Images may be for reference only
Product Details
The MBRP Universal Carbon Fiber Dual Outlet Exhaust Tip (T5182CF) is a premium exhaust finishing accessory designed to give compatible performance exhaust systems an aggressive, motorsport-inspired appearance. Combining genuine carbon fiber outer sleeves with mirror-polished T304 stainless steel inner construction, this universal exhaust tip delivers distinctive styling and premium materials for custom exhaust applications.
Unlike conventional single-outlet exhaust tips, the MBRP T5182CF features two 4-inch exhaust outlets connected to a single 3-inch inlet. This design creates the appearance of a dual-exit exhaust system while utilizing one compatible tailpipe connection, making it an excellent option for custom exhaust fabrication and aftermarket exhaust upgrades.
The carbon fiber outer sleeves provide a high-performance appearance commonly associated with motorsport applications and premium aftermarket exhaust systems. Their distinctive woven finish complements carbon fiber rear diffusers, spoilers, aerodynamic components, and other exterior modifications.
Inside each carbon fiber sleeve, mirror-polished T304 stainless steel provides a contrasting metallic finish and durable exhaust-facing construction. This combination of materials creates a premium dual-wall appearance that stands apart from traditional single-wall stainless steel exhaust tips.
One of the defining features of the T5182CF is its staggered dual-outlet design. The offset exhaust openings create a more dynamic appearance than equal-length exhaust tips and can complement the contours of certain rear bumpers and diffusers.
The T5182CF is configured for passenger-side applications and serves as the matching counterpart to the MBRP T5183CF driver-side carbon fiber dual outlet exhaust tip. When installed together on a properly configured custom exhaust system, these components create a coordinated four-tip appearance with two outlets on each side of the vehicle.
Each 4-inch outlet features a dual-wall, angle-cut design that creates a substantial exhaust profile. The combination of carbon fiber, polished stainless steel, and staggered positioning delivers a distinctive appearance suitable for street performance vehicles, custom builds, and show applications.
Designed as a universal exhaust accessory, the MBRP T5182CF can be incorporated into compatible 3-inch exhaust systems when the mounting configuration, exhaust routing, and available clearance permit.
Whether completing a custom Honda or Acura exhaust build, upgrading an aftermarket performance exhaust, or creating a coordinated dual-side exhaust configuration, the MBRP T5182CF provides premium styling and construction for enthusiasts seeking a distinctive exhaust finishing component.
Features
Genuine Carbon Fiber Outer Sleeves: Provides premium motorsport-inspired styling with a distinctive woven appearance.
T304 Stainless Steel Inner Construction: Offers durable exhaust-facing components with excellent corrosion resistance.
Mirror-Polished Stainless Steel Interior: Creates an attractive metallic contrast against the carbon fiber exterior.
Dual 4-Inch Exhaust Outlets: Features two large round exhaust openings for an aggressive dual-exit appearance.
Single 3-Inch Inlet: Designed for compatible exhaust systems utilizing a 3-inch tailpipe connection.
Staggered Outlet Configuration: Offset outlet lengths create a distinctive performance-oriented appearance.
Dual-Wall Construction: Combines carbon fiber outer sleeves with polished stainless steel inner components.
Aggressive Angle-Cut Openings: Provides a sporty finishing detail that complements performance-oriented exterior styling.
Passenger-Side Configuration: Designed to complement compatible passenger-side exhaust installations.
Matching Driver-Side Option: Pairs with MBRP T5183CF for coordinated dual-side exhaust applications.
Premium Carbon Fiber Finish: Complements aftermarket rear diffusers, carbon fiber aerodynamic accessories, and custom exterior modifications.
Corrosion-Resistant Inner Material: T304 stainless steel helps resist deterioration from normal exhaust exposure.
Universal Application: Suitable for appropriately configured exhaust systems across multiple vehicle makes and models.
Custom Exhaust Compatibility: Can be incorporated into fabricated exhaust systems with suitable connections and clearance.
Distinctive Dual-Outlet Styling: Creates a dual-tip appearance from one compatible exhaust tailpipe.
Performance Vehicle Applications: Complements turbocharged builds, modified street cars, and custom performance vehicles.
Single Assembly Packaging: Sold individually as one dual-outlet exhaust tip assembly.
MBRP Performance Styling: Designed to complement premium aftermarket exhaust systems and performance-oriented builds.
Popular Performance Applications
Honda Civic Performance Builds: Adds premium carbon fiber dual-outlet styling to compatible custom exhaust systems.
Acura Integra Performance Builds: Provides an aggressive finishing option for properly configured aftermarket exhaust applications.
