Images may be for reference only
Product Details
The Turbosmart Kompact Shortie/VAG Base O-Ring Kit (TS-0203-3012) is a genuine Turbosmart replacement sealing kit designed for compatible compressor-cover-style Kompact Shortie and VAG blow-off valves. Featuring multiple high-quality replacement O-rings, this kit helps restore proper sealing between the blow-off valve assembly and its mounting interface.
Maintaining an airtight seal is essential for reliable turbocharger performance. Over time, O-rings can become compressed, damaged, or deteriorated from repeated heat cycles, pressure changes, and normal service. Worn seals may allow pressurized intake air to escape, potentially contributing to boost leaks and inconsistent turbocharger performance.
The TS-0203-3012 provides the replacement base seals needed to service compatible Turbosmart Kompact blow-off valves without purchasing an entirely new valve assembly.
Designed specifically for the Kompact Shortie/VAG compressor-cover-style blow-off valve range, these O-rings provide the correct sealing configuration for supported Turbosmart applications.
Whether performing routine turbocharger maintenance, reinstalling a Kompact blow-off valve, or diagnosing a boost leak, the Turbosmart TS-0203-3012 Base O-Ring Kit offers a convenient and cost-effective solution for restoring proper sealing performance.
Features
Genuine Turbosmart Replacement Kit: Manufactured for compatible Turbosmart Kompact blow-off valves.
Base O-Ring Replacement Kit: Restores sealing at the blow-off valve mounting interface.
Kompact Shortie Compatibility: Designed for supported compressor-cover-style Kompact Shortie valves.
VAG Blow-Off Valve Compatibility: Suitable for compatible Turbosmart VAG applications.
Multiple Replacement O-Rings: Includes an assortment of seals required for supported configurations.
Precision-Fit Design: Intended to match the corresponding Turbosmart valve sealing surfaces.
Boost Leak Prevention: Helps prevent pressurized intake air from escaping through damaged base seals.
Durable Sealing Construction: Designed for automotive turbocharger applications.
Direct Replacement Components: Allows servicing of existing compatible blow-off valves.
Convenient Maintenance Solution: Replaces worn seals without requiring a complete valve replacement.
Turbocharger Performance Support: Helps maintain proper charge-air system sealing.
Universal Vehicle Application: Compatibility is determined by the installed Turbosmart blow-off valve.
Turbosmart Part Number TS-0203-3012: Ensures accurate identification and ordering.
Popular Performance Applications
The Turbosmart TS-0203-3012 is intended for vehicles equipped with compatible Turbosmart compressor-cover-style Kompact Shortie/VAG blow-off valves.
Popular applications include:
Volkswagen GTI Turbo Applications: Compatible aftermarket Turbosmart Kompact VAG installations.
Volkswagen Golf R Turbo Applications: Supported Kompact blow-off valve configurations.
Volkswagen Jetta Turbo Applications: Compatible Turbosmart VAG valve assemblies.
Volkswagen Passat Turbo Applications: Supported aftermarket Kompact installations.
Audi A3 Turbo Applications: Compatible VAG-style Turbosmart blow-off valves.
Audi S3 Turbo Applications: Supported Kompact valve installations.
Audi A4 Turbo Applications: Compatible compressor-cover-style blow-off valves.
Audi TT and TTS Turbo Applications: Supported Turbosmart VAG configurations.
Ford EcoBoost Turbo Applications: Compatible compressor-cover-style Kompact Shortie installations.
Custom Turbocharger Systems: Applications using supported Turbosmart Kompact Shortie valves.
Street Performance Vehicles: Routine blow-off valve maintenance and sealing repairs.
Motorsport Applications: Servicing compatible Turbosmart blow-off valve assemblies.
Important: This kit is not a universal replacement for every Volkswagen, Audi, Ford EcoBoost, or Turbosmart blow-off valve.
Compatibility must be confirmed using the specific Turbosmart valve model and part number.
The TS-0203-3012 is intended for compressor-cover-style Kompact Shortie/VAG valves, not the standard Kompact Dual Port and Plumb Back valve range.
