Upgrade your Acura TL drivetrain with the Innovative Mounts Steel Manual Transmission Mount Kit (10755), designed specifically for 2004–2008 Acura TL applications equipped with J-Series V6 engines and factory manual transmissions.

Engineered to improve drivetrain stability, reduce excessive engine and transmission movement, and provide increased durability compared with aging factory rubber mounts, this performance-oriented replacement kit is an excellent upgrade for daily-driven vehicles, modified street cars, and dedicated performance builds.

Factory Acura engine and transmission mounts are designed primarily to isolate engine vibration and maintain passenger comfort. Over time, original rubber mounting components can deteriorate, crack, or separate, allowing excessive drivetrain movement during acceleration, deceleration, and shifting.

This unwanted movement becomes particularly noticeable in modified J-Series applications where increased horsepower and torque place additional stress on the factory mounting system. Excessive drivetrain movement can contribute to wheel hop, inconsistent shifting feel, and unnecessary stress on surrounding components.

Innovative Mounts addresses these limitations with heavy-duty steel construction and specially engineered polyurethane bushings. The upgraded design helps maintain more consistent drivetrain positioning under load, reducing unwanted movement and improving overall responsiveness.

Unlike conventional factory rubber mounts, Innovative Mounts' performance-oriented polyurethane bushings provide a firmer connection between the drivetrain and chassis. The company's unique tapered bushing design is engineered to reduce binding while progressively absorbing engine movement and vibration.

The Innovative Mounts 10755 is designed specifically for the third-generation Acura TL UA6/UA7 chassis with a J-Series V6 engine and manual transmission. It is compatible with the 3.2L J32A3-powered TL and applicable 3.5L J35A8-powered TL Type-S models.

Available in multiple polyurethane bushing hardness options, the Innovative Mounts 10755 allows enthusiasts to choose the appropriate balance between everyday driving comfort and performance-oriented drivetrain rigidity.

Whether you're replacing worn factory transmission mounts, improving shifting consistency in your six-speed Acura TL, or preparing your TL Type-S for increased horsepower, the Innovative Mounts 10755 delivers the durability and drivetrain control needed for demanding applications.

Features

• Manual Transmission Mount Kit: Designed specifically for factory manual transmission-equipped 2004–2008 Acura TL applications.

• J-Series V6 Compatibility: Engineered for compatible J32A3 and J35A8-powered Acura TL configurations.

• UA6/UA7 Chassis Fitment: Designed for the third-generation Acura TL platform.

• Heavy-Duty Steel Construction: Durable steel mounting components provide increased strength and resistance to drivetrain movement.

• Factory Rubber Mount Replacement: Replaces compatible original rubber mounting components with performance-oriented polyurethane assemblies.

• Reduced Drivetrain Movement: Helps minimize excessive engine and transmission movement during acceleration, deceleration, and shifting.

• Improved Shifting Consistency: Firmer drivetrain mounting can help reduce movement that affects shifting feel under load.

• Improved Drivetrain Response: Polyurethane bushings provide increased resistance to drivetrain deflection.

• Reduced Wheel Hop: Helps control drivetrain movement that can contribute to wheel hop during aggressive acceleration.

• Innovative No-Tear Polyurethane Bushings: Designed for durability, vibration control, and resistance to demanding driving conditions.

• Tapered Bushing Design: Engineered to minimize binding and progressively absorb drivetrain movement.

• Multiple Bushing Hardness Options: Available in 60A, 75A, 85A, and 95A polyurethane configurations.

• Street and Competition Applications: Suitable for daily-driven performance vehicles, modified street cars, and track-oriented builds.

• Vehicle-Specific Replacement Design: Intended for compatible factory Acura TL manual transmission mounting configurations.

• Lifetime Manufacturer Warranty: Backed by Innovative Mounts' lifetime warranty, subject to manufacturer terms.

Popular Performance Applications

2004–2008 Acura TL 6-Speed Manual Builds

An excellent upgrade for manual transmission-equipped TL owners seeking improved drivetrain stability and reduced movement compared with deteriorated factory mounts.

2007–2008 Acura TL Type-S Performance Builds

Provides firmer drivetrain support for J35A8-powered TL Type-S applications, helping minimize unwanted engine and transmission movement during aggressive acceleration.

Naturally Aspirated J32 and J35 Builds

Suitable for compatible vehicles equipped with performance intake systems, upgraded exhaust components, engine management, and other naturally aspirated modifications.

Supercharged Acura TL Applications

Helps reduce excessive drivetrain movement in compatible supercharged builds producing increased horsepower and torque.

Turbocharged J-Series Performance Builds

Provides additional drivetrain stability for modified J-Series applications where increased torque places greater demands on factory mounting components.

Street Performance Applications

The available 60A and 75A polyurethane bushing configurations allow drivers to select a balance between vibration isolation and increased drivetrain rigidity.

Track and Autocross Builds

Higher-durometer polyurethane bushings help maintain more consistent drivetrain positioning during aggressive acceleration, braking, and cornering.

Drag Racing Applications

The 85A and 95A bushing configurations provide increased resistance to drivetrain movement during hard launches and high-load shifting.

Factory Manual Transmission Mount Replacement

An excellent performance-oriented alternative for replacing worn, cracked, or deteriorated original transmission mounting components.