Honda Civic Type R Custom Exhaust Systems: Suitable for custom fabrication when the 3-inch inlet, dual outlets, and available clearance permit.
Honda S2000 Performance Builds: Complements custom exhaust systems with compatible tailpipe dimensions and rear bumper clearance.
Honda Accord Performance Builds: Adds a distinctive dual-outlet appearance to fabricated exhaust configurations.
K-Series Engine Swaps: Suitable for custom K20 and K24 exhaust systems utilizing compatible 3-inch tailpipe connections.
B-Series Turbocharged Builds: Provides a premium finishing component for custom high-performance exhaust systems.
Turbocharged Honda and Acura Applications: Complements properly fabricated performance exhaust configurations.
Custom Cat-Back Exhaust Systems: Provides a carbon fiber dual-outlet finishing component for modified or fabricated exhaust assemblies.
Aftermarket Axle-Back Exhaust Systems: Suitable for custom exhaust applications requiring a staggered dual-tip arrangement.
Custom Dual-Side Exhaust Builds: Can be paired with MBRP T5183CF for coordinated passenger-side and driver-side exhaust outlets.
Street and Show Vehicles: Enhances rear-end styling with genuine carbon fiber and polished stainless steel construction.
Important: These are potential custom applications rather than confirmed direct-fit vehicle applications. Proper compatibility depends on exhaust pipe dimensions, outlet orientation, bumper clearance, and installation requirements.
Additional Information
- Manufacturer: MBRP
- Part Number: T5182CF
- Product Type: Universal Dual Outlet Exhaust Tip
- Outer Material: Genuine Carbon Fiber
- Inner Material: T304 Stainless Steel
- Finish: Carbon Fiber with Mirror-Polished Stainless Steel Interior
- Exhaust Tip Style: Dual-Wall, Angle-Cut, Staggered
- Tip Shape: Round
- Inlet Diameter: 3 Inches
- Outlet Diameter: Dual 4-Inch Outlets
- Outlet Configuration: Two Exhaust Outlets from One Inlet
- Typical Mounting Position: Passenger Side
- Matching Driver-Side Part Number: MBRP T5183CF
- Vehicle Fitment: Universal, Based on Exhaust Pipe Dimensions and Available Clearance
- Quantity: Sold Individually as One Dual-Outlet Assembly
- Manufacturer Warranty: Verify Current MBRP Warranty Terms
Fitment Information
The MBRP T5182CF is a universal exhaust tip rather than a vehicle-specific replacement component. Compatibility depends on the dimensions and configuration of the existing exhaust system.
Before ordering, verify the following:
Exhaust Tip Inlet Diameter: 3 inches.
Exhaust Tip Outlet Diameter: Two 4-inch outlets.
Exhaust Pipe Compatibility: Requires a compatible 3-inch tailpipe connection.
Rear Bumper Clearance: Confirm sufficient room for both 4-inch exhaust outlets.
Exhaust Tip Orientation: Verify that the passenger-side staggered configuration matches the intended installation.
Installation Space: Confirm adequate clearance from the bumper, rear diffuser, suspension, and surrounding components.
Mounting Requirements: Verify the manufacturer's specified attachment method and any additional hardware required.
Custom Fabrication: Additional exhaust piping, brackets, or bumper modifications may be necessary depending on the application.
Passenger-Side and Driver-Side Compatibility
The MBRP T5182CF is the passenger-side configuration.
For a matching driver-side appearance, use the MBRP T5183CF, sold separately.
These two components can be used together on compatible custom exhaust systems featuring exhaust outlets on both sides of the vehicle. Each assembly features two outlets, allowing a coordinated four-tip arrangement when both sides are installed.
Material and Finish Information
The genuine carbon fiber exterior provides a premium performance appearance, while the polished T304 stainless steel inner construction offers durable exhaust-facing surfaces.
Clean the carbon fiber using mild automotive cleaning products and a soft microfiber cloth. Avoid abrasive polishing compounds, harsh chemicals, and cleaning methods that could damage the carbon fiber finish.
Performance Information
The MBRP T5182CF is primarily an appearance upgrade.
Although the assembly features two exhaust outlets, it uses a single 3-inch inlet and does not independently convert a vehicle into a true dual-exhaust system.
Installing an exhaust tip alone should not be expected to produce measurable horsepower or torque gains or significantly change exhaust sound.
Common Reasons for Replacement
Factory Exhaust Appearance: Replaces a conventional exhaust outlet with aggressive carbon fiber dual-tip styling.
