Images may be for reference only
Product Details
| Part Number: | MMFS-RSX-02 |
| Brand: | Mishimoto |
The Mishimoto Acura RSX aluminum fan shroud kit will considerably improve engine cooling functions and the overall performance of your vehicle. All Mishimoto fan shrouds are significantly lighter than standard fan shrouds. In maintaining the lifetime of your engine, it is ideal to keep your engine running cool, especially during those unbearably hot days.
Aluminum Shroud
(2) 12" Slim Electric Fans
Overall Size: 25.95" x 16.14"
Mounting Hardware:
8 M6X20 screws
2 M6X16 screws
8 M6 nuts
10 M6 plain cushions and elastic cushions
2 M8X16 screws
2 M8 nuts
2 plain cushion and elastic cushions
*Fans come pre-assembled with fans mounted
A Mishimoto fan shroud will notably improve engine cooling performance by delivering more air to the RSX aluminum radiator, while driving out excess heat at the same time. This serves another very important purpose - securing the fan blades, which otherwise could potentially damage other essential components in your engine.
Includes:
Mounting Hardware:
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
| Year | Make | Model | Trim |
|---|---|---|---|
| 2002 | Acura | RSX | Base |
| 2002 | Acura | RSX | Type-S |
| 2003 | Acura | RSX | Base |
| 2003 | Acura | RSX | Type-S |
| 2004 | Acura | RSX | Base |
| 2004 | Acura | RSX | Type-S |
| 2005 | Acura | RSX | Base |
| 2005 | Acura | RSX | Type-S |
| 2006 | Acura | RSX | Base |
| 2006 | Acura | RSX | Type-S |
6 Reviews ★★★★★
0
0
0
3
3
5 Most Recent
Read All 6 Reviews
Read All 6 Reviews
lard_dc5 | July 5th, 2021
Easy install and fast shipping!
Timothy Holt | May 23rd, 2019
Install was a breeze, especially if you're looking to upgrade your radiator as well. The fans are noticably louder than stock, but the cooling power is worth the noise. After running the setup for 6 months, there have been no issues and the car stays nice and cool.
Daniel | July 6th, 2015
Increased air flow, much louder than original. Tight fit but sits fine. No splicing required. Overall satisfied. Installed without removing radiator, but would be easier if I did. Good upgrade over stock.
Shaun McCarthy | June 4th, 2013
Had to do some significant drilling and bending to get the mounts to line up to the stock radiator. Also had to splice the leads to the old connectors because there's no connector available. Fans have a sort of high/loud/annoying sound but move a LOT of air.
Overall worth it, but get ready for a battle if you're installing them on the stock radiator.
Jeff | September 3rd, 2010
the install took only an hour total with fan and shroud assembly...but when i wired it and started it up i have a sound like the fans are pulling too much power at idle.
