Product Details
The BLOX Racing Tuner Series 68mm Throttle Body (BXIM-00212) is a performance-oriented intake system upgrade designed to increase airflow capacity, improve throttle response, and support the performance demands of modified Honda and Acura engines. Featuring a precision-machined 68mm throttle bore, durable cast aluminum construction, and an OEM-inspired design, this throttle body offers an affordable alternative to billet aluminum throttle body assemblies for compatible Honda B-Series, D-Series, F-Series, and H-Series applications.
The throttle body plays an essential role in regulating the amount of air entering an engine. As the driver presses the accelerator pedal, the throttle plate opens to allow additional airflow into the intake manifold. Factory Honda and Acura throttle bodies are engineered to provide predictable throttle response, reliable operation, and sufficient airflow for original engine configurations. However, as engine modifications increase horsepower potential and airflow requirements, the factory throttle body may become a restriction within the intake system.
The BLOX Racing BXIM-00212 addresses this limitation with an enlarged 68mm throttle opening, providing increased airflow capacity compared with smaller factory throttle bodies. This additional airflow potential makes it an attractive upgrade for engines equipped with aftermarket intake manifolds, performance camshafts, ported cylinder heads, higher compression ratios, and forced-induction systems.
Unlike more expensive billet aluminum throttle bodies, the BLOX Racing Tuner Series utilizes a durable cast aluminum housing that closely resembles the appearance and construction of a factory Honda throttle body. This OEM-inspired design provides a clean, understated engine bay appearance while incorporating the larger throttle bore dimensions commonly associated with aftermarket performance components.
The 68mm bore represents a practical middle-ground option for enthusiasts seeking additional airflow capacity without immediately stepping up to larger 70mm or 74mm throttle bodies. Selecting the appropriate throttle body diameter is important because an excessively large throttle opening may provide limited benefits on engines that do not require the additional airflow capacity.
The BXIM-00212 is designed for compatible mechanical cable-operated throttle systems, making it suitable for numerous traditional Honda and Acura performance engine configurations. It is particularly appealing for B-Series and D-Series enthusiasts retaining factory-style throttle cable operation while upgrading their intake system.
An integrated idle adjustment screw provides an adjustment point for idle airflow during installation and tuning. Proper idle adjustment is especially important when installing a larger throttle body on modified engines, where airflow characteristics may differ from the original factory configuration.
Each BLOX Racing Tuner Series throttle body includes a matching throttle body gasket, providing the necessary sealing interface between the throttle body and a compatible intake manifold. Proper gasket alignment and mounting surface preparation are essential for preventing unwanted air leaks and maintaining consistent engine operation.
For optimal performance, the throttle body should be paired with an intake manifold featuring a compatible mounting pattern and appropriately sized inlet opening. Installing a 68mm throttle body against a significantly smaller intake manifold opening may create an airflow restriction that limits the effectiveness of the upgrade. Intake manifold port matching may be beneficial depending on the engine combination.
The BLOX Racing BXIM-00212 can complement a wide range of naturally aspirated and forced-induction Honda performance builds. Whether upgrading a B18C-powered Acura Integra, improving airflow on a turbocharged D16, or building a modified H22-powered Honda Prelude, this throttle body provides the increased airflow capacity and durable construction needed to support performance-oriented engine modifications.
With its precision-machined 68mm bore, factory-inspired aluminum housing, and cable-operated design, the BLOX Racing Tuner Series 68mm Throttle Body (BXIM-00212) offers an excellent combination of airflow potential, affordability, and reliable mechanical operation.
Features
68mm Performance Throttle Bore: Enlarged throttle opening provides increased airflow capacity compared with smaller factory throttle bodies.
Durable Cast Aluminum Construction: Manufactured from cast aluminum for strength, dimensional stability, and long-lasting performance.
BLOX Racing Tuner Series Design: Offers a cost-effective alternative to premium billet aluminum throttle body assemblies.
OEM-Inspired Appearance: Factory-style aluminum housing maintains a clean and understated engine bay appearance.
Cable-Operated Throttle Design: Intended for compatible Honda and Acura engines equipped with traditional mechanical throttle cable systems.
Increased Airflow Potential: Larger throttle bore helps reduce intake restrictions when paired with an appropriately matched intake manifold.