Additional Information
- Manufacturer: Turbosmart
- Part Number: TS-0203-3012
- Product Name: Kompact Blow-Off Valve VAG/Shortie Base O-Ring Kit
- Product Type: Blow-Off Valve Replacement Sealing Kit
- Compatible Series: Turbosmart Kompact Shortie / VAG
- Primary Application: Compressor-Cover-Style Blow-Off Valve Base Sealing
- Kit Contents: Assorted Replacement O-Rings
- Installation Location: Blow-Off Valve Base / Mounting Interface
- Vehicle Fitment: Universal, Based on Turbosmart Valve Compatibility
- UPC: 9329677013801
Genuine Turbosmart Replacement Seals
The TS-0203-3012 contains replacement O-rings designed specifically for compatible Turbosmart Kompact Shortie/VAG blow-off valves.
Using the correct seals helps maintain the intended fit between the valve and its mounting surface.
Incorrectly sized or damaged O-rings may prevent the valve from sealing properly, potentially allowing boost pressure to escape.
Kompact Shortie Blow-Off Valve Compatibility
Turbosmart's Kompact Shortie range includes compact blow-off valve designs that mount directly to supported turbocharger compressor housings or corresponding factory-style mounting locations.
These installations rely on properly fitted sealing components to prevent charge-air leakage.
The TS-0203-3012 provides replacement base O-rings for compatible compressor-cover-style Shortie valves.
VAG Blow-Off Valve Compatibility
The kit also supports compatible Turbosmart Kompact VAG blow-off valves.
VAG refers to the Volkswagen Audi Group family of vehicles.
Turbosmart offers application-specific Kompact blow-off valves for various Volkswagen and Audi turbocharged engines.
The TS-0203-3012 is intended for supported VAG valve configurations requiring the corresponding base O-rings.
Always verify the exact valve part number before ordering.
Importance of Proper Blow-Off Valve Sealing
A turbocharged engine relies on a sealed intake tract to deliver compressed air efficiently.
A damaged blow-off valve base seal can allow pressurized air to escape.
Depending on the vehicle and engine management system, boost leaks may contribute to:
Reduced boost pressure.
Inconsistent turbocharger response.
Reduced engine performance.
Unexpected boost control behavior.
Airflow measurement discrepancies.
Audible air leakage under boost.
Replacing damaged seals helps restore the intended sealing performance when the blow-off valve base is the source of the leak.
Heat and Pressure Cycling
Blow-off valve seals experience repeated temperature changes and pressure fluctuations during normal operation.
Over time, these conditions can contribute to O-ring compression set, hardening, or deterioration.
Removing and reinstalling a blow-off valve can also damage an existing seal if it becomes pinched or incorrectly positioned.
Replacing worn O-rings during maintenance helps reduce the likelihood of leaks after reassembly.
Base O-Ring Kit vs. Standard Kompact O-Ring Kit
Turbosmart offers different O-ring kits for its Kompact blow-off valve range.
TS-0203-3012 – Kompact Shortie/VAG Base O-Ring Kit
Designed for compatible compressor-cover-style Kompact Shortie/VAG valves.
Includes replacement O-rings for the supported base sealing arrangements.
Intended for servicing the corresponding valve mounting interfaces.
TS-0203-3014 – Kompact Dual Port/Plumb Back O-Ring Kit
Designed for compatible standard Kompact Dual Port and Plumb Back blow-off valves.
Intended for a different range of Kompact valve assemblies.
Not interchangeable without confirmed compatibility.
Important: These kits serve different valve configurations. Confirm the installed Turbosmart valve model before selecting replacement seals.
Replacement Seals vs. Complete Blow-Off Valve
The TS-0203-3012 is a maintenance kit rather than a complete blow-off valve.
It is intended to replace the corresponding base sealing components while retaining the existing valve body and internal mechanism.
If the blow-off valve has a damaged piston, actuator, diaphragm, or other internal component, additional servicing or complete valve replacement may be necessary.
Common Reasons for Replacement
Boost Leaks: Replaces damaged base seals identified as the source of pressure leakage.
