The MBRP Universal Polished Stainless Steel Exhaust Tip (T5191) is a premium exhaust finishing accessory designed to enhance the appearance of vehicles equipped with compatible 2.5-inch exhaust piping. Featuring high-quality T304 stainless steel construction, a mirror-polished finish, and an aggressive single-wall angle-cut design, this exhaust tip delivers a clean, performance-inspired appearance without requiring replacement of the entire exhaust system.

Manufactured from corrosion-resistant T304 stainless steel, the MBRP T5191 offers excellent durability and long-term resistance to rust and deterioration. Its premium stainless steel construction makes it an excellent choice for daily-driven performance vehicles, custom exhaust systems, and enthusiasts seeking a high-quality alternative to conventional factory exhaust tips.

The exhaust tip features a 2.5-inch inlet diameter, 4.5-inch outlet diameter, and 6.5-inch overall length, providing a bold appearance while maintaining a compact design suitable for a variety of compatible exhaust configurations. Its larger outlet creates a more aggressive rear-end appearance, while the angle-cut opening adds a refined motorsport-inspired finishing detail.

Unlike dual-wall or carbon fiber exhaust tips, the MBRP T5191 features a traditional single-wall stainless steel design. This construction provides a clean, classic performance appearance that complements a wide range of aftermarket exhaust systems and exterior styling modifications.

The mirror-polished finish enhances the stainless steel surface, creating a bright, reflective appearance that pairs well with aftermarket rear diffusers, performance bumpers, and other exterior upgrades.

Designed for universal applications, the MBRP T5191 utilizes a bolt-on installation configuration, allowing it to be installed on compatible exhaust tailpipes without welding. This makes it a convenient option for enthusiasts looking to refresh or customize their exhaust system's appearance.

Whether completing a custom Honda or Acura exhaust build, upgrading an existing performance exhaust, or replacing a worn factory exhaust tip, the MBRP T5191 delivers premium materials, timeless styling, and the quality expected from MBRP performance products.

Features

• Premium T304 Stainless Steel Construction: Provides excellent corrosion resistance, durability, and long-term reliability.

• Mirror-Polished Stainless Steel Finish: Delivers a bright, reflective appearance that complements aftermarket exhaust systems.

• Single-Wall Exhaust Tip Design: Features a traditional performance exhaust appearance with a clean, straightforward construction.

• Aggressive Angle-Cut Outlet: Adds a sporty finishing detail to the vehicle's rear-end styling.

• 2.5-Inch Inlet Diameter: Designed for compatible exhaust systems utilizing 2.5-inch tailpipe connections.

• 4.5-Inch Outlet Diameter: Larger exhaust outlet creates a bold appearance compared to many factory exhaust tips.

• 6.5-Inch Overall Length: Compact dimensions allow installation in a variety of compatible rear bumper configurations.

• Round Exhaust Tip Design: Provides a classic performance exhaust appearance.

• Universal Application: Suitable for properly sized exhaust systems across multiple vehicle makes and models.

• Bolt-On Installation: Designed for installation on compatible tailpipes without requiring welding.

• Corrosion-Resistant Materials: T304 stainless steel helps resist rust and deterioration from normal exhaust exposure.

• Handcrafted Construction: Manufactured using MBRP's premium exhaust component production methods.

• Custom Exhaust Compatibility: Suitable for fabricated exhaust systems and appropriately sized aftermarket exhaust configurations.

• Performance Vehicle Styling: Complements street performance builds, turbocharged applications, and modified vehicles.

• Sold Individually: Suitable for single-outlet applications or custom multiple-tip arrangements.

• MBRP Performance Engineering: Designed to complement MBRP's premium performance exhaust product lineup.

• Lifetime Warranty: Backed by MBRP's manufacturer warranty against qualifying defects in materials and workmanship.

Popular Performance Applications

• Honda Civic Performance Builds: Provides a premium exhaust finishing option for compatible aftermarket exhaust systems.

• Acura Integra Performance Builds: Adds polished stainless steel styling to properly sized exhaust outlets.

• Honda S2000 Custom Exhaust Systems: Suitable for aftermarket exhaust configurations utilizing compatible 2.5-inch tailpipes.

• Honda Accord Performance Builds: Enhances the appearance of custom exhaust systems with properly sized connections.

• K-Series Engine Swaps: Ideal for custom K20 and K24 exhaust systems utilizing compatible 2.5-inch tailpipe outlets.

• B-Series Performance Builds: Complements aftermarket exhaust systems on modified B16, B18, and B20 applications.

• Turbocharged Honda and Acura Builds: Adds a clean performance appearance to compatible custom exhaust configurations.

• Custom Cat-Back Exhaust Systems: Provides a premium finishing component for fabricated or modified exhaust assemblies.

• Aftermarket Axle-Back Exhaust Systems: Suitable for compatible exhaust systems requiring an upgraded or replacement exhaust tip.

• Street and Show Vehicles: Enhances rear-end styling with a timeless polished stainless steel finish.

Additional Information

• Manufacturer: MBRP
• Part Number: T5191
• Product Type: Universal Exhaust Tip
• Material: T304 Stainless Steel
• Finish: Mirror-Polished Stainless Steel
• Exhaust Tip Style: Single-Wall, Angle-Cut
• Tip Shape: Round
• Inlet Diameter: 2.5 Inches
• Outlet Diameter: 4.5 Inches
• Overall Length: 6.5 Inches
• Installation Type: Bolt-On
• Exhaust Configuration: Single Outlet
• Vehicle Fitment: Universal, Based on Exhaust Pipe Dimensions
• Quantity: Sold Individually
• Warranty: MBRP Lifetime Warranty
• UPC: 882963131775

Fitment Information:

The MBRP T5191 is a universal exhaust tip rather than a vehicle-specific replacement component. Compatibility depends on the dimensions and configuration of the existing exhaust system.

