The MBRP Universal Carbon Fiber Exhaust Tip (T5184CF) is a premium exhaust finishing accessory designed to enhance the appearance of vehicles equipped with compatible 3-inch exhaust piping. Featuring genuine carbon fiber construction, a mirror-polished T304 stainless steel inner sleeve, and an aggressive dual-wall angle-cut design, this exhaust tip delivers distinctive motorsport-inspired styling without requiring replacement of the complete exhaust system.

Manufactured using a combination of premium carbon fiber and corrosion-resistant stainless steel, the MBRP T5184CF provides an attractive balance of durability, visual appeal, and performance-oriented design. Its carbon fiber exterior creates a distinctive woven appearance, while the polished stainless steel inner sleeve provides a clean, reflective contrast.

The exhaust tip features a 3-inch inlet diameter, 5-inch outlet diameter, and 6.13-inch overall length, making it an excellent option for compatible aftermarket exhaust systems, custom exhaust configurations, and performance vehicles utilizing 3-inch tailpipe connections.

One of the standout features of the T5184CF is its large 5-inch outlet, which creates an aggressive rear-end appearance compared to conventional factory exhaust tips. The dual-wall construction provides a substantial, premium look, while the angle-cut opening adds a distinctive motorsport-inspired finishing detail.

Unlike traditional polished stainless steel exhaust tips, the MBRP T5184CF features a genuine carbon fiber outer wall that complements aftermarket rear diffusers, carbon fiber spoilers, performance bumpers, and other exterior modifications. The combination of carbon fiber and polished stainless steel makes it particularly appealing for enthusiasts building a cohesive, race-inspired exterior.

The T5184CF is manufactured with MBRP's premium handcrafted construction methods, providing a high-quality exhaust finishing component designed to complement a wide range of custom automotive applications.

Designed for universal fitment, this exhaust tip allows enthusiasts to customize the appearance of an existing exhaust system without replacing the entire exhaust assembly. Its no-weld installation design provides a convenient upgrade when the existing tailpipe dimensions and mounting configuration are compatible.

Whether completing a custom Honda or Acura exhaust build, upgrading an existing performance exhaust, or replacing a worn factory exhaust tip, the MBRP T5184CF delivers premium materials, aggressive styling, and the quality expected from MBRP performance products.

Features

• Premium Carbon Fiber Outer Wall: Genuine carbon fiber construction provides a distinctive motorsport-inspired appearance.

• Mirror-Polished T304 Stainless Steel Inner Sleeve: Durable stainless steel construction offers corrosion resistance and a premium contrasting finish.

• Dual-Wall Exhaust Tip Design: Combines carbon fiber and stainless steel for a substantial, high-quality exhaust outlet.

• Aggressive Angle-Cut Outlet: Enhances the vehicle's rear-end styling with a performance-oriented exhaust opening.

• 3-Inch Inlet Diameter: Designed for compatible exhaust systems utilizing 3-inch tailpipe connections.

• 5-Inch Outlet Diameter: Large exhaust outlet creates a bold appearance compared to many factory exhaust tips.

• 6.13-Inch Overall Length: Compact design provides installation versatility for compatible rear bumper configurations.

• Round Exhaust Tip Configuration: Delivers a classic performance exhaust shape with modern carbon fiber styling.

• Premium Carbon Fiber Finish: Complements carbon fiber rear diffusers, spoilers, and other aerodynamic accessories.

• Corrosion-Resistant Inner Construction: T304 stainless steel helps resist rust and deterioration from normal exhaust exposure.

• Handcrafted Construction: Manufactured using MBRP's premium carbon fiber exhaust tip production methods.

• Universal Application: Suitable for properly sized exhaust systems across multiple vehicle makes and models.

• No-Weld Installation Design: Intended for installation without welding when the tailpipe and attachment configuration are compatible.

• Custom Exhaust Compatibility: Suitable for fabricated exhaust systems and appropriately sized aftermarket exhaust configurations.

• Performance Vehicle Styling: Complements street performance builds, turbocharged applications, and modified vehicles.

• Premium Exhaust Customization: Provides a distinctive appearance without requiring replacement of the complete exhaust system.

• Sold Individually: Suitable for single-outlet applications or custom multiple-tip arrangements.

