads have to be bedded-in with the rotors (new or used) that they will be used against. Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance.
How To Bed-In/Burnish Brake Pads
- After installing new brake pads, make 6-to-10 stops from approximately 30-35 MPH applying moderate pressure.
- Make an additional 2-to-3 hard stops from approximately 40-45 MPH.
- DO NOT DRAG BRAKES!
- Allow at least 15 minutes for the brake system to cool down.
- After step 4 is completed, your new Hawk Performance brake pads are ready for use.
- Part Number: HB572F.570
- Manufacturer: Hawk Performance
- CR-V LX Only
- Honda CR-V
- 2002 Honda CR-V All
- 2003 Honda CR-V All
- 2004 Honda CR-V All
- Honda Element
- 2003 Honda Element All
- 2004 Honda Element All
- 2005 Honda Element All
- 2006 Honda Element All
- 2007 Honda Element All
- 2008 Honda Element All
- 2009 Honda Element All
- 2010 Honda Element All
- 2011 Honda Element All