Product Details
Restore proper emissions-system operation on your Acura RDX with the MagnaFlow OEM Grade Federal/EPA-Compliant Direct-Fit Catalytic Converter (51529). Designed specifically for the 2007–2012 Acura RDX equipped with the 2.3L turbocharged K23A1 engine, this premium replacement catalytic converter combines durable stainless steel construction, factory-style fitment, and Federal/EPA emissions compliance.
Part of MagnaFlow's OEM Grade catalytic converter series, the 51529 is engineered to replace a worn, damaged, or inefficient factory catalytic converter while maintaining the vehicle's original exhaust routing and emissions-system functionality.
Unlike universal catalytic converters that may require cutting, welding, or custom fabrication, this direct-fit assembly is designed to install using the factory exhaust connection points. Its vehicle-specific construction helps simplify installation while preserving the original exhaust system's geometry.
The MagnaFlow 51529 features 16-gauge 409 stainless steel tubing, a stainless steel spun-body converter housing, and a ceramic catalyst substrate designed to support proper exhaust emissions treatment.
Precision mandrel-bent tubing helps maintain smooth exhaust flow through the system, while the converter's compact, low-mass design supports efficient heat retention and catalytic converter operation.
MagnaFlow uses advanced 3D scanning technology during product development to reproduce original equipment dimensions and exhaust connection locations. This helps ensure proper alignment with the factory exhaust system and surrounding underbody components.
The converter also features corrosion-resistant 410 stainless steel exhaust hangers, durable 308 stainless steel MIG welds, and laser fusion-welded construction designed to reduce the potential for exhaust leaks.
With the supplied crush ring gasket and mounting hardware, the MagnaFlow 51529 offers a convenient solution for replacing a deteriorated factory catalytic converter without requiring additional fabrication under normal installation conditions.
Whether you're repairing an exhaust leak, replacing a failed catalytic converter, or restoring the emissions system on a high-mileage turbocharged Acura RDX, the MagnaFlow 51529 provides a dependable OEM-style replacement solution.
Important Emissions Notice: This catalytic converter is Federal/EPA compliant but is not CARB certified. It is not legal for sale or installation in California, Colorado, or New York. Always verify local emissions requirements before ordering.
Features
OEM Grade Direct-Fit Catalytic Converter: Engineered specifically for 2007–2012 Acura RDX 2.3L Turbo applications.
Federal/EPA-Compliant Design: Meets applicable federal replacement catalytic converter requirements.
Vehicle-Specific Fitment: Designed to replace the original catalytic converter without custom fabrication.
Stainless Steel Construction: Provides durability and corrosion resistance.
16-Gauge 409 Stainless Steel Tubing: High-strength tubing designed for demanding exhaust conditions.
Ceramic Catalyst Substrate: Supports proper exhaust emissions treatment.
Spun-Body Converter Design: Compact construction designed for thermal efficiency.
Mandrel-Bent Exhaust Tubing: Maintains smooth exhaust routing and OEM-like flow characteristics.
Precision 3D-Scanned Design: Developed to reproduce original equipment dimensions and mounting geometry.
Laser Fusion-Welded Construction: Helps reduce the potential for exhaust leakage.
308 Stainless Steel MIG Welds: Provides durable, corrosion-resistant welded connections.
410 Stainless Steel Exhaust Hangers: Designed to maintain factory-style mounting and reduce unwanted vibration.
Factory-Style Flanged Connections: Supports direct installation with compatible original exhaust components.
2.5-Inch Inlet and Outlet Diameter: Maintains the manufacturer-specified exhaust connection dimensions.
27.875-Inch Overall Length: Vehicle-specific assembly dimensions.
No Oxygen Sensor Ports: Manufacturer specifies zero integrated oxygen sensor ports.
Replacement Crush Ring Gasket Included: Provides a new exhaust connection seal.
Mounting Hardware Included: Includes bolts, nuts, and flat washers.
Bolt-On Installation: Designed for installation without cutting or welding under normal conditions.
OEM-Style Exhaust Flow: Engineered to maintain factory-like engine performance and fuel efficiency.
Sold Individually: One complete catalytic converter assembly per purchase.
