Restore secure factory mounting of your Honda or Acura's bumper covers, splash shields, fender liners, and protective body panels with the Genuine Honda Bumper Cover Retainer Clip (91503-SZ3-003). This original equipment replacement fastener is designed to hold compatible exterior and underbody panels securely in place, helping maintain proper fitment and prevent unwanted movement or rattling.

Manufactured to Honda's original equipment specifications, this black plastic push-type retainer provides dependable holding strength for factory mounting locations. Its convenient push-pin design allows for straightforward installation and removal during routine maintenance, bodywork, and repairs.

Bumper cover clips and plastic retainers are small but essential components that help maintain the integrity of your vehicle's exterior panels. They secure components such as bumper covers, radiator support covers, wheel well liners, and underbody splash shields, helping protect surrounding components from dirt, water, and road debris.

Over time, exposure to heat, moisture, and repeated removal can cause plastic retaining clips to become brittle, crack, or break. Missing or damaged clips can allow body panels to sag, vibrate, or become improperly aligned.

Whether you're replacing a damaged bumper cover, reinstalling an underbody splash shield, or completing a Honda or Acura restoration project, the Genuine Honda 91503-SZ3-003 Retainer Clip provides a reliable and affordable OEM replacement solution.

Features

• Genuine Honda OEM Part: Manufactured to Honda's original factory specifications for proper fitment and dependable performance.

• Factory Bumper Cover Retainer: Designed to secure compatible bumper covers, splash shields, and plastic body panels.

• Durable Plastic Construction: Provides reliable retention while resisting normal exposure to automotive operating conditions.

• Black OEM Finish: Maintains the factory appearance of original Honda and Acura retaining hardware.

• Push-Type Fastener Design: Allows for convenient installation into compatible factory mounting holes.

• Secure Panel Attachment: Helps prevent bumper covers and protective panels from becoming loose or misaligned.

• Helps Reduce Rattling: Replaces damaged or missing fasteners that can cause unwanted panel vibration.

• Multiple Mounting Applications: Used in various bumper, fender liner, splash shield, and underbody panel locations.

• Direct OEM Replacement: Installs without modification when used in the correct factory application.

• Ideal for Body Panel Repairs: Recommended during bumper replacement, splash shield removal, and exterior trim maintenance.

• Restoration-Friendly Design: Helps maintain original factory panel fitment and appearance.

• Cost-Effective Replacement: An affordable solution for replacing broken, worn, or missing factory fasteners.

Popular Performance and Maintenance Applications

• Front and rear bumper cover installation

• Aftermarket bumper installation using factory mounting locations

• Inner fender liner replacement

• Engine undertray and splash shield repairs

• Radiator support cover removal and installation

• K-Series engine swap projects

• Suspension maintenance requiring splash shield removal

• Honda and Acura restoration projects

• Replacement of missing or broken factory body panel clips

Important Fitment Note: This retainer is used in multiple locations across different Honda and Acura models. Not every bumper, fender liner, or splash shield uses the same clip. Always verify Honda part number 91503-SZ3-003 against the appropriate OEM parts diagram before ordering.

Additional Information

Manufacturer: Honda Motor Co., Ltd.

Brand: Genuine Honda OEM

Honda Part Number: 91503-SZ3-003

Product Name: Bumper Cover Retainer Clip

OEM Description: Clip A, Bumper

Alternative Names: Bumper Clip, Bumper Cover Retainer, Under Cover Retainer Clip, Splash Shield Clip, Fender Liner Clip, Plastic Push Clip, Body Panel Fastener

Component Type: Automotive Body Panel Retaining Fastener

Material: Automotive-Grade Plastic

Color: Black

Fastener Style: Push-Type Retainer Clip

Head Diameter: Approximately 20mm

Compatible Mounting Hole Diameter: Approximately 10mm

Primary Installation Location: Bumper Cover and Associated Mounting Panels

Additional Installation Locations: Select Fender Liners, Splash Shields, Underbody Covers, Radiator Support Covers, and Exterior Trim Panels

Fitment Type: Direct OEM Replacement

Condition: New

Quantity: Verify the seller's packaging configuration. This part number is offered as both individual clips and multipacks by different suppliers.

Additional Notes: Dimensions are approximate reference measurements. Compare the original fastener and mounting hole before installation.

Common Reasons for Replacement

• Broken Bumper Clips: Factory plastic retaining clips can crack or break during bumper removal or installation.

• Missing Fasteners: Clips may become lost during previous repairs, maintenance, or body panel replacement.

• Loose Bumper Covers: Missing or damaged retainers can allow bumper covers to sag or become misaligned.

• Rattling or Vibration: Improperly secured plastic panels can produce unwanted noises while driving.

• Aging Plastic: Exposure to heat, moisture, and environmental conditions can cause plastic fasteners to become brittle.

• Damaged Splash Shields: Missing clips can allow protective underbody panels to hang loose or contact the road.

• Collision Repairs: Replacement fasteners may be required when reinstalling bumper covers and exterior trim after bodywork.

• Preventative Maintenance: Replacing worn or weakened clips helps maintain proper panel retention and prevent additional damage.

Installation Notes

1. Verify Compatibility: Confirm that Honda part number 91503-SZ3-003 is correct for your vehicle and the specific mounting location.

2. Locate the Mounting Position: Identify the factory mounting holes in the bumper cover, fender liner, splash shield, or applicable body panel.

3. Remove the Existing Clip: If an old fastener is installed, carefully release its center pin and remove the retaining clip using a suitable trim removal tool.

4. Inspect the Mounting Holes: Check the plastic panels and mounting surfaces for cracks, damage, or enlarged holes that could prevent secure installation.

5. Align the Panels: Position the bumper cover or protective panel so the mounting holes align correctly.

6. Prepare the New Retainer: Ensure the center pin is in the appropriate installation position before inserting the clip.

7. Install the Clip: Insert the retainer into the aligned mounting holes and press the center pin into place until the fastener is securely engaged.

8. Verify Proper Seating: Confirm that the clip sits flush against the panel and provides adequate holding strength.

9. Inspect Surrounding Fasteners: Check nearby mounting clips for damage or missing hardware, replacing additional fasteners as needed.

10. Check Panel Clearance: Verify that the bumper cover, fender liner, or splash shield is properly secured and does not interfere with tires, suspension components, or moving engine parts.

Installation Recommendation: Plastic push-type clips can become damaged during removal. Replacing cracked, distorted, or weakened retainers helps maintain secure factory panel attachment.

What's Included

• Genuine Honda Bumper Cover Retainer Clip – Part Number 91503-SZ3-003

Note: Confirm the quantity supplied by the specific product listing before ordering. Bumper covers, fender liners, splash shields, and additional mounting hardware are sold separately unless otherwise specified.

The Genuine Honda Bumper Cover Retainer Clip (91503-SZ3-003) is an essential OEM replacement fastener for maintaining secure attachment of compatible Honda and Acura bumper covers, splash shields, fender liners, and exterior body panels.

Featuring durable black plastic construction, convenient push-type installation, and genuine Honda factory specifications, this retaining clip provides a dependable solution for replacing broken, missing, or worn body panel fasteners.

Whether you're performing routine maintenance, replacing a damaged bumper cover, completing suspension work, or restoring your Honda or Acura, genuine Honda retaining clips help ensure your vehicle's protective panels remain properly secured.