Designed to improve drivetrain stability, reduce excessive engine movement, and provide increased durability over aging factory rubber or hydraulic mounts, this complete three-mount performance kit is an excellent upgrade for daily-driven vehicles, modified street cars, and high-horsepower J-Series builds.

Factory Honda and Acura engine mounts prioritize vibration isolation and passenger comfort. Over time, original rubber bushings and fluid-filled mounting components can deteriorate, crack, leak, or separate, allowing excessive drivetrain movement during acceleration, deceleration, and gear changes. This movement becomes especially noticeable in modified applications where additional horsepower and torque place increased stress on the factory mounting system.

Innovative Mounts addresses these limitations with heavy-duty steel construction, precision billet accessories, and specially engineered polyurethane bushings. The upgraded mounting system helps maintain consistent engine and transmission positioning under load, reducing unwanted drivetrain movement and improving overall driving response.

Unlike traditional factory hydraulic mounts, the Innovative Mounts 10750 utilizes performance-oriented polyurethane bushings that eliminate the original fluid-filled damping arrangement. This provides a firmer connection between the drivetrain and chassis, helping reduce drivetrain deflection, improve shifting consistency, and minimize conditions that contribute to wheel hop.

The kit includes front, rear, and passenger-side engine mounts, providing a coordinated replacement solution rather than upgrading only one mounting location. Each component is designed to work with the others to improve drivetrain support while maintaining the appropriate engine positioning for compatible factory applications.

Innovative Mounts' unique no-tear polyurethane bushing design provides increased resistance to engine movement while retaining vibration isolation appropriate to the selected bushing hardness. Multiple durometer options allow enthusiasts to choose a setup suited to their intended driving style, from street performance to dedicated racing applications.

Whether you're replacing deteriorated factory mounts on your Honda Accord V6, upgrading the drivetrain stability of your Acura TL Type-S, or preparing a J-Series-powered performance build for additional horsepower, the Innovative Mounts 10750 delivers dependable drivetrain support and performance-oriented durability.

Features

• Complete Three-Mount Replacement Kit: Includes front, rear, and passenger-side engine mounts.

• Heavy-Duty Steel Construction: Durable steel mounting components engineered for increased strength and drivetrain support.

• Precision Billet Accessories: Machined components provide additional mounting support and proper installation geometry.

• J-Series V6 Compatibility: Designed for compatible Honda and Acura J-Series V6 applications.

• Manual and Automatic Transmission Compatibility: Supports manufacturer-listed manual and automatic transmission configurations.

• Reduced Engine Movement: Helps minimize excessive engine rocking during acceleration, deceleration, and shifting.

• Improved Drivetrain Response: Firmer polyurethane bushings reduce unwanted drivetrain deflection under load.

• Reduced Wheel Hop: Helps control engine movement that can contribute to wheel hop during aggressive acceleration.

• Innovative No-Tear Polyurethane Bushings: Designed for durability and vibration control.

• Hydraulic Mount Replacement: Replaces factory fluid-filled mounting components with performance-oriented polyurethane assemblies where applicable.

• Multiple Bushing Hardness Options: Available in 75A, 85A, and 95A configurations, with a 60A street option also offered through select listings.

• Factory Replacement Design: Engineered for compatible factory mounting locations and drivetrain configurations.

• Coordinated Mounting System: Upgrades multiple drivetrain mounting locations together for consistent support.

• CAD/CAM Designed: Developed using computer-aided engineering for accurate fitment and manufacturing consistency.

• Stress Analyzed: Engineered for demanding street and performance driving conditions.

• Installation Hardware Included: Supplied with application-specific mounting hardware and accessories.

• Lifetime Manufacturer Warranty: Backed by Innovative Mounts' lifetime warranty, subject to manufacturer terms.

Important Fitment Requirements:

• Designed for compatible J-Series V6 engine applications.

• Intended for factory-style engine and transmission configurations within the manufacturer-listed chassis.

• Not designed for four-cylinder Honda Accord applications.

• Not compatible with factory K24-powered Acura TSX models.

• Not intended for universal J-Series engine swaps into unrelated chassis.

• For compatible K-Series Accord and TSX applications, see Innovative Mounts 10751.

• Verify engine, transmission, and chassis compatibility before installation.

Popular Performance Applications

2003–2007 Honda Accord V6 Performance Builds

An excellent upgrade for Accord V6 owners seeking improved drivetrain stability and reduced engine movement compared with aging factory mounts.