Performance-Oriented Throttle Response: Can provide more responsive airflow characteristics on properly configured and calibrated engines.
Integrated Idle Adjustment Screw: Allows adjustment of idle airflow during installation and engine tuning.
Precision-Machined Throttle Opening: Accurately machined 68mm bore provides consistent throttle plate operation and airflow passage dimensions.
Matching Throttle Body Gasket Included: Supplied with a compatible gasket for proper sealing against the intake manifold.
Honda B-Series Compatibility: Designed for compatible B-Series intake manifold and throttle cable configurations.
Honda D-Series Compatibility: Suitable for compatible D-Series performance builds and aftermarket intake manifold installations.
Honda F-Series Compatibility: Supports compatible F-Series cable-operated intake configurations.
Honda H-Series Compatibility: Can be incorporated into compatible H-Series performance applications.
Naturally Aspirated Performance Applications: Complements upgraded camshafts, ported cylinder heads, high-compression builds, and aftermarket intake manifolds.
Forced-Induction Applications: Supports increased airflow requirements on compatible turbocharged and supercharged engine combinations.
Aftermarket Intake Manifold Compatibility: May be used with compatible aftermarket intake manifolds featuring the appropriate mounting pattern and inlet dimensions.
Street and Motorsport Applications: Suitable for performance-oriented daily drivers, autocross vehicles, drag racing builds, and track applications.
Multiple Bore Sizes Available: Part of the BLOX Racing Tuner Series throttle body lineup, offering several bore diameter options for different performance requirements.
Direct Mechanical Throttle Operation: Retains a traditional throttle cable operating system rather than requiring electronic drive-by-wire controls.
Popular Performance Applications
Honda B-Series Naturally Aspirated Builds
The BLOX Racing 68mm Tuner Series throttle body is an excellent upgrade for modified B-Series engines requiring additional intake airflow capacity.
Popular applications include:
B16A and B16A2 performance builds
B16B Civic Type R applications
B18C1 Integra GS-R performance builds
B18C5 Integra Type R applications
High-compression B-Series engine combinations
Performance camshaft and valvetrain upgrades
Ported cylinder head applications
Aftermarket intake manifold installations
Naturally aspirated high-RPM engine builds
The 68mm bore can complement properly matched intake manifold and cylinder head modifications while maintaining a practical throttle body size for many street-oriented performance applications.
Turbocharged Honda D-Series Builds
Turbocharged D-Series engines can benefit from additional intake airflow capacity as horsepower and boost pressure increase.
Potential applications include:
Turbocharged D16Z6 engines
Turbocharged D16Y8 engines
Built D-Series performance engines
Custom turbo intake manifold configurations
Street-oriented forced-induction builds
Drag racing D-Series applications
The BXIM-00212 can support increased airflow requirements when combined with appropriate intake manifold sizing, fuel system upgrades, and engine management calibration.
Acura Integra GS-R and Type R Builds
The Acura Integra remains a popular platform for naturally aspirated and turbocharged Honda B-Series performance.
Potential applications include:
B18C1 GS-R intake system upgrades
B18C5 Type R performance builds
Skunk2 and other compatible aftermarket intake manifolds
Ported factory intake manifolds
Performance cylinder head upgrades
High-RPM naturally aspirated engine combinations
Turbocharged B-Series applications
Honda Prelude H-Series Performance Builds
The BLOX Racing BXIM-00212 may be incorporated into compatible H-Series engine combinations requiring increased airflow.
Potential applications include:
H22A1 performance builds
H22A4 performance builds
H23A1 modified engines
Aftermarket intake manifold installations
Performance camshaft upgrades
Naturally aspirated high-compression builds
Turbocharged H-Series engines
Honda B-Series Engine Swap Applications
The BXIM-00212 may also be suitable for custom Honda and Acura engine swaps retaining compatible cable-operated throttle systems.
Popular projects include:
B16-swapped Honda Civic
B18C-swapped Honda Civic
B-Series-swapped Honda CRX
B-Series-swapped Honda Del Sol
B20/VTEC engine combinations
LS/VTEC performance builds
Custom Honda and Acura performance projects
Performance Note: Installing a larger throttle body does not automatically increase horsepower. Actual performance improvements depend on engine airflow requirements, intake manifold port matching, supporting modifications, and ECU calibration.