• MBRP Performance Quality: Designed to complement MBRP's premium performance exhaust product lineup.

Popular Performance Applications

• Honda Civic Performance Builds: Provides a premium carbon fiber finishing option for compatible aftermarket exhaust systems.

• Acura Integra Performance Builds: Adds motorsport-inspired styling to properly sized performance exhaust outlets.

• Honda Civic Type R Custom Exhaust Systems: Suitable for custom exhaust fabrication where the 3-inch inlet and available clearance permit.

• Honda S2000 Performance Builds: Complements compatible aftermarket exhaust systems utilizing 3-inch tailpipe connections.

• Honda Accord Performance Builds: Enhances the appearance of custom exhaust systems with properly sized outlets.

• K-Series Engine Swaps: Ideal for custom K20 and K24 exhaust systems utilizing compatible 3-inch tailpipe connections.

• B-Series Turbocharged Builds: Provides a premium finishing component for modified turbocharged exhaust systems.

• Turbocharged Honda and Acura Applications: Complements custom performance exhaust configurations with compatible tailpipe dimensions.

• Custom Cat-Back Exhaust Systems: Adds a distinctive carbon fiber finishing component to fabricated or modified exhaust assemblies.

• Aftermarket Axle-Back Exhaust Systems: Suitable for compatible exhaust systems requiring an upgraded or replacement exhaust tip.

• Street and Show Vehicles: Enhances rear-end styling with a premium carbon fiber and polished stainless steel finish.

Additional Information

• Manufacturer: MBRP
• Part Number: T5184CF
• Product Type: Universal Exhaust Tip
• Outer Material: Genuine Carbon Fiber
• Inner Material: T304 Stainless Steel
• Finish: Carbon Fiber with Mirror-Polished Stainless Steel Interior
• Exhaust Tip Style: Dual-Wall, Angle-Cut
• Tip Shape: Round
• Inlet Diameter: 3 Inches
• Outlet Diameter: 5 Inches
• Overall Length: 6.13 Inches
• Installation Type: Universal, No-Weld Design; Verify Mounting Configuration
• Exhaust Configuration: Single Outlet
• Vehicle Fitment: Universal, Based on Exhaust Pipe Dimensions
• Quantity: Sold Individually
• UPC: 882963130457
• Manufacturer Warranty: Not Specified by MBRP

Fitment Information:

The MBRP T5184CF is a universal exhaust tip rather than a vehicle-specific replacement component. Compatibility depends on the dimensions and configuration of the existing exhaust system.

For proper fitment, verify the following measurements:

• Exhaust Tip Inlet Diameter: 3 inches

• Exhaust Tip Outlet Diameter: 5 inches

• Overall Exhaust Tip Length: 6.13 inches

• Exhaust Pipe Compatibility: Requires a compatible 3-inch tailpipe connection.

• Rear Bumper Clearance: Verify sufficient space for the larger 5-inch outlet.

• Installation Clearance: Confirm adequate distance from heat-sensitive body panels, rear diffusers, and surrounding components.

• Mounting Configuration: Verify compatibility with the exhaust tip's intended attachment design.

Important Fitment Information:

This exhaust tip does not provide guaranteed direct fitment for any specific Honda, Acura, or other vehicle application. Always verify the existing exhaust pipe outside diameter, available mounting clearance, and attachment configuration before ordering.

Vehicles equipped with dual or multiple exhaust outlets may require additional exhaust tips, sold separately.

Performance Information:

The MBRP T5184CF is primarily an appearance upgrade designed to enhance the exhaust outlet's styling.

Installing an exhaust tip alone should not be expected to produce measurable horsepower or torque gains or significantly alter exhaust sound.

Common Reasons for Replacement

• Factory Exhaust Appearance: Replaces a plain or outdated exhaust outlet with premium carbon fiber styling.

• Performance Exhaust Customization: Adds a distinctive finishing touch to compatible aftermarket exhaust systems.

• Carbon Fiber Exterior Upgrades: Complements carbon fiber rear diffusers, spoilers, and other aerodynamic components.

• Damaged Exhaust Tips: Replaces scratched, dented, or otherwise damaged exhaust outlets.

• Corroded Exhaust Components: Upgrades to a premium carbon fiber design with corrosion-resistant T304 stainless steel inner construction.

