Log In Cart
Log In

Create An Account

Log In Cart
Your Cart Is Empty

Wiseco S710 22mm Heavy Duty 5115 Steel Wrist Pin
Part Number: S710

Images may be for reference only

Wiseco S710 22mm Heavy Duty 5115 Steel Wrist Pin
Part Number: S710

Be the first to review!
$16.99

Earn 33 Builders Club Points. Learn More

No Vehicle Specific Fitment

Not legal for sale or use in California on any pollution controlled motor vehicles.
Ask a Question

Product Details

The Wiseco S710 Severe Duty Wrist Pin is a high-strength piston pin engineered for demanding high-performance engine applications where increased durability and resistance to bending are essential.

Manufactured from 5115 steel, the S710 features a thick-wall design intended to withstand the elevated combustion pressures and mechanical loads associated with turbocharged, supercharged, high-compression, and competition engines.

The wrist pin serves as the critical connection between the piston and connecting rod, transferring combustion forces while allowing the piston to articulate throughout the engine's operating cycle. In high-output engines, these components experience substantial loading, making wrist pin strength an important consideration when selecting forged pistons and connecting rods.

The Wiseco S710 features a 22mm nominal outside diameter, 2.500-inch overall length, and approximately 0.197-inch wall thickness. Its reinforced construction provides additional material compared with thinner-wall wrist pins of the same outside diameter.

Designed as a Severe Duty upgrade for compatible Wiseco forged piston applications, the S710 is an excellent option for engine builders seeking increased wrist pin strength without changing the piston pin bore diameter.

Whether assembling a high-boost Honda K-Series engine, upgrading an existing forged piston combination, or preparing a dedicated competition engine, the Wiseco S710 Severe Duty Wrist Pin provides heavy-duty construction for demanding performance applications.

Features

  • Severe Duty Construction: Designed for high-performance engines experiencing elevated combustion and mechanical loads.

  • 5115 Steel Material: High-strength steel construction for demanding piston and connecting rod applications.

  • 22mm Nominal Outside Diameter: Designed for compatible 22mm piston pin bores and connecting rod small ends.

  • 2.500-Inch Overall Length: Precision-sized for compatible Wiseco forged piston applications.

  • 0.197-Inch Wall Thickness: Thick-wall construction provides increased material compared with lighter-duty wrist pins.

  • Heavy-Duty Piston Pin Design: Intended to improve resistance to bending and deformation under high loads.

  • Forced-Induction Applications: Suitable for compatible turbocharged and supercharged engine combinations.

  • High-Compression Applications: Appropriate for compatible naturally aspirated performance engines.

  • Forged Piston Compatibility: Designed for select Wiseco forged piston configurations.

  • Precision-Machined Construction: Manufactured for accurate fitment in compatible piston and connecting rod assemblies.

  • Performance Engine Building: Ideal for custom engine builds requiring upgraded wrist pin strength.

  • Competition Applications: Suitable for properly engineered drag racing, road racing, and other motorsport engines.

  • Direct Replacement Potential: Can replace certain standard-duty Wiseco wrist pins when dimensions and application compatibility are confirmed.

  • Sold Individually: Order the appropriate quantity for the number of pistons being assembled.

Vehicle Fitment

The Wiseco S710 is a universal performance wrist pin designed for specific piston and connecting rod combinations rather than a direct-fit replacement based solely on vehicle make, model, or year.

Compatibility must be confirmed using the piston manufacturer's specifications.

Honda and Acura Performance Applications

Potential applications include compatible forged piston combinations used in:

  • Honda K20 Performance Engines

  • Honda K24 Performance Engines

  • Honda K20/K24 Hybrid Engine Builds

  • Honda Civic K-Series Engine Swaps

  • Acura RSX Type-S Performance Builds

  • Honda Accord K-Series Performance Applications

  • Turbocharged Honda and Acura Engine Builds

Confirmed Piston Series Reference

Wiseco K544M Series

The S710 is used as a Severe Duty wrist pin upgrade for compatible Wiseco K544M-series forged piston applications, including K544M88, subject to verification of the exact piston configuration and pin dimensions.

