The MBRP Universal Burnt Stainless Steel Exhaust Tip (T5191BE) is a premium exhaust finishing accessory designed to enhance the appearance of vehicles equipped with compatible 2.5-inch exhaust piping. Featuring high-quality T304 stainless steel construction, a mirror-polished finish, and a distinctive burnt blue-to-orange gradient, this exhaust tip delivers aggressive motorsport-inspired styling without requiring replacement of the complete exhaust system.

Engineered for performance enthusiasts seeking a combination of durability and appearance, the MBRP T5191BE features a single-wall, angle-cut design that creates a clean, aggressive exhaust outlet. The larger 4.5-inch outlet provides a bold visual upgrade over conventional factory exhaust tips, while the polished stainless steel surface adds a premium finishing touch.

Manufactured from corrosion-resistant T304 stainless steel, this exhaust tip is designed to withstand the demanding conditions commonly encountered by automotive exhaust components. Its stainless steel construction provides excellent resistance to corrosion, making it suitable for daily-driven performance vehicles and custom exhaust applications.

One of the standout features of the T5191BE is its burnt-finish exhaust outlet, which incorporates a blue-to-orange gradient at the end of the polished stainless steel tip. This distinctive finish provides a race-inspired appearance that complements aftermarket exhaust systems, rear diffusers, performance bumpers, and other exterior modifications.

Featuring a 2.5-inch inlet diameter, 4.5-inch outlet diameter, and 6.5-inch overall length, the MBRP T5191BE is designed for universal applications using compatible exhaust tailpipes. Its bolt-on installation design makes it a convenient option for upgrading the appearance of an existing exhaust system without extensive fabrication when the appropriate mounting dimensions and clearance are available.

Whether completing a custom Honda or Acura exhaust system, upgrading a daily-driven performance vehicle, or replacing an outdated factory exhaust tip, the MBRP T5191BE delivers premium materials, distinctive styling, and the quality expected from MBRP performance products.

Features

• Premium T304 Stainless Steel Construction: Provides excellent corrosion resistance, durability, and long-term reliability.

• Distinctive Burnt-Finish Outlet: Features a blue-to-orange gradient for an aggressive motorsport-inspired appearance.

• Mirror-Polished Stainless Steel Surface: Creates a premium finish that complements aftermarket exhaust systems.

• Single-Wall Exhaust Tip Design: Offers a clean, lightweight appearance with a traditional performance exhaust profile.

• Aggressive Angle-Cut Outlet: Enhances the vehicle's rear-end styling with a sporty exhaust opening.

• 2.5-Inch Inlet Diameter: Designed for compatible exhaust systems utilizing 2.5-inch tailpipe connections.

• 4.5-Inch Outlet Diameter: Larger exhaust outlet provides a bold appearance compared to standard factory exhaust tips.

• 6.5-Inch Overall Length: Compact dimensions allow installation in a variety of compatible rear bumper configurations.

• Universal Application: Suitable for properly sized exhaust systems across multiple vehicle makes and models.

• Bolt-On Installation: Designed for straightforward attachment to compatible exhaust tailpipes.

• Corrosion-Resistant Materials: T304 stainless steel construction helps resist rust and deterioration.

• Premium Exhaust Styling: Provides a distinctive appearance without requiring a complete exhaust system replacement.

• Custom Exhaust Compatibility: Suitable for custom exhaust fabrication and properly sized aftermarket exhaust systems.

• Performance Vehicle Applications: Complements street performance builds, turbocharged applications, and modified vehicles.

• Sold Individually: Suitable for single-outlet applications or custom multiple-tip configurations.

• MBRP Performance Engineering: Manufactured using MBRP's premium exhaust component construction standards.

• Lifetime Warranty: Backed by MBRP's manufacturer warranty against qualifying defects in materials and workmanship.

Popular Performance Applications

• Honda Civic Performance Builds: Provides a premium exhaust finishing option for compatible aftermarket exhaust systems.

• Acura Integra Performance Builds: Adds burnt stainless steel styling to properly sized exhaust outlets.

• Honda S2000 Custom Exhaust Systems: Suitable for aftermarket exhaust configurations utilizing compatible 2.5-inch tailpipes.

• Honda Accord Performance Builds: Enhances the appearance of custom exhaust systems with properly sized connections.

• K-Series Engine Swaps: Ideal for custom K20 and K24 exhaust systems utilizing compatible 2.5-inch tailpipe outlets.

• B-Series Performance Builds: Complements aftermarket exhaust systems on modified B16, B18, and B20 applications.

• Turbocharged Honda and Acura Builds: Adds aggressive styling to compatible custom turbocharged exhaust configurations.

• Custom Cat-Back Exhaust Systems: Provides a premium finishing component for fabricated or modified exhaust assemblies.

• Aftermarket Axle-Back Exhaust Systems: Suitable for compatible exhaust systems requiring an upgraded or replacement exhaust tip.

• Street and Show Vehicles: Enhances rear-end styling with a distinctive burnt stainless steel finish.

Additional Information

• Manufacturer: MBRP
• Part Number: T5191BE
• Product Type: Universal Exhaust Tip
• Material: T304 Stainless Steel
• Finish: Mirror-Polished Stainless Steel with Burnt Blue-Orange Gradient
• Exhaust Tip Style: Single-Wall, Angle-Cut
• Tip Shape: Round
• Inlet Diameter: 2.5 Inches
• Outlet Diameter: 4.5 Inches
• Overall Length: 6.5 Inches
• Installation Type: Bolt-On
• Exhaust Configuration: Single Outlet
• Vehicle Fitment: Universal, Based on Exhaust Pipe Dimensions
• Quantity: Sold Individually
• Warranty: MBRP Lifetime Warranty
• UPC: 882963131782

Fitment Information:

The MBRP T5191BE is a universal exhaust tip rather than a vehicle-specific replacement component. Compatibility depends on the dimensions and configuration of the existing exhaust system.