Performance Exhaust Customization: Adds a premium finishing detail to compatible aftermarket exhaust systems.
Dual-Outlet Appearance: Creates the appearance of two exhaust outlets from one compatible tailpipe connection.
Carbon Fiber Styling Upgrades: Complements carbon fiber rear diffusers, spoilers, and exterior accessories.
Damaged Exhaust Tips: Replaces worn, scratched, dented, or otherwise damaged exhaust outlets.
Custom Exhaust Fabrication: Provides a premium finishing option for fabricated performance exhaust systems.
Staggered Exhaust Styling: Offers a distinctive offset arrangement compared to equal-length exhaust tips.
Passenger-Side Exhaust Upgrades: Provides a matching passenger-side option for compatible dual-side exhaust layouts.
Premium Material Construction: Combines genuine carbon fiber styling with durable T304 stainless steel inner components.
Aggressive Rear-End Appearance: Dual 4-inch outlets create a prominent performance-oriented appearance.
Street and Show Builds: Complements modified vehicles featuring aftermarket bumpers, rear diffusers, and custom exhaust systems.
Installation Notes
Verify Exhaust Pipe Diameter: Confirm compatibility with the exhaust tip's 3-inch inlet.
Measure Available Clearance: Ensure sufficient room for both 4-inch outlets and the complete staggered assembly.
Confirm Installation Position: Verify that the passenger-side configuration is appropriate for the intended exhaust layout.
Allow the Exhaust to Cool: Make sure all exhaust components have cooled before beginning installation.
Safely Support the Vehicle: Park on a level surface and use appropriate lifting equipment if additional access is required.
Inspect the Existing Exhaust: Check the tailpipe for corrosion, damage, and incompatible mounting features.
Remove the Existing Exhaust Tip: Remove the original tip if necessary using the appropriate procedure.
Clean the Exhaust Connection: Remove accumulated dirt, corrosion, and debris from the connection area.
Test-Fit the MBRP Assembly: Position the exhaust tip over the compatible tailpipe connection.
Check Staggered Orientation: Align the outlets to achieve the desired appearance and correct passenger-side positioning.
Verify Bumper Clearance: Confirm adequate distance between the carbon fiber sleeves and surrounding bodywork.
Identify the Mounting Method: Verify the intended attachment configuration and any necessary hardware.
Secure the Exhaust Tip: Install using the manufacturer's recommended attachment procedure.
Check Outlet Alignment: Confirm both exhaust outlets are positioned correctly relative to the bumper opening.
Inspect Nearby Components: Check clearance from heat shields, plastic trim, rear diffusers, suspension components, and wiring.
Confirm Installation Security: Ensure the assembly is firmly attached and cannot rotate or move during operation.
Inspect After Initial Operation: Recheck attachment security and clearances after several exhaust heating and cooling cycles.
Maintain the Carbon Fiber Finish: Clean using mild automotive products and a soft microfiber cloth.
Check Matching Driver-Side Alignment: If installing the T5183CF, verify consistent positioning and visual balance between both sides.
Professional Installation Recommended: Custom exhaust applications may require fabrication or professional assistance.
Important: Universal exhaust tips are not guaranteed to attach directly to every exhaust system with the same nominal pipe diameter. Confirm the attachment method, pipe dimensions, and available clearance before installation.
What's Included
(1) MBRP Universal Carbon Fiber Dual Outlet Exhaust Tip Assembly (T5182CF)
(2) Integrated 4-Inch Carbon Fiber Dual-Wall Angle-Cut Exhaust Outlets
(1) Integrated 3-Inch Inlet Connection
Note: The matching MBRP T5183CF driver-side exhaust tip is sold separately. Exhaust piping, mufflers, catalytic converters, additional exhaust tips, and custom fabrication components are not included. Confirm any required installation hardware before ordering.
Enhance your vehicle's exhaust system with the MBRP Universal Carbon Fiber Dual Outlet Exhaust Tip (T5182CF) for aggressive motorsport-inspired styling, premium materials, and a distinctive staggered dual-wall angle-cut design.
Featuring a 3-inch inlet, dual 4-inch outlets, genuine carbon fiber outer sleeves, and mirror-polished T304 stainless steel inner construction, this passenger-side exhaust tip provides a premium finishing touch for compatible performance exhaust systems.
| Part Number: | T5182CF |
| Brand: | MBRP |
| Color: | Carbon Fiber |
| Size: | 3.00 in (76 mm) |
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
This part does not have vehicle specific fitment. Please contact us if you need assistance.
Reviews
No Reviews Yet!
Write a Review