For proper fitment, verify the following measurements:

• Exhaust Tip Inlet Diameter: 2.5 inches

• Exhaust Tip Outlet Diameter: 4.5 inches

• Overall Exhaust Tip Length: 6.5 inches

• Exhaust Pipe Compatibility: Requires a compatible 2.5-inch tailpipe connection.

• Rear Bumper Clearance: Verify sufficient space for the larger 4.5-inch outlet.

• Installation Clearance: Confirm adequate distance from heat-sensitive body panels, rear diffusers, and surrounding components.

Important Fitment Information:

This exhaust tip does not provide guaranteed direct fitment for any specific Honda, Acura, or other vehicle application. Always verify the existing exhaust pipe diameter, available mounting clearance, and attachment configuration before ordering.

Vehicles equipped with dual or multiple exhaust outlets may require additional exhaust tips, sold separately.

Performance Information:

The MBRP T5191 is primarily an appearance upgrade designed to enhance the exhaust outlet's styling.

Installing an exhaust tip alone should not be expected to produce measurable horsepower or torque gains or significantly alter the exhaust sound.

Common Reasons for Replacement

• Factory Exhaust Appearance: Replaces a plain or outdated exhaust outlet with premium polished stainless steel styling.

• Performance Exhaust Customization: Adds a clean finishing touch to compatible aftermarket exhaust systems.

• Classic Performance Styling: Mirror-polished stainless steel complements a wide range of exterior modifications.

• Damaged Exhaust Tips: Replaces scratched, dented, or otherwise damaged exhaust outlets.

• Corroded Exhaust Components: Upgrades to corrosion-resistant T304 stainless steel construction.

• Custom Exhaust Fabrication: Provides a premium outlet option for custom-built exhaust systems.

• Aggressive Rear-End Appearance: Larger 4.5-inch outlet creates a bold performance-oriented look.

• Exhaust System Refresh: Updates the appearance of an existing exhaust without replacing the complete system.

• Premium Material Upgrades: Provides durable stainless steel construction with a high-quality polished finish.

• Street and Show Builds: Complements modified vehicles featuring aftermarket bumpers, rear diffusers, and performance exhaust systems.

Installation Notes

1. Verify Exhaust Pipe Diameter: Confirm that the existing exhaust tailpipe is compatible with the 2.5-inch inlet diameter.

2. Measure Available Clearance: Ensure sufficient space for the 4.5-inch outlet and 6.5-inch overall length.

3. Allow the Exhaust to Cool: Make sure all exhaust components have cooled completely before beginning installation.

4. Safely Position the Vehicle: Park on a level surface and safely raise the vehicle if additional access is necessary.

5. Inspect the Existing Exhaust: Check the tailpipe for damage, excessive corrosion, or other conditions that may interfere with installation.

6. Remove the Existing Exhaust Tip: Remove the original exhaust tip if necessary, following the appropriate procedures for its mounting configuration.

7. Clean the Exhaust Connection: Remove accumulated dirt, rust, or debris from the existing tailpipe.

8. Test-Fit the MBRP Exhaust Tip: Position the new tip over the exhaust connection to verify proper fitment.

9. Check Tip Orientation: Rotate the tip to achieve the desired angle-cut appearance.

10. Verify Rear Bumper Clearance: Ensure sufficient space between the exhaust tip and nearby bumper components.

11. Secure the Exhaust Tip: Attach the tip using the appropriate bolt-on mounting method and manufacturer's installation recommendations.

12. Check Exhaust Alignment: Confirm that the exhaust tip is centered and positioned correctly within the rear bumper opening.

13. Inspect Surrounding Components: Verify adequate clearance from plastic trim, rear diffusers, heat shields, and suspension components.

14. Confirm Installation Security: Ensure the exhaust tip is securely attached and cannot rotate or move during operation.

15. Inspect After Initial Operation: Recheck the installation after several exhaust heating and cooling cycles.

16. Maintain the Stainless Steel Finish: Clean using products suitable for polished stainless steel. Avoid abrasive materials that may scratch the surface.

17. Professional Installation Recommended: Custom exhaust applications may require professional assistance to ensure proper alignment and secure attachment.

Important: Do not assume that a universal exhaust tip will directly attach to every 2.5-inch exhaust system. Verify the correct attachment method and any required mounting hardware before installation.

Maintain adequate clearance between the exhaust tip and surrounding bodywork to help prevent heat-related damage.

What's Included

• (1) MBRP Universal Polished T304 Stainless Steel Exhaust Tip (T5191)

• Single-Wall, Angle-Cut Exhaust Tip Assembly

Note: Exhaust piping, mufflers, catalytic converters, additional exhaust tips, and custom fabrication components are not included. Confirm any required mounting hardware before installation.

Enhance your vehicle's exhaust system with the MBRP Universal Polished T304 Stainless Steel Exhaust Tip (T5191) for premium performance styling, durable construction, and an aggressive single-wall angle-cut design.

Featuring a 2.5-inch inlet, 4.5-inch outlet, 6.5-inch overall length, and mirror-polished T304 stainless steel construction, this universal exhaust tip provides an excellent finishing touch for compatible performance exhaust systems.

Whether upgrading a Honda or Acura performance build, completing a custom K-Series exhaust, or refreshing the appearance of an existing aftermarket exhaust system, MBRP delivers a premium stainless steel exhaust accessory designed to complement your vehicle's performance-focused styling.