2004–2008 Acura TL Performance Upgrades

Provides improved engine and transmission support for J32-powered Acura TL applications, helping minimize unwanted drivetrain movement during aggressive acceleration.

2007–2008 Acura TL Type-S Performance Builds

Ideal for compatible J35A8-powered TL Type-S applications where increased engine torque places additional stress on factory mounting components.

2010–2014 Acura TSX V6 Upgrades

Provides a performance-oriented engine mounting solution for compatible J35Z6-powered Acura TSX V6 applications.

Naturally Aspirated J-Series Builds

Suitable for engines equipped with performance intake systems, upgraded exhaust components, camshaft modifications, and other naturally aspirated enhancements.

Supercharged J-Series Applications

Helps reduce excessive drivetrain movement in compatible supercharged builds producing increased horsepower and torque.

Turbocharged J-Series Performance Builds

Provides firmer engine and transmission support for modified J-Series applications where additional torque places greater demands on factory mounting components.

Street Performance Applications

The available street-oriented polyurethane bushing configurations provide improved drivetrain rigidity while retaining some vibration isolation.

Track and Competition Builds

Higher-durometer polyurethane bushings provide increased resistance to drivetrain movement during aggressive acceleration, braking, and shifting.

Factory Engine Mount Replacement

An excellent performance-oriented alternative for replacing multiple worn, cracked, or leaking original engine mounts.

Additional Information

• Manufacturer: Innovative Mounts
• Part Number: 10750
• Product Type: Steel Replacement Engine Mount Kit
• Mount Construction: Solid Steel with Billet Accessories
• Bushing Material: Polyurethane
• Number of Mounts: 3
• Mounting Positions: Front / Rear / Passenger Side
• Primary Vehicle Applications: 2003–2007 Honda Accord V6 / 2004–2008 Acura TL / 2010–2014 Acura TSX V6
• Engine Compatibility: Honda/Acura J-Series V6
• Transmission Compatibility: Manual / Automatic, Depending on Application
• Installation Type: Factory Replacement
• Approximate Kit Weight: 17 lbs
• Manufacturer Warranty: Lifetime Limited Warranty

Individual Mount Components:

• 10720: Passenger-Side Engine Mount

• 10730: Rear Engine Mount

• 10740: Front Engine Mount

Additional Mounting Components:

• B10720: Engine Block Post Mounting Bracket

• 10720-SB: Engine Block Mounting Bracket

• 10750-AW: Aluminum Mounting Crown

• Application-Specific Aluminum Washers and Mounting Hardware

Available Polyurethane Bushing Hardness Options:

• 60A – Street: Softer polyurethane configuration prioritizing vibration isolation and everyday driving comfort. Availability varies by listing.

• 75A – Black: Street and performance configuration offering increased drivetrain rigidity. Manufacturer-recommended for approximately 250–400 HP.

• 85A – Gray: Track and performance-oriented configuration designed to reduce drivetrain movement. Manufacturer-recommended for approximately 400–500 HP.

• 95A – Red: Race-oriented configuration designed for maximum drivetrain control. Manufacturer-recommended for applications exceeding 500 HP.

Bushing Selection Note: Horsepower ranges are general manufacturer recommendations rather than guaranteed capacity limits. Actual selection should consider engine torque, vehicle use, drivetrain configuration, and acceptable vibration levels.

Common Reasons for Replacement

• Worn Factory Engine Mounts: Aging rubber and hydraulic mounts can deteriorate, crack, leak, or separate, allowing excessive drivetrain movement.

• Leaking Hydraulic Mounts: Factory fluid-filled mounting components can lose their vibration-control characteristics when damaged.

• Excessive Engine Rocking: Unwanted engine movement during acceleration and deceleration can negatively affect drivetrain response.

• Engine Movement During Shifting: Firmer polyurethane bushings help maintain more consistent drivetrain positioning during gear changes.

• Wheel Hop During Acceleration: Reduced drivetrain movement can help minimize conditions that contribute to wheel hop.

• High-Horsepower J-Series Builds: Increased engine torque places additional stress on factory mounting components.

• Broken or Damaged Mount Bushings: Replace deteriorated factory rubber mounts with durable polyurethane components.

• Improved Drivetrain Response: Reduced mount deflection provides a more direct connection between engine output and vehicle movement.

• Coordinated Mount Replacement: Replacing multiple mounts together helps avoid retaining worn components that allow unwanted movement.

• Street and Track Performance: Improve drivetrain stability during demanding driving conditions.

• Long-Term Drivetrain Maintenance: Replace aging original engine mounts with a performance-oriented mounting system.