For proper fitment, verify the following measurements:

• Exhaust Tip Inlet Diameter: 2.5 inches

• Exhaust Tip Outlet Diameter: 4.5 inches

• Overall Exhaust Tip Length: 6.5 inches

• Exhaust Pipe Compatibility: Requires a compatible 2.5-inch tailpipe connection.

• Rear Bumper Clearance: Verify sufficient space for the larger 4.5-inch outlet.

• Installation Clearance: Confirm adequate distance from heat-sensitive body panels, rear diffusers, and surrounding components.

Important Fitment Information:

This exhaust tip does not provide guaranteed direct fitment for any specific Honda, Acura, or other vehicle application. Always verify the existing exhaust pipe diameter and available mounting clearance before ordering.

Vehicles equipped with dual or multiple exhaust outlets may require additional exhaust tips, sold separately.

Performance Information:

The MBRP T5191BE is primarily an appearance upgrade designed to enhance the exhaust outlet's styling.

Installing an exhaust tip alone should not be expected to produce measurable horsepower or torque gains or significantly alter the exhaust sound.

Common Reasons for Replacement

• Factory Exhaust Appearance: Replaces a plain or outdated exhaust outlet with premium burnt stainless steel styling.

• Performance Exhaust Customization: Adds a distinctive finishing touch to compatible aftermarket exhaust systems.

• Motorsport-Inspired Styling: Burnt blue-orange finish complements aggressive exterior modifications.

• Damaged Exhaust Tips: Replaces scratched, dented, or otherwise damaged exhaust outlets.

• Corroded Exhaust Components: Upgrades to corrosion-resistant T304 stainless steel construction.

• Custom Exhaust Fabrication: Provides a premium outlet option for custom-built exhaust systems.

• Aggressive Rear-End Appearance: Larger 4.5-inch outlet creates a bold performance-oriented look.

• Exhaust System Refresh: Updates the appearance of an existing exhaust without replacing the complete system.

• Premium Material Upgrades: Provides durable stainless steel construction with a distinctive polished finish.

• Street and Show Builds: Complements modified vehicles featuring aftermarket bumpers, rear diffusers, and performance exhaust systems.

Installation Notes

1. Verify Exhaust Pipe Diameter: Confirm that the existing exhaust tailpipe is compatible with the 2.5-inch inlet diameter.

2. Measure Available Clearance: Ensure sufficient space for the 4.5-inch outlet and 6.5-inch overall length.

3. Allow the Exhaust to Cool: Make sure all exhaust components have cooled completely before beginning installation.

4. Safely Position the Vehicle: Park on a level surface and safely raise the vehicle if additional access is necessary.

5. Inspect the Existing Exhaust: Check the tailpipe for damage, excessive corrosion, or other conditions that may interfere with installation.

6. Remove the Existing Exhaust Tip: Remove the original exhaust tip if necessary, following the appropriate procedures for its mounting configuration.

7. Clean the Exhaust Connection: Remove accumulated dirt, rust, or debris from the existing tailpipe.

8. Test-Fit the MBRP Exhaust Tip: Position the new tip over the exhaust connection to verify proper fitment.

9. Check Tip Orientation: Rotate the tip to achieve the desired angle-cut appearance.

10. Verify Rear Bumper Clearance: Ensure sufficient space between the exhaust tip and nearby bumper components.

11. Secure the Exhaust Tip: Attach the tip using the appropriate bolt-on mounting hardware and manufacturer's installation procedures.

12. Check Exhaust Alignment: Confirm that the exhaust tip is centered and positioned correctly within the rear bumper opening.

13. Inspect Surrounding Components: Verify adequate clearance from plastic trim, rear diffusers, heat shields, and suspension components.

14. Confirm Installation Security: Ensure the exhaust tip is securely attached and cannot rotate or move during operation.

15. Inspect After Initial Operation: Recheck the installation after several exhaust heating and cooling cycles.

16. Maintain the Stainless Steel Finish: Clean using products suitable for polished and burnt-finish stainless steel. Avoid abrasive cleaning materials that may damage the colored finish.

17. Professional Installation Recommended: Custom exhaust applications may require professional assistance to ensure proper alignment and secure attachment.

Important: Do not assume that a universal exhaust tip will directly attach to every 2.5-inch exhaust system. Verify the correct attachment method and any required mounting hardware before installation.

Maintain adequate clearance between the exhaust tip and surrounding bodywork to help prevent heat-related damage.

What's Included

• (1) MBRP Universal Burnt T304 Stainless Steel Exhaust Tip (T5191BE)

• Single-Wall, Angle-Cut Exhaust Tip Assembly

Note: Exhaust piping, mufflers, catalytic converters, additional exhaust tips, and custom fabrication components are not included. Verify any required mounting hardware before installation.

Enhance your vehicle's exhaust system with the MBRP Universal Burnt T304 Stainless Steel Exhaust Tip (T5191BE) for premium motorsport-inspired styling, durable construction, and an aggressive single-wall angle-cut design.

Featuring a 2.5-inch inlet, 4.5-inch outlet, 6.5-inch overall length, mirror-polished T304 stainless steel construction, and distinctive burnt blue-orange gradient finish, this universal exhaust tip provides an excellent finishing touch for compatible performance exhaust systems.

Whether upgrading a Honda or Acura performance build, completing a custom K-Series exhaust, or refreshing the appearance of an existing aftermarket exhaust system, MBRP delivers a premium stainless steel exhaust accessory designed to complement your vehicle's performance-focused styling.