Additional Information
- Manufacturer: BLOX Racing
- Manufacturer Part Number: BXIM-00212
- Product Series: Tuner Series
- Product Type: Performance Throttle Body
- Throttle Bore Diameter: 68mm
- Material: Cast Aluminum
- Construction: Die-Cast Aluminum Housing with Machined Throttle Bore
- Throttle Operation: Mechanical Cable-Operated
- Idle Adjustment: Integrated Idle Adjustment Screw
- Throttle Position Sensor: Sold Separately
- Throttle Body Gasket: Included
- Engine Compatibility: Compatible Honda B-Series, D-Series, F-Series, and H-Series Configurations
- Mounting Configuration: Factory-Style Cable Throttle Body Applications
- Fitment Type: Engine-Specific / Intake Manifold-Specific
- Primary Function: Regulates Engine Intake Airflow and Supports Increased Airflow Capacity
- Recommended Applications: Naturally Aspirated Performance Builds, Turbocharged Engines, Supercharged Engines, Intake Manifold Upgrades, and Engine Swaps
BLOX Racing Tuner Series Bore Size Options:
66mm – BXIM-00211
68mm – BXIM-00212
70mm – BXIM-00213
74mm – BXIM-00214
Important: Intake manifold port matching may be required to maximize airflow benefits. Throttle position sensor compatibility, idle control provisions, and throttle cable operation must be verified before installation.
Common Reasons for Replacement
Restricted Factory Throttle Body: Smaller factory throttle bodies may become restrictive on modified engines requiring increased intake airflow.
Performance Intake Manifold Installation: Larger aftermarket intake manifolds may benefit from a throttle body with a matching inlet diameter.
Naturally Aspirated Engine Upgrades: Performance camshafts, ported cylinder heads, and higher-compression engine combinations can increase airflow requirements.
Turbocharger Installation: Forced-induction engines may require additional throttle body airflow capacity as horsepower and boost levels increase.
Supercharger Installation: A larger throttle body may complement compatible supercharged engine combinations.
Worn Factory Throttle Body Components: Aging throttle shafts, sticking throttle plates, or damaged throttle body housings may require replacement.
Throttle Response Improvements: A properly sized throttle body can change throttle response characteristics on modified engines.
B-Series Engine Swaps: Engine conversions may require an aftermarket throttle body compatible with the selected intake manifold.
Intake System Restoration: Replacing a damaged factory throttle body can help restore proper mechanical throttle operation.
Custom Performance Builds: Enthusiasts may select a 68mm throttle body to support future engine modifications and increased airflow requirements.
Engine Bay Appearance: The cast aluminum construction provides a clean, OEM-inspired appearance for performance engine compartments.
Diagnostic Note: A larger throttle body will not correct vacuum leaks, malfunctioning idle air control valves, faulty throttle position sensors, damaged throttle cables, or unrelated engine management problems.
Installation Notes
Verify Engine Compatibility: Confirm that the BXIM-00212 mounting pattern and throttle configuration are compatible with the intended engine and intake manifold.
Inspect the Intake Manifold Opening: Measure the intake manifold inlet to determine whether port matching is required for the 68mm throttle bore.
Disconnect the Battery: Disconnect the negative battery terminal before beginning installation.
Remove the Intake Piping: Carefully disconnect the air intake tube, vacuum hoses, and related components attached to the factory throttle body.
Disconnect the Throttle Cable: Remove the throttle cable from the original throttle linkage without damaging the cable or adjustment components.
Disconnect Electrical Sensors: Unplug the throttle position sensor and any other electrical connections attached to the factory throttle body.
Disconnect Coolant Hoses if Applicable: Some factory throttle bodies utilize coolant passages. Follow the appropriate service procedures when removing coolant hoses.
Remove the Factory Throttle Body: Loosen the mounting fasteners and carefully separate the original throttle body from the intake manifold.
Clean the Mounting Surface: Remove old gasket material and thoroughly clean the intake manifold mounting flange.
Inspect the BLOX Racing Throttle Body: Check the throttle plate, shaft, linkage, and machined surfaces for damage before installation.
Install a Compatible Throttle Position Sensor: Install and calibrate a compatible TPS according to the applicable manufacturer instructions. The TPS is sold separately.