Additional Information

• Manufacturer: Innovative Mounts
• Part Number: 10755
• Product Type: Manual Transmission Mount Kit
• Mount Construction: Steel
• Bushing Material: Polyurethane
• Number of Mounts: 2
• Primary Vehicle Application: 2004–2008 Acura TL
• Chassis Compatibility: UA6 / UA7
• Engine Compatibility: Honda/Acura J-Series V6
• Compatible Engine Codes: J32A3 / J35A8
• Transmission Compatibility: Factory Manual Transmission Only
• Installation Type: Factory Replacement
• Approximate Product Weight: 5–6 lbs, depending on listing and packaging
• Manufacturer Warranty: Lifetime Limited Warranty

Available Polyurethane Bushing Hardness Options:

• 60A – Red: Street-oriented configuration offering the greatest vibration isolation among the available options. Recommended for daily-driven vehicles prioritizing comfort.

• 75A – Black: Street and performance configuration offering increased drivetrain rigidity. Recommended for modified street vehicles and occasional track use.

• 85A – Gray: Track and race-oriented configuration designed to further reduce drivetrain movement under demanding conditions.

• 95A – Red: Extreme race-oriented configuration providing maximum drivetrain rigidity with substantially increased vibration transfer.

Bushing Selection Note: Higher-durometer bushings provide increased resistance to drivetrain movement but generally transmit more noise, vibration, and harshness into the cabin. Choose the appropriate configuration based on vehicle use, engine output, and acceptable vibration levels.

Common Reasons for Replacement

• Worn Factory Transmission Mounts: Aging rubber mounting components can deteriorate, crack, or separate, allowing excessive drivetrain movement.

• Excessive Engine and Transmission Movement: Unwanted drivetrain movement during acceleration and deceleration can negatively affect vehicle response.

• Inconsistent Shifting Feel: Excessive movement of the engine and transmission assembly can affect shifting consistency under load.

• Wheel Hop During Acceleration: Reduced drivetrain movement can help minimize conditions that contribute to wheel hop.

• High-Horsepower J-Series Builds: Increased engine torque places additional stress on factory mounting components.

• Broken or Damaged Mount Bushings: Replace deteriorated factory rubber mounts with durable polyurethane alternatives.

• Improved Drivetrain Response: Reduced mount deflection provides a more direct connection between engine output and vehicle movement.

• Aggressive Street Driving: Firmer mounting helps maintain consistent drivetrain positioning during demanding driving conditions.

• Track and Competition Use: Performance polyurethane bushings offer increased drivetrain control compared with worn factory mounts.

• Long-Term Drivetrain Maintenance: Replace aging original transmission mounts with performance-oriented mounting components.

Installation Notes

1. Verify Vehicle Compatibility: Confirm that the vehicle is a compatible 2004–2008 Acura TL equipped with a factory manual transmission.

2. Confirm Engine Configuration: This kit is designed for compatible J-Series V6 applications, including J32A3 and J35A8 engines.

3. Verify Transmission Type: Innovative Mounts 10755 is intended for manual transmission applications only. It is not compatible with factory automatic transmissions.

4. Support the Engine and Transmission: Properly support the drivetrain before removing the original mounting components to prevent unexpected movement or damage.

5. Remove the Factory Mounting Components: Follow the appropriate Acura service procedures when removing the original mounts being replaced.

6. Inspect Factory Mounting Locations: Check the transmission mounting points, chassis brackets, and surrounding components for damage or excessive wear.

7. Install the Innovative Mounts Assemblies: Position the replacement mounts according to the manufacturer's instructions, ensuring correct orientation and alignment.

8. Inspect Factory Hardware: Examine original mounting bolts and fasteners before reuse. Replace damaged or excessively worn hardware.

9. Align the Drivetrain: Ensure the engine and transmission are properly positioned before final tightening to prevent unnecessary bushing preload.

10. Torque Mounting Hardware: Tighten all fasteners according to the applicable Acura and Innovative Mounts specifications.

11. Verify Component Clearance: Inspect clearance around the transmission, engine, exhaust system, axles, and surrounding chassis components before operating the vehicle.

12. Select the Appropriate Bushing Hardness: Choose the polyurethane durometer that best matches the vehicle's horsepower level, intended use, and acceptable vibration.

13. Expect Increased Engine Vibration: Performance polyurethane mounts generally transmit more vibration into the chassis than factory rubber mounts. Higher-durometer bushings typically increase vibration further.

14. Inspect Remaining Engine Mounts: Check the other factory engine and transmission mounts for deterioration, especially when replacing mounts that have already failed.

15. Inspect After Installation: Recheck mounting hardware, drivetrain alignment, and surrounding component clearances after the initial driving period.

16. Professional Installation Recommended: Installation by an experienced Honda/Acura technician is strongly recommended.

17. Confirm Fitment Before Bolting Down: Innovative Mounts states that mounts showing installation bolt impressions cannot be returned or exchanged. Verify all mounting requirements before installation.

What's Included

• (2) Innovative Mounts Steel Mount Assemblies – Part Number 10755

• Polyurethane Bushings in the Selected Durometer

• Manufacturer-Supplied Mount Components

Important: This product is a two-mount manual transmission replacement kit, not a complete replacement for every engine mount on the vehicle. Additional engine and transmission mounts are sold separately unless specifically included in another mounting package.

Factory mounting hardware may need to be reused. Confirm the exact supplied components and hardware for the selected product configuration before installation.

Upgrade your third-generation Acura TL drivetrain with the Innovative Mounts Steel Manual Transmission Mount Kit (10755), engineered for compatible 2004–2008 Acura TL and 2007–2008 TL Type-S applications equipped with J-Series V6 engines and factory manual transmissions.

Featuring heavy-duty steel construction, Innovative Mounts' no-tear polyurethane bushings, and multiple bushing hardness options, this performance replacement kit provides improved drivetrain stability, reduced engine and transmission movement, and more consistent drivetrain response.

Whether you're replacing worn factory mounts, upgrading your daily-driven six-speed Acura TL, or building a high-performance TL Type-S, Innovative Mounts delivers the strength, durability, and drivetrain control enthusiasts demand.