• Custom Exhaust Fabrication: Provides a premium outlet option for custom-built exhaust systems.

• Aggressive Rear-End Appearance: Large 5-inch outlet creates a bold performance-oriented look.

• Dual-Wall Styling: Offers a substantial appearance compared to traditional single-wall exhaust tips.

• Exhaust System Refresh: Updates the appearance of an existing exhaust without replacing the complete system.

• Premium Material Upgrades: Combines genuine carbon fiber styling with durable polished stainless steel construction.

• Street and Show Builds: Complements modified vehicles featuring aftermarket bumpers, rear diffusers, and performance exhaust systems.

Installation Notes

1. Verify Exhaust Pipe Diameter: Confirm that the existing exhaust tailpipe is compatible with the 3-inch inlet diameter.

2. Measure Available Clearance: Ensure sufficient space for the 5-inch outlet and 6.13-inch overall length.

3. Allow the Exhaust to Cool: Make sure all exhaust components have cooled completely before beginning installation.

4. Safely Position the Vehicle: Park on a level surface and safely raise the vehicle if additional access is necessary.

5. Inspect the Existing Exhaust: Check the tailpipe for damage, excessive corrosion, or other conditions that may interfere with installation.

6. Remove the Existing Exhaust Tip: Remove the original exhaust tip if necessary, following the appropriate procedures for its mounting configuration.

7. Clean the Exhaust Connection: Remove accumulated dirt, rust, or debris from the existing tailpipe.

8. Test-Fit the MBRP Exhaust Tip: Position the new tip over the exhaust connection to verify proper fitment.

9. Check Tip Orientation: Rotate the exhaust tip to achieve the desired angle-cut appearance.

10. Verify Rear Bumper Clearance: Ensure sufficient space between the carbon fiber exterior and nearby bumper components.

11. Confirm the Attachment Method: Identify the exhaust tip's intended mounting arrangement before securing it.

12. Secure the Exhaust Tip: Install using the appropriate attachment method and manufacturer's installation recommendations.

13. Check Exhaust Alignment: Confirm that the exhaust tip is centered and positioned correctly within the rear bumper opening.

14. Inspect Surrounding Components: Verify adequate clearance from plastic trim, rear diffusers, heat shields, and suspension components.

15. Confirm Installation Security: Ensure the exhaust tip is securely attached and cannot rotate or move during operation.

16. Inspect After Initial Operation: Recheck the installation after several exhaust heating and cooling cycles.

17. Maintain the Carbon Fiber Finish: Clean using mild automotive cleaning products and a soft microfiber cloth. Avoid abrasive cleaners or polishing compounds that may damage the carbon fiber surface.

18. Professional Installation Recommended: Custom exhaust applications may require professional assistance to ensure proper alignment and secure attachment.

Important: Do not assume that a universal exhaust tip will directly attach to every 3-inch exhaust system. Verify the correct attachment method and any required mounting hardware before installation.

Maintain adequate clearance between the exhaust tip and surrounding bodywork to help prevent heat-related damage.

What's Included

• (1) MBRP Universal Carbon Fiber Exhaust Tip (T5184CF)

• Dual-Wall, Angle-Cut Exhaust Tip Assembly

• Carbon Fiber Outer Wall with Mirror-Polished T304 Stainless Steel Inner Sleeve

Note: Exhaust piping, mufflers, catalytic converters, additional exhaust tips, and custom fabrication components are not included. Confirm any required mounting hardware before installation.

Enhance your vehicle's exhaust system with the MBRP Universal Carbon Fiber Exhaust Tip (T5184CF) for premium motorsport-inspired styling, durable construction, and an aggressive dual-wall angle-cut design.

Featuring a 3-inch inlet, 5-inch outlet, 6.13-inch overall length, genuine carbon fiber exterior, and mirror-polished T304 stainless steel inner construction, this universal exhaust tip provides an excellent finishing touch for compatible performance exhaust systems.

Whether upgrading a Honda or Acura performance build, completing a custom K-Series exhaust, or refreshing the appearance of an existing aftermarket exhaust system, MBRP delivers a premium carbon fiber exhaust accessory designed to complement your vehicle's performance-focused styling.