Popular Performance Applications
Although the MagnaFlow 51529 is primarily an OEM-style emissions replacement rather than a racing catalytic converter, it is well suited for Acura RDX maintenance and restoration projects.
2007–2012 Acura RDX Catalytic Converter Replacement
K23A1 Turbocharged Engine Maintenance
First-Generation Acura RDX Restoration
Factory Emissions System Repairs
Federal/EPA-Compliant Exhaust Repairs
High-Mileage Acura RDX Maintenance
Catalytic Converter Efficiency Repairs
OEM-Style Exhaust Restoration
Exhaust Leak Repairs
Daily Driver Emissions Maintenance
Factory Turbocharged Exhaust System Repairs
Original Equipment Catalytic Converter Replacement
Additional Information
- Manufacturer: MagnaFlow
- Manufacturer Part Number: 51529
- Product Series: OEM Grade
- Product Type: Federal/EPA-Compliant Direct-Fit Catalytic Converter
- Vehicle Application: 2007–2012 Acura RDX 2.3L Turbo
- Vehicle Generation: First-Generation Acura RDX
- Engine Family: Honda K-Series
- Engine Code: K23A1
- Engine Displacement: 2.3L
- Catalytic Converter Location: Rear
- Catalytic Converter Configuration: Direct-Fit
- Catalytic Converter Body Style: Spun
- Body Material: Stainless Steel
- Tubing Material: Stainless Steel
- Tubing Construction: 16-Gauge 409 Stainless Steel
- Exhaust Hanger Material: 410 Stainless Steel
- Weld Material: 308 Stainless Steel
- Catalyst Substrate Material: Ceramic
- Exterior Finish: Stainless Steel
- Inlet Connection: Flange
- Outlet Connection: Flange
- Inlet Diameter: 2.5 Inches
- Outlet Diameter: 2.5 Inches
- Overall Length: 27.875 Inches
- Converter Body Length: 9 Inches
- Converter Body Width: 4.25 Inches
- Oxygen Sensor Port Count: 0
- Air Tube Count: 0
- Air Tube Adaptable: No
- Heat Shield Attached: No
- Exhaust Hangers Included: Yes
- Exhaust Clamps Included: No
- Inlet Gasket Included: No
- Outlet Gasket Included: Yes
- Inlet Mounting Hardware Included: No
- Outlet Mounting Hardware Included: Yes
- California Air Resources Board (CARB) Certified: No
- New York Certified: No
- Federal/EPA Compliant: Yes, for Eligible Applications
- CARB Executive Order: Not Applicable
- Installation Type: Direct-Fit / Bolt-On
- Cutting Required: No, Under Normal Installation Conditions
- Welding Required: No, Under Normal Installation Conditions
- OEM Interchange Part Numbers: 18160-RWC-A00, 18160-RWC-A10
- UPC: 888563002279
- Quantity: One Catalytic Converter Assembly
OEM Grade Federal/EPA Emissions Design
The MagnaFlow 51529 is engineered to meet applicable Federal/EPA emissions requirements for eligible replacement catalytic converter applications.
Its OEM Grade construction is designed to maintain factory-like exhaust operation and emissions treatment while providing a replacement for a deteriorated original catalytic converter.
The converter utilizes a ceramic catalyst substrate to support the chemical reactions required to reduce harmful exhaust pollutants.
Benefits of Federal/EPA-Compliant Construction
Designed to meet applicable federal replacement converter requirements
Supports proper exhaust emissions treatment
Maintains factory-style exhaust routing
Designed for original emissions-system functionality
Vehicle-specific replacement configuration
Suitable for eligible vehicles in jurisdictions permitting Federal/EPA converters
Important: Federal/EPA compliance is not the same as CARB certification. The MagnaFlow 51529 is not approved for sale or installation in California, Colorado, or New York.
Stainless Steel Construction
The MagnaFlow 51529 features durable stainless steel construction designed to withstand high exhaust temperatures and demanding road conditions.
The converter incorporates 16-gauge 409 stainless steel tubing, 308 stainless steel MIG welds, and corrosion-resistant 410 stainless steel exhaust hangers.
These materials provide