Installation Notes

1. Verify Vehicle Compatibility: Confirm that the vehicle is a compatible 2003–2007 Honda Accord V6, 2004–2008 Acura TL, or 2010–2014 Acura TSX V6.

2. Confirm Engine Configuration: This kit is designed for supported J-Series V6 applications. It is not intended for factory K-Series four-cylinder configurations.

3. Verify Transmission Compatibility: Confirm the vehicle uses a manufacturer-supported manual or automatic transmission configuration.

4. Support the Engine and Transmission: Properly support the drivetrain before removing the factory mounts to prevent unexpected movement or damage.

5. Remove Existing Engine Mounts: Follow the appropriate Honda or Acura service procedures when removing the original front, rear, and passenger-side mounting components.

6. Inspect Factory Mounting Locations: Check the chassis mounting points, engine brackets, transmission brackets, and surrounding components for damage or excessive wear.

7. Install the Required Engine Block Brackets: Position the supplied mounting brackets and accessories according to Innovative Mounts' installation instructions.

8. Install the Passenger-Side Engine Mount: Position the Innovative Mounts 10720 assembly and associated brackets, ensuring proper orientation and alignment.

9. Install the Rear Engine Mount: Position the Innovative Mounts 10730 assembly in the factory rear mounting location.

10. Install the Front Engine Mount: Position the Innovative Mounts 10740 assembly in the factory front mounting location.

11. Use Supplied Installation Hardware: Install the manufacturer-supplied bolts, washers, nuts, and aluminum mounting components in their designated locations.

12. Inspect Factory Hardware: Examine original mounting bolts and fasteners before reuse where specified. Replace damaged or excessively worn hardware.

13. Align the Drivetrain: Ensure the engine and transmission are correctly positioned before final tightening to prevent unnecessary bushing preload.

14. Torque Mounting Hardware: Tighten all fasteners according to the applicable Honda/Acura and Innovative Mounts specifications.

15. Verify Component Clearance: Inspect clearance around the engine, transmission, exhaust system, intake components, and surrounding chassis structure before operating the vehicle.

16. Select the Appropriate Bushing Hardness: Choose the polyurethane durometer that best matches the vehicle's horsepower level, intended use, and acceptable vibration.

17. Expect Increased Engine Vibration: Performance polyurethane mounts generally transmit more engine vibration into the chassis than factory rubber or hydraulic mounts. Higher-durometer bushings typically increase vibration further.

18. Inspect After Installation: Recheck mounting hardware, drivetrain alignment, and surrounding component clearances after the initial driving period.

19. Professional Installation Recommended: Installation by an experienced Honda/Acura technician is strongly recommended.

20. Confirm Fitment Before Bolting Down: Innovative Mounts states that mounts showing installation bolt impressions cannot be returned or exchanged. Verify all mounting requirements before installation.

What's Included

• (1) Front Engine Mount – Innovative Mounts 10740

• (1) Rear Engine Mount – Innovative Mounts 10730

• (1) Passenger-Side Engine Mount – Innovative Mounts 10720

• (1) Engine Block Post Mounting Bracket – B10720

• (1) Engine Block Mounting Bracket – 10720-SB

• (2) Aluminum Mounting Crowns – 10750-AW

• (2) Aluminum Washers

• (3) M12 x 1.25 x 100 mm Bolts

• (2) M12 x 1.25 x 30 mm Bolts

• (4) 12 mm Washers

• (3) 12 mm Nuts

• Polyurethane Bushings in the Selected Durometer

Important: This product is a three-mount replacement engine mount kit with the associated installation brackets and hardware. It is not a universal J-Series engine swap kit.

Verify the contents of the current manufacturer packaging before installation, particularly if ordering a specialized configuration or bushing option.

Upgrade your Honda or Acura J-Series drivetrain with the Innovative Mounts Steel Replacement Engine Mount Kit (10750), engineered for compatible 2003–2007 Honda Accord V6, 2004–2008 Acura TL, and 2010–2014 Acura TSX V6 applications.

Featuring heavy-duty steel construction, precision billet mounting accessories, Innovative Mounts' no-tear polyurethane bushings, and multiple bushing hardness options, this complete three-mount replacement kit provides improved drivetrain stability, reduced engine movement, and more responsive power delivery.

Whether you're replacing worn factory engine mounts, upgrading your daily-driven Accord V6, or building a high-performance Acura TL Type-S, Innovative Mounts delivers the strength, durability, and drivetrain control enthusiasts demand.