Images may be for reference only
Product Details
| Part Number: | PRL.1182.1.0 |
| Brand: | PRL Motorsports |
If you’re replacing or upgrading the turbo on your 10th-generation Civic 1.5T, this is the kit you want on the bench before the install begins.
This PRL Motorsports Turbo Gasket Kit was developed specifically for 2016–2021 Honda Civic 1.5T owners performing a turbo swap. Whether you’re installing a factory replacement turbo, a PRL turbocharger, or another aftermarket unit, this complete hardware and gasket package provides everything needed for a proper drop-in installation.
Our engineering team reverse-engineered the OEM components to ensure precise fitment and sealing while dramatically reducing cost. Purchasing all of these pieces individually through OEM channels can exceed $246, while this single kit consolidates every required sealing component and piece of hardware into one organized solution. It eliminates last-minute parts runs, prevents reusing worn hardware, and helps ensure the turbo install is completed correctly the first time.
This kit will also be included with upcoming PRL 10th Gen Civic turbocharger releases.
Key Features:
- Complete turbo installation hardware and sealing kit for 2016–2021 Civic 1.5T
- Designed for factory turbo replacement or aftermarket turbocharger upgrades
- Reverse engineered from OEM components for precise fitment
- Prevents reusing stretched studs, crushed washers, or worn gaskets
- Saves over $140 compared to purchasing OEM components individually
- Ensures proper oil, coolant, and exhaust sealing during turbo installation
- Zinc-plated steel studs and bolts for durability and corrosion resistance
- MLS (multi-layer steel) oil and coolant gaskets for reliable sealing
- Copper oil feed line crush washer for proper oil line sealing
Fitment:
- 2016–2021 Honda Civic 1.5T (10th Generation)
Includes:
- All parts listed below are replicas of the corresponding OEM Honda components.
Hardware:
- Turbo studs (4)
- Coolant line studs (2)
- Cylinder head to turbo exhaust inlet bolts (2)
- Turbo to downpipe bolts (2)
- Turbo lock nuts (4)
- Turbo inlet stud (1)
Gaskets & Sealing Components:
- Cylinder head to turbo gasket (1)
- Turbo to downpipe gasket (1)
- Coolant line gasket (1)
- Oil return line gasket (1)
- Oil feed line mesh filter (1)
- Oil feed line banjo bolt crush washer (1)
Additional Installation Hardware:
- Wastegate arm cotter pin (1)
- Electronic wastegate M4 x 16mm socket head cap screws with captured washers (4)
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
| Year | Make | Model | Trim |
|---|---|---|---|
| 2016 | Honda | Civic | EX-L |
| 2016 | Honda | Civic | EX-T |
| 2016 | Honda | Civic | Touring |
| 2017 | Honda | Civic | EX |
| 2017 | Honda | Civic | EX-L |
| 2017 | Honda | Civic | EX-T |
| 2017 | Honda | Civic | LX |
| 2017 | Honda | Civic | Si |
| 2017 | Honda | Civic | Touring |
| 2018 | Honda | Civic | EX |
| 2018 | Honda | Civic | EX-L |
| 2018 | Honda | Civic | EX-T |
| 2018 | Honda | Civic | Si |
| 2018 | Honda | Civic | Touring |
| 2019 | Honda | Civic | EX |
| 2019 | Honda | Civic | EX-L |
| 2019 | Honda | Civic | Si |
| 2019 | Honda | Civic | Touring |
| 2020 | Honda | Civic | EX |
| 2020 | Honda | Civic | EX-L |
| 2020 | Honda | Civic | LX |
| 2020 | Honda | Civic | Si |
| 2020 | Honda | Civic | Touring |
| 2021 | Honda | Civic | EX |
| 2021 | Honda | Civic | EX-L |
| 2021 | Honda | Civic | LX |
| 2021 | Honda | Civic | Touring |
Engine Fitment
Honda 1.5L/1497CC - 4 Cylinder (L15B7)
Honda 1.5L/1497CC - 4 Cylinder (L15B7)
Honda 1.5L/1497CC - 4 Cylinder (L15B7)
Honda 1.5L/1497CC - 4 Cylinder (L15B7)
Reviews ★★★★★
No Reviews Yet!
Write a Review