Skunk2 K-Series Silver Pro Series Intake Manifold Reviews

Install was simple and made good power. Compared to the Civic Si's RBC, it makes a couple more HP more when you look at dyno sheets online so this is a good alternative unless you want to spend more and get Skunk2's Ultra race manifold or an RRC. The only complaint I have is that it only has 4 holes to bolt up to the throttle body and is missing the 5th hole that gives the map sensor air for an 05/06 rsx. The map sensor is moved onto the throttle body instead of the manifold for 05/06 rsx's and so when you install this manifold you need to drill an additional hole into the manifold like where it is for the stock PRB manifold for the map sensor to get an air reading or you will have to reroute the map sensor to get air from the top of the manifold where there is a plug you can take off and run a tube to the map sensor.

Good quality product. There were two issues. 1. No pcv nipple on the manifold, I used an oil catch can and routed it to the short ram intake 2. The manifold gasket it comes with needs to be trimmed around where the injectors are. It blocks part of it

Excellent products!!! Excellent service.!!! I called talked to a representative. All my questions were answered and ordered the skunk2 manifold. It arrived within 24 hours, and installed it that day. Absolute best choice for aftermarket and oem parts.

Really good product. Fast shipping. Is worth the money, it will make a huge difference in urban car with a good tune.

I have had this manifold installed for 18k miles now as I wanted to give it a real test and review. Had stock PRB for 70k, and RBC for 24k. Hands down this is the best manifold available for the k's. In all fairness the RBC did outperform on the dyno with only Injen CAI and stock tune. However with K-Pro the Skunk2 blew it away! Match it with 70mm Hybrid Throttle Body, KiddRacing Header, 3" exhaust, Stage 2 cams, 8lb Fly, Stage 3 clutch, short shifter, RDX injectors, Walbro pump, and you got yourself a NA bike killer (600's). If your wondering if this manifold is worth the extra $2-300... YES.

Just installed this In my 06 RSX and I am loving it!! I can feel the extra power and torque right from the start! Looks great under the hood and makes a real clean look. You can tell from the first look that this manifold was made well and Skunk2 paid close attention to detail. I used copper spray with the manifold seal and it sealed great with no leaks at all. Highly recommend this for great looks and more importantly, POWER!!!