Images may be for reference only
Product Details
The ID1050x is the evolution of the ID1000, and the latest addition to the X-Series. It is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport, and is the result of lessons learned during development of the ID1300x, and ID1700x.
- Corrosion resistant internals make it compatible with all known fuels, capable of extended service life with corrosive fuels.
- Compact body allows fitment in 200+ applications, including current and future engines utilizing short body injectors.
- Improved internal flow path increases output by 5% without sacrificing low flow performance.
- Stronger magnetic circuit offers stable operation up to 10 bar.
- Replaceable inlet filter extends service life.
- High Impediance Injector, no resistor box required
- These injectors flow 1535cc/min at 100psi of fuel pressure
- They are a 48mm long body, shorter than normal injectors. The adaptor tops make them "normal" 60mm length and adapt them to 11mm (B series) or 14mm (K series) orings. The K series guys can run the injectors with no adaptors at all and they are the same length as the OEM rsx injectors so no spacers needed on the rail.
| Part Number: | 1050.48.14.14.4 |
| Brand: | Injector Dynamics |
| Size: | 1000cc |
| CARB Approved: | No |
Not legal for sale or use in California on any pollution controlled motor vehicles. See http://www.semasan.com/emissions for state by state emissions requirements.
There is a 5% cancellation fee if you order this product and want to ship it to the state of California.
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
| Year | Make | Model | Trim |
|---|---|---|---|
| 2002 | Acura | RSX | Base |
| 2002 | Acura | RSX | Type-S |
| 2002 | Honda | Civic | Si |
| 2003 | Acura | RSX | Base |
| 2003 | Acura | RSX | Type-S |
| 2003 | Honda | Civic | Si |
| 2004 | Acura | RSX | Base |
| 2004 | Acura | RSX | Type-S |
| 2004 | Acura | TSX | Base |
| 2004 | Honda | Civic | Si |
| 2005 | Acura | RSX | Base |
| 2005 | Acura | RSX | Type-S |
| 2005 | Acura | TSX | Base |
| 2005 | Honda | Civic | Si |
| 2006 | Acura | RSX | Base |
| 2006 | Acura | RSX | Type-S |
| 2006 | Acura | TSX | Base |
| 2006 | Honda | Civic | Si |
| 2006 | Honda | S2000 | Base |
| 2007 | Acura | TSX | Base |
| 2007 | Honda | Civic | Si |
| 2007 | Honda | S2000 | Base |
| 2008 | Acura | TSX | Base |
| 2008 | Honda | Civic | MUGEN Si |
| 2008 | Honda | Civic | Si |
| 2008 | Honda | S2000 | Base |
| 2008 | Honda | S2000 | CR |
| 2009 | Acura | TSX | Base |
| 2009 | Honda | Civic | Si |
| 2009 | Honda | S2000 | Base |
| 2009 | Honda | S2000 | CR |
| 2010 | Acura | TSX | Base |
| 2010 | Acura | TSX | V6 |
| 2010 | Honda | Civic | Si |
| 2011 | Honda | Civic | Si |
Engine Fitment
| Engine |
|---|
| Honda 2.0L/1998CC - 4 Cylinder (K20A3) |
| Honda 2.0L/1998CC - 4 Cylinder (K20A2) |
| Honda 2.4L/2354CC - 4 Cylinder (K24A2) |
| Honda 2.0L/1998CC - 4 Cylinder (K20Z1) |
| Honda 2.2L/2157CC - 4 Cylinder (F22C1) |
| Honda 2.0L/1998CC - 4 Cylinder (K20Z3) |
| Honda 2.4L/2354CC - 4 Cylinder (K24Z3) |
3 Reviews ★★★★★
0
0
0
0
3
Zonum | June 28th, 2025
Absolutely the best in the industry to buy your parts with no issues just results and the best parts ready to go thank you guys!
Erik | November 20th, 2009
Good stuff, 1000cc injectors in mildly modded wrx, idles/drive at least as good as stock. Dont bother with stair stepping your injectors as the power goes up because you are worried about idle quality, just put these in once and be done.
Bryan Ngo | April 6th, 2009
run pretty much like stock injectors, great!
