Manufactured to Honda's original factory specifications, this black plastic retaining clip provides the proper fit and holding strength required for compatible Honda and Acura applications. Its push-type design allows for straightforward installation without the need for special mounting hardware.

Fender liner clips are small but important components that help secure protective panels around the wheel wells and underbody. These panels help shield surrounding components from road debris, dirt, water, and other contaminants encountered during normal driving.

Over time, factory plastic clips can become brittle, crack, break, or go missing during routine maintenance and repairs. Replacing damaged or missing clips with genuine Honda replacements helps restore proper panel attachment and maintain the vehicle's original fit and appearance.

Whether you're replacing a damaged inner fender liner, removing a front bumper, performing engine maintenance, or restoring your Honda or Acura, the Genuine Honda 91501-S04-003 Fender Clip provides an affordable and dependable OEM replacement solution.

Features

• Genuine Honda OEM Part: Manufactured to Honda's original equipment specifications for proper fitment and dependable performance.

• Factory Fender Liner Retainer: Designed to secure compatible inner fender liners, splash shields, and plastic body panels.

• Durable Plastic Construction: Engineered to withstand normal automotive operating conditions and exposure to road debris.

• Black OEM Finish: Matches the appearance of original Honda plastic retaining fasteners.

• Push-Type Installation: Designed for convenient installation into compatible factory mounting holes.

• Secure Panel Retention: Helps keep protective body panels properly attached during vehicle operation.

• Helps Reduce Rattling: Replaces missing or damaged clips that may allow plastic panels to vibrate or move.

• Direct OEM Replacement: Installs without modification when used in the correct factory application.

• Multiple Factory Applications: Used in various Honda and Acura body panel and splash shield mounting locations.

• Ideal for Restoration Projects: Helps maintain factory appearance and original panel fitment.

• Cost-Effective Maintenance: An inexpensive solution for replacing broken or missing body panel fasteners.

• Sold Individually: Allows customers to purchase the exact quantity needed for their repair.

Popular Performance and Maintenance Applications

• Inner fender liner replacement

• Front bumper removal and installation

• Splash shield replacement

• Engine bay maintenance requiring body panel removal

• Suspension upgrades involving fender liner removal

• Honda and Acura restoration projects

• K-Series engine swap projects

• Aftermarket bumper and body panel installations retaining compatible OEM mounting points

• Replacement of missing or damaged factory plastic fasteners

Important Fitment Note: This clip is used in multiple locations across various Honda and Acura vehicles. Not every fender liner, splash shield, or body panel uses the same fastener. Verify Honda part number 91501-S04-003 against the appropriate OEM parts diagram before ordering.

Additional Information

Manufacturer: Honda Motor Co., Ltd.

Brand: Genuine Honda OEM

Honda Part Number: 91501-S04-003

Product Name: Inner Fender Liner Retainer Clip

OEM Description: Clip, Fender (Inner)

Alternative Names: Fender Clip, Fender Liner Clip, Splash Shield Retainer Clip, Plastic Push Clip, Body Panel Retainer, Fender Liner Fastener

Component Type: Automotive Body Panel Retaining Fastener

Material: Automotive-Grade Plastic

Color: Black

Fastener Style: Push-Type Retaining Clip

Primary Installation Location: Inner Fender Liner / Wheel Well

Additional Installation Locations: Select Splash Shields, Underbody Panels, and Other Compatible Factory Body Panel Mounting Points

Fitment Type: Direct OEM Replacement

Condition: New

Quantity: Sold Individually

Previous Honda Part Numbers Listed as Replacements:

• 91504-SF4-003

• 91512-SM4-003

• 90675-SB0-003

• 90675-SB3-003

• 90675-SB0-000

• 08P21-SL5-200R1

Additional Notes: Replacement and supersession compatibility may vary by application. Confirm the original fastener and mounting location before substituting part numbers.

Common Reasons for Replacement

• Broken Fender Clips: Plastic retaining clips can crack or break during removal, installation, or normal vehicle operation.

• Missing Fasteners: Clips may become lost during bumper removal, fender liner replacement, or previous maintenance.

• Loose Fender Liners: Missing or damaged clips can allow inner fender liners to move, sag, or contact surrounding components.

• Rattling or Vibration: Improperly secured plastic panels may produce unwanted noises while driving.

• Aging Plastic: Repeated exposure to heat, moisture, and environmental conditions can cause older plastic clips to become brittle.

• Body Panel Repairs: Replacement clips may be needed after collision repairs, bumper replacement, or bodywork.

• Suspension Maintenance: Fender liner removal during suspension repairs can damage or dislodge existing fasteners.

• Preventative Maintenance: Replacing worn or missing clips helps maintain proper panel attachment and reduce the risk of future damage.

Installation Notes

1. Verify Compatibility: Confirm that Honda part number 91501-S04-003 is correct for the specific mounting location on your vehicle.

2. Locate the Mounting Position: Identify the factory mounting hole in the fender liner, splash shield, or applicable plastic panel.

3. Remove the Existing Fastener: If an old clip is present, carefully remove it using a suitable plastic trim removal tool to avoid damaging the surrounding panel.

4. Inspect the Mounting Hole: Check the panel and mounting surface for cracks, damage, or enlarged holes that could prevent the new clip from securing properly.

5. Align the Panels: Position the fender liner or splash shield so the mounting holes line up correctly.

6. Prepare the New Clip: Ensure the retaining clip is in the proper installation position before inserting it.

7. Install the Retainer: Insert the clip into the aligned mounting holes and engage its retaining mechanism until the panel is securely fastened.

8. Check Panel Security: Gently inspect the installed panel to ensure the clip is fully seated and the panel does not move excessively.

9. Inspect Nearby Fasteners: Check surrounding clips and mounting hardware for damage or missing components.

10. Verify Clearance: Make sure the fender liner or splash shield is properly positioned and does not interfere with tires, suspension components, or other moving parts.

Installation Recommendation: Plastic retaining clips can become damaged during removal. Replacing broken or weakened clips rather than reusing them helps ensure secure panel attachment.

What's Included

• (1) Genuine Honda Inner Fender Liner Retainer Clip – Part Number 91501-S04-003

Note: Quantity 1 equals one individual retaining clip. Multiple clips may be required depending on the vehicle and the panel being serviced.

Fender liners, splash shields, bumpers, and additional mounting hardware are sold separately unless otherwise specified.

The Genuine Honda Inner Fender Liner Retainer Clip (91501-S04-003) is an essential OEM replacement fastener for maintaining secure attachment of compatible Honda and Acura fender liners, splash shields, and plastic body panels.

Featuring durable black plastic construction, convenient push-type installation, and genuine Honda factory fitment, this retaining clip provides a simple and affordable solution for replacing broken, missing, or worn factory fasteners.

Whether you're completing routine maintenance, replacing a damaged fender liner, performing suspension upgrades, or restoring your Honda or Acura, genuine Honda retaining clips help ensure your vehicle's protective panels remain properly secured.