Worn O-Rings: Restores the intended sealing interface.
Blow-Off Valve Removal: Provides replacement seals during valve servicing.
Turbocharger Maintenance: Supports inspection and repair of compatible valve assemblies.
Heat-Damaged Seals: Replaces O-rings affected by prolonged temperature exposure.
Compressed or Flattened Seals: Restores proper sealing when the original O-rings have lost their shape.
Blow-Off Valve Reinstallation: Helps prevent leaks after removing and reinstalling the valve.
Performance Troubleshooting: Addresses confirmed sealing issues.
Used Blow-Off Valve Restoration: Replaces missing or deteriorated base seals.
Preventative Maintenance: Supports continued reliability of compatible Turbosmart Kompact valves.
Installation Notes
Verify Blow-Off Valve Compatibility: Confirm that the installed valve uses the TS-0203-3012 base O-ring kit.
Review Turbosmart Instructions: Follow the installation procedure for the specific Kompact Shortie/VAG blow-off valve.
Allow the Engine to Cool: Avoid working around hot turbocharger components.
Locate the Blow-Off Valve: Identify the valve's mounting location on the turbocharger or associated intake assembly.
Inspect the Existing Installation: Check for loose mounting hardware, damaged seals, or visible leakage.
Disconnect Associated Components: Remove electrical connectors or hoses where required by the specific valve design.
Remove the Blow-Off Valve: Follow the manufacturer's recommended removal procedure.
Remove the Existing O-Rings: Carefully extract the original seals without damaging their grooves.
Inspect the Sealing Surfaces: Check for scratches, corrosion, debris, or other damage.
Clean the Mounting Interface: Remove contamination using an appropriate cleaning method.
Compare the Replacement Seals: Match the new O-rings to the corresponding original locations.
Install the New O-Rings: Position each seal correctly in its designated groove.
Avoid Twisting or Pinching: Ensure the O-rings remain properly seated during assembly.
Reinstall the Blow-Off Valve: Carefully position the valve against its mounting interface.
Secure the Mounting Hardware: Follow the applicable Turbosmart torque specifications.
Reconnect Removed Components: Reattach any electrical connectors or pressure reference hoses.
Inspect the Installation: Confirm that the valve is fully seated.
Perform a Boost Leak Test: Verify that the repaired mounting interface seals correctly.
Check Blow-Off Valve Operation: Confirm normal operation during controlled testing.
Reinspect After Installation: Check for leaks or loose mounting hardware following initial operation.
Important: Do not use excessive sealant or petroleum-based lubricants unless specifically approved by Turbosmart. Incorrect lubricants or installation methods may damage the replacement O-rings.
What's Included
(1) Turbosmart Kompact Shortie/VAG Base O-Ring Replacement Kit (TS-0203-3012)
Assorted replacement base O-rings for compatible valve configurations.
Note: This listing includes the replacement O-ring kit only. The complete blow-off valve, mounting hardware, turbocharger components, and additional accessories are not included. Turbosmart does not specify the individual O-ring quantities and dimensions in its public product description.
Restore proper sealing and maintain reliable turbocharger performance with the Turbosmart Kompact Shortie/VAG Blow-Off Valve Base O-Ring Replacement Kit (TS-0203-3012).
Designed for compatible compressor-cover-style Kompact Shortie and VAG blow-off valves, this genuine Turbosmart service kit includes high-quality replacement O-rings to help prevent boost leaks and maintain a secure valve mounting interface.
Whether replacing deteriorated seals, servicing an existing blow-off valve, or completing a turbocharger maintenance project, the Turbosmart TS-0203-3012 provides the correct replacement sealing components and genuine Turbosmart quality.
| Part Number: | TS-0203-3012 |
| Brand: | Turbosmart |
| CARB Approved: | No |
Not legal for sale or use in California on any pollution controlled motor vehicles. See http://www.semasan.com/emissions for state by state emissions requirements.
There is a 5% cancellation fee if you order this product and want to ship it to the state of California.
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
This part does not have vehicle specific fitment. Please contact us if you need assistance.
Reviews
No Reviews Yet!
Write a Review