Important Fitment Note: Matching the 22mm wrist pin diameter alone does not guarantee compatibility. Overall pin length, connecting rod small-end dimensions, piston pin boss spacing, and retaining clip configuration must also be verified.

Popular Performance Applications

  • Honda K20 Turbo Engine Builds

  • Honda K24 Turbo Engine Builds

  • K20/K24 Hybrid Engine Builds

  • High-Boost Forced-Induction Engines

  • Supercharged Performance Applications

  • Forged Piston Engine Assemblies

  • High-Compression Naturally Aspirated Engines

  • Drag Racing Engine Builds

  • Roll Racing Applications

  • Time Attack and Road Racing Engines

  • Competition Engine Rebuilds

  • Severe Duty Wrist Pin Upgrades

Additional Information

Manufacturer: Wiseco

Manufacturer Part Number: S710

Product Type: Severe Duty Wrist Pin

Component: Piston Pin / Gudgeon Pin

Material: 5115 Steel

Nominal Outside Diameter: 22mm / Approximately 0.866 Inches

Overall Length: 2.500 Inches / 63.50mm

Wall Thickness: Approximately 0.197 Inches / 5.00mm

Construction: Heavy-Duty Thick-Wall Steel

Application: Compatible Wiseco Forged Pistons

Compatible Piston Series Reference: Select K544M Series Applications

Compatible Piston Kit Reference: K544M88, subject to dimensional confirmation

Quantity: One Wrist Pin

Wrist Pin Retaining Clips: Not Included

Pistons: Not Included

Connecting Rods: Not Included

Vehicle Application: Universal / Application-Specific Performance Engine Components

Severe Duty Wrist Pin Construction

The Wiseco S710 is designed to provide increased strength for high-performance engine applications.

As engine output increases, combustion pressure places additional loading on the piston, wrist pin, and connecting rod assembly.

The wrist pin must transfer these loads while maintaining its dimensional integrity and allowing proper movement between the piston and connecting rod.

The S710's thick-wall construction provides additional material to help resist deformation under demanding operating conditions.

Advantages include:

  • Increased structural rigidity

  • Improved resistance to bending

  • Heavy-duty steel construction

  • Support for high-cylinder-pressure applications

  • Compatibility with properly engineered performance engine assemblies

The S710 is especially relevant when an engine build places greater emphasis on strength than minimizing reciprocating assembly weight.

5115 Steel Material

The Wiseco S710 is manufactured from 5115 steel, a material used in demanding automotive component applications.

Its heavy-duty construction is intended to withstand substantial mechanical loading while maintaining the precise dimensions required for proper piston and connecting rod operation.

Benefits include:

  • High-strength steel construction

  • Resistance to demanding mechanical loads

  • Dimensional stability in properly configured applications

  • Suitability for high-performance engine assemblies

  • Durable construction for motorsport applications

Correct pin-to-piston and pin-to-connecting-rod clearances remain essential regardless of material strength.

Thick-Wall 0.197-Inch Design

The S710 features an approximately 0.197-inch wall thickness.

Compared with a thinner-wall wrist pin of identical outside diameter and length, the thicker-wall construction provides additional material to resist bending.

This can be particularly beneficial in engines experiencing elevated cylinder pressures.

Common applications include:

  • High-boost turbocharged engines

  • High-output supercharged engines

  • High-compression competition engines

  • Drag racing applications

  • Aggressive performance engine combinations

Important: A thicker wrist pin may weigh more than a lighter-duty alternative. The complete rotating and reciprocating assembly should be balanced according to the engine builder's specifications.

Wiseco S710 vs. S625 Wrist Pins

The Wiseco S710 is a Severe Duty alternative to the standard S625 wrist pin in compatible applications.

SpecificationWiseco S625Wiseco S710
Nominal Diameter22mm22mm
Overall Length2.500 Inches2.500 Inches
Approximate Wall Thickness0.157 Inches0.197 Inches
ConstructionStandard-DutySevere Duty
Primary BenefitLower WeightIncreased Strength

The S710's thicker wall provides a more robust wrist pin for demanding applications where additional strength is preferred.