Install the Matching Gasket: Position the included throttle body gasket between the BLOX Racing throttle body and intake manifold.
Mount the Throttle Body: Secure the BXIM-00212 to the intake manifold using appropriate mounting hardware and manufacturer-specified torque procedures.
Reconnect the Throttle Cable: Attach the throttle cable and adjust free play according to the factory service manual. Verify that the throttle plate opens fully and returns freely to the closed position.
Reconnect Sensors and Hoses: Reinstall compatible electrical connections, vacuum lines, and coolant hoses as required by the application.
Verify Throttle Operation: With the engine off, manually operate the throttle linkage and confirm that the throttle plate moves smoothly without sticking or binding.
Adjust Idle Settings: Use the integrated idle adjustment screw as appropriate and follow the vehicle's idle adjustment procedure.
Calibrate the TPS: Verify throttle position sensor output and adjust it according to the applicable engine management or factory service specifications.
Inspect for Vacuum Leaks: Start the engine and check the throttle body mounting flange and associated vacuum connections for leaks.
Verify Engine Calibration: Vehicles with significant intake modifications may require ECU calibration to optimize throttle response, idle operation, and engine performance.
Perform a Final Inspection: Confirm proper throttle return, stable idle, secure mounting hardware, and normal engine operation before driving.
Professional installation and tuning are recommended, particularly for modified engines, aftermarket intake manifolds, and forced-induction applications.
What's Included
(1) BLOX Racing Tuner Series 68mm Cast Aluminum Throttle Body
(1) Matching 68mm Throttle Body Gasket
Quantity: One throttle body assembly with matching gasket.
Throttle Position Sensor: Not included; sold separately.
Additional Components: Intake manifold, throttle cable, aftermarket intake piping, and other installation accessories are not included unless specifically stated.
The BLOX Racing Tuner Series 68mm Throttle Body (BXIM-00212) is a performance-oriented intake upgrade designed for compatible Honda B-Series, D-Series, F-Series, and H-Series engines. Featuring a precision-machined 68mm throttle bore, durable die-cast aluminum construction, OEM-inspired styling, and an integrated idle adjustment screw, this throttle body provides increased airflow potential while maintaining a factory-style appearance.
With its cable-operated design, included matching gasket, and compatibility with a variety of Honda and Acura performance engine configurations, the BXIM-00212 is an excellent addition to naturally aspirated builds, forced-induction projects, intake manifold upgrades, and engine swaps.
Whether building a high-compression B18C1, upgrading a turbocharged D16, or improving airflow on a modified H22, BLOX Racing delivers the airflow capacity, durable construction, and performance-focused design needed to support your next Honda or Acura engine build.
| Part Number: | BXIM-00212 |
| Brand: | Blox |
| Size: | 68mm |
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
| Year | Make | Model | Trim |
|---|---|---|---|
| 1988 | Honda | CRX | DX |
