Product Details
| Part Number: | SSU-4H021 |
| Brand: | Swift Springs |
| Location: | Front and Rear |
| Position: | Left and Right (Driver and Passenger) |
| Front Spring Rate: | 2K |
| Rear Spring Rate: | 2K |
- Designed specifically for the 2009–2014 Honda Fit
- Fits the GE8 chassis
- Part of Swift's street-oriented Sport Spring Series
- Approximately 1.2-inch front lowering
- Approximately 1.0-inch rear lowering
- 2.3 kgf/mm front spring rate
- 2.1 kgf/mm rear spring rate
- Helps reduce unsightly factory wheel gap
- Provides a clean, functional OEM-plus stance
- Lowers the vehicle's center of gravity
- Helps reduce body roll during cornering
- Helps control squat and excessive body movement
- Improves overall handling and suspension response
- Designed to maintain a smooth, comfortable street ride
- Engineered around the vehicle's available suspension stroke
- Swift's spring design uses fewer coils to help maximize usable suspension travel and minimize the possibility of coil bind
- Manufactured using Swift's proprietary HS5.TW spring material
- Lightweight spring construction helps reduce unsprung mass
- Designed to react quickly to changing road surfaces
- Developed and tested using the vehicle's original shock absorbers
- Excellent for daily driving, spirited street driving, autocross, and weekend performance use
- Complete front and rear lowering spring set
- Genuine Swift Springs suspension product
- Front: 2.3 kgf/mm
- Rear: 2.1 kgf/mm
- Front: 129 lb/in
- Rear: 118 lb/in
- Front: Approximately 1.2 inches
- Rear: Approximately 1.0 inch
- 2009-2014 Honda Fit
- Chassis: GE8
- Manufacturer: Swift Springs
- Part Number: 4H021 / H021
- Series: Sport
- Product Type: Performance Lowering Springs
- Vehicle: Honda Fit
- Chassis: GE8
- Model Years: 2009–2014
- Front Spring Rate: 2.3 kgf/mm
- Rear Spring Rate: 2.1 kgf/mm
- Front Drop: Approx. 1.2"
- Rear Drop: Approx. 1.0"
- Quantity: Complete Front & Rear Spring Set
- Swift developed its Sport Springs around three primary goals: maintaining or improving ride comfort, increasing handling performance by reducing body roll and squat, and lowering the vehicle while remaining within the usable stroke of the suspension.
- This makes the 4H021 an excellent choice for Honda Fit owners who want improved handling and appearance without moving to a significantly stiffer full coilover suspension.
- Swift notes that actual lowering amounts can vary depending on vehicle condition, model options, and suspension condition. Their listed drop measurements are based on testing with the manufacturer's original shock absorbers, and aftermarket dampers may alter final ride height.
- A professional four-wheel alignment is recommended after installation to ensure proper tire wear, handling, and suspension geometry.
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
| Year | Make | Model | Trim |
|---|---|---|---|
| 2009 | Honda | Fit | Base |
| 2009 | Honda | Fit | Sport |
| 2010 | Honda | Fit | Base |
| 2010 | Honda | Fit | Sport |
| 2011 | Honda | Fit | Base |
| 2011 | Honda | Fit | Sport |
| 2012 | Honda | Fit | Base |
| 2012 | Honda | Fit | Sport |
| 2013 | Honda | Fit | Base |
| 2013 | Honda | Fit | EV |
| 2013 | Honda | Fit | Sport |
| 2014 | Honda | Fit | EV |
Reviews ★★★★★
No Reviews Yet!
Write a Review