Compatibility Note: Confirm that the original piston pin dimensions match the S710 before substituting it for another wrist pin.

Common Reasons for Replacement

  • High-Boost Engine Build: Upgrade wrist pin strength for elevated cylinder pressures.

  • Turbocharger Upgrade: Add heavy-duty wrist pins when increasing engine output.

  • Forged Piston Installation: Select upgraded pins for a new performance engine assembly.

  • Competition Engine Preparation: Improve wrist pin strength for demanding motorsport use.

  • Bent or Damaged Wrist Pin: Replace a damaged component after identifying the underlying cause.

  • Engine Rebuild: Install new wrist pins during a complete engine refresh.

  • Increased Cylinder Pressure: Choose a stronger pin for a high-output engine combination.

  • Connecting Rod Upgrade: Select appropriately matched pins when installing aftermarket rods.

  • Severe Duty Piston Upgrade: Replace compatible standard-duty pins with thicker-wall alternatives.

Installation Notes

  1. Verify Piston Compatibility: Confirm the S710 is approved for the specific piston part number.

  2. Check Wrist Pin Diameter: Verify the piston and connecting rod require a 22mm nominal pin.

  3. Confirm Overall Length: Ensure the 2.500-inch pin length matches the piston assembly.

  4. Inspect the Piston Pin Bores: Check for wear, distortion, scoring, or other damage.

  5. Inspect the Connecting Rod Small End: Confirm proper fitment and bearing or bushing condition.

  6. Measure Clearances: Verify pin-to-piston and pin-to-rod clearances according to the applicable specifications.

  7. Check Pin Boss Spacing: Confirm the wrist pin fits correctly within the piston.

  8. Inspect Retaining Clip Grooves: Ensure the piston retaining clip grooves are undamaged.

  9. Use Compatible Retaining Clips: Install the correct wrist pin locks for the piston design.

  10. Lubricate During Assembly: Apply the engine builder's recommended assembly lubricant.

  11. Install Carefully: Avoid damaging the piston pin bores or connecting rod small end.

  12. Verify Free Movement: Confirm the wrist pin articulates properly without binding.

  13. Confirm Retaining Clip Engagement: Ensure both retaining clips are fully seated.

  14. Check Reciprocating Weight: Account for any weight differences when balancing the engine assembly.

  15. Follow Engine Builder Specifications: Complete all measurements and installation procedures before final assembly.

Installation Recommendation: Professional engine assembly is recommended. Incorrect wrist pin clearance or retaining clip installation can cause severe engine damage.

What's Included

  • (1) Wiseco S710 Severe Duty Wrist Pin

  • 22mm Nominal Outside Diameter

  • 2.500-Inch Overall Length

  • Heavy-Duty 5115 Steel Construction

Not Included:

  • Pistons

  • Connecting Rods

  • Wrist Pin Retaining Clips

  • Piston Rings

  • Engine Bearings

  • Additional Wrist Pins

Quantity Note: Four wrist pins are typically required for a four-cylinder engine. Confirm the quantity needed for your specific engine assembly.

Upgrade your forged piston assembly with the Wiseco S710 Severe Duty Wrist Pin for increased strength, thick-wall construction, and dependable performance in demanding engine applications.

Featuring a 22mm nominal diameter, 2.500-inch overall length, approximately 0.197-inch wall thickness, and durable 5115 steel construction, the Wiseco S710 is designed for engine builders who require additional wrist pin strength.

Whether assembling a high-boost Honda K-Series engine, upgrading compatible Wiseco forged pistons, or preparing a dedicated competition engine, the Wiseco S710 Severe Duty Wrist Pin provides the heavy-duty construction needed for serious performance applications.

Part Number: S710
Brand: Wiseco
Size: 22mm
CARB Approved: No


Not legal for sale or use in California on any pollution controlled motor vehicles. See http://www.semasan.com/emissions for state by state emissions requirements.
There is a 5% cancellation fee if you order this product and want to ship it to the state of California.

WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.

Vehicle Fitment

This part does not have vehicle specific fitment. Please contact us if you need assistance.

Reviews

No Reviews Yet!

Write a Review