| 1988 | Honda | CRX | Si |
| 1988 | Honda | Civic | DX |
| 1988 | Honda | Civic | LX |
| 1988 | Honda | Civic | RT 4WD |
| 1989 | Honda | CRX | Base |
| 1989 | Honda | CRX | Si |
| 1989 | Honda | Civic | DX |
| 1989 | Honda | Civic | LX |
| 1989 | Honda | Civic | RT 4WD |
| 1989 | Honda | Civic | Si |
| 1990 | Acura | Integra | GS |
| 1990 | Acura | Integra | LS |
| 1990 | Acura | Integra | RS |
| 1990 | Honda | CRX | Base |
| 1990 | Honda | CRX | HF |
| 1990 | Honda | CRX | Si |
| 1990 | Honda | Civic | DX |
| 1990 | Honda | Civic | EX |
| 1990 | Honda | Civic | LX |
| 1990 | Honda | Civic | RT 4WD |
| 1990 | Honda | Civic | Si |
| 1991 | Acura | Integra | GS |
| 1991 | Acura | Integra | LS |
| 1991 | Acura | Integra | RS |
| 1991 | Honda | CRX | Base |
| 1991 | Honda | CRX | HF |
| 1991 | Honda | CRX | Si |
| 1991 | Honda | Civic | DX |
| 1991 | Honda | Civic | EX |
| 1991 | Honda | Civic | LX |
| 1991 | Honda | Civic | RT 4WD |
| 1991 | Honda | Civic | Si |
| 1992 | Acura | Integra | GS |
| 1992 | Acura | Integra | LS |
| 1992 | Acura | Integra | RS |
| 1992 | Honda | Civic | CX |
| 1992 | Honda | Civic | DX |
| 1992 | Honda | Civic | EX |
| 1992 | Honda | Civic | LX |
| 1992 | Honda | Civic | Si |
| 1992 | Honda | Civic | VX |
| 1992 | Honda | Prelude | Si |
| 1992 | Honda | Prelude | Si 4WS |
| 1993 | Acura | Integra | GS |
| 1993 | Acura | Integra | LS |
| 1993 | Acura | Integra | RS |
| 1993 | Honda | Civic del Sol | S |
| 1993 | Honda | Civic del Sol | Si |
| 1993 | Honda | Civic | CX |
| 1993 | Honda | Civic | DX |
| 1993 | Honda | Civic | EX |
| 1993 | Honda | Civic | LX |
| 1993 | Honda | Civic | Si |
| 1993 | Honda | Civic | VX |
| 1993 | Honda | Prelude | Si |
| 1993 | Honda | Prelude | VTEC |
| 1994 | Acura | Integra | GS-R |
| 1994 | Acura | Integra | LS |
| 1994 | Acura | Integra | RS |
| 1994 | Honda | Civic del Sol | S |
| 1994 | Honda | Civic del Sol | Si |
| 1994 | Honda | Civic del Sol | VTEC |
| 1994 | Honda | Civic | CX |
| 1994 | Honda | Civic | DX |
| 1994 | Honda | Civic | EX |
| 1994 | Honda | Civic | LX |
| 1994 | Honda | Civic | Si |
| 1994 | Honda | Civic | VX |
| 1994 | Honda | Prelude | Si |
| 1994 | Honda | Prelude | VTEC |
| 1995 | Acura | Integra | GS-R |
| 1995 | Acura | Integra | LS |
| 1995 | Acura | Integra | RS |
| 1995 | Acura | Integra | Special Edition |
| 1995 | Honda | Civic del Sol | S |
| 1995 | Honda | Civic del Sol | Si |
| 1995 | Honda | Civic del Sol | VTEC |
| 1995 | Honda | Civic | CX |
| 1995 | Honda | Civic | DX |
| 1995 | Honda | Civic | EX |
| 1995 | Honda | Civic | LX |
| 1995 | Honda | Civic | Si |
| 1995 | Honda | Civic | VX |
| 1995 | Honda | Prelude | SE |
| 1995 | Honda | Prelude | Si |
| 1995 | Honda | Prelude | VTEC |
| 1996 | Acura | Integra | GS-R |
| 1996 | Acura | Integra | LS |
| 1996 | Acura | Integra | RS |
| 1996 | Acura | Integra | Special Edition |
| 1996 | Honda | Civic del Sol | S |
| 1996 | Honda | Civic del Sol | Si |
| 1996 | Honda | Civic del Sol | VTEC |
| 1996 | Honda | Civic | CX |
| 1996 | Honda | Civic | DX |
| 1996 | Honda | Civic | EX |
| 1996 | Honda | Civic | HX |
| 1996 | Honda | Civic | LX |
| 1996 | Honda | Prelude | Si |
| 1996 | Honda | Prelude | VTEC |
| 1997 | Acura | Integra | GS |
| 1997 | Acura | Integra | GS-R |
| 1997 | Acura | Integra | LS |
| 1997 | Acura | Integra | RS |
| 1997 | Acura | Integra | Type R |
| 1997 | Honda | CR-V | LX |
| 1997 | Honda | Civic del Sol | S |
| 1997 | Honda | Civic del Sol | Si |
| 1997 | Honda | Civic del Sol | VTEC |
| 1997 | Honda | Civic | CX |
| 1997 | Honda | Civic | DX |
| 1997 | Honda | Civic | EX |
| 1997 | Honda | Civic | HX |
| 1997 | Honda | Civic | LX |
| 1997 | Honda | Prelude | Base |
| 1997 | Honda | Prelude | Type SH |
| 1998 | Acura | Integra | GS |
| 1998 | Acura | Integra | GS-R |
| 1998 | Acura | Integra | LS |
| 1998 | Acura | Integra | RS |
| 1998 | Acura | Integra | Type R |
| 1998 | Honda | CR-V | EX |
| 1998 | Honda | CR-V | LX |
| 1998 | Honda | Civic | CX |
| 1998 | Honda | Civic | DX |
| 1998 | Honda | Civic | EX |
| 1998 | Honda | Civic | GX |
| 1998 | Honda | Civic | HX |
| 1998 | Honda | Civic | LX |
| 1998 | Honda | Prelude | Base |
| 1998 | Honda | Prelude | Type SH |
| 1999 | Acura | Integra | GS |
| 1999 | Acura | Integra | GS-R |
| 1999 | Acura | Integra | LS |
| 1999 | Honda | CR-V | EX |
| 1999 | Honda | CR-V | LX |
| 1999 | Honda | Civic | CX |
| 1999 | Honda | Civic | DX |
| 1999 | Honda | Civic | EX |
| 1999 | Honda | Civic | GX |
| 1999 | Honda | Civic | HX |
| 1999 | Honda | Civic | LX |
| 1999 | Honda | Civic | Si |
| 1999 | Honda | Civic | Value Package |
| 1999 | Honda | Prelude | Base |
| 1999 | Honda | Prelude | Type SH |
| 2000 | Acura | Integra | GS |
| 2000 | Acura | Integra | GS-R |
| 2000 | Acura | Integra | LS |
| 2000 | Acura | Integra | Type R |
| 2000 | Honda | CR-V | EX |
| 2000 | Honda | CR-V | LX |
| 2000 | Honda | CR-V | SE |
| 2000 | Honda | Civic | CX |
| 2000 | Honda | Civic | DX |
| 2000 | Honda | Civic | EX |
| 2000 | Honda | Civic | GX |
| 2000 | Honda | Civic | HX |
| 2000 | Honda | Civic | LX |
| 2000 | Honda | Civic | Si |
| 2000 | Honda | Prelude | Base |
| 2000 | Honda | Prelude | Type SH |
| 2001 | Acura | Integra | GS |
| 2001 | Acura | Integra | GS-R |
| 2001 | Acura | Integra | LS |
| 2001 | Acura | Integra | Type R |
| 2001 | Honda | CR-V | EX |
| 2001 | Honda | CR-V | LX |
| 2001 | Honda | CR-V | SE |
| 2001 | Honda | Prelude | Base |
| 2001 | Honda | Prelude | Type SH |
Engine Fitment
| Engine |
|---|
| Honda 1.8L/1834CC - 4 Cylinder (B18A1) |
| Honda 1.8L/1797CC - 4 Cylinder (B18C1) |
| Honda 1.8L/1834CC - 4 Cylinder (B18B1) |
| Honda 1.8L/1797CC - 4 Cylinder (B18C5) |
| Honda 1.5L/1493CC - 4 Cylinder (D15B2) |
| Honda 1.6L/1588CC - 4 Cylinder (D16A6) |
| Honda 1.5L/1493CC - 4 Cylinder (D15B8) |
| Honda 1.5L/1493CC - 4 Cylinder (D15B7) |
| Honda 1.6L/1588CC - 4 Cylinder (D16Z6) |
| Honda 1.5L/1493CC - 4 Cylinder (D15Z1) |
| Honda 1.6L/1588CC - 4 Cylinder (D16Y7) |
| Honda 1.6L/1588CC - 4 Cylinder (D16Y8) |
| Honda 1.6L/1590CC - 4 Cylinder (D16Y5) |
| Honda 1.6L/1588CC - 4 Cylinder (D16B5) |
| Honda 1.6L/1595CC - 4 Cylinder (B16A2) |
| Honda 1.6L/1588CC - 4 Cylinder (B16A3) |
| Honda 2.0L/1972CC - 4 Cylinder (B20B4) |
| Honda 2.0L/1972CC - 4 Cylinder (B20Z2) |
| Honda 1.5L/1493CC - 4 Cylinder (D15B6) |
| Honda 2.3L/2259CC - 4 Cylinder (H23A1) |
| Honda 2.2L/2156CC - 4 Cylinder (H22A1) |
| Honda 2.2L/2156CC - 4 Cylinder (H22A4) |
Reviews
No Reviews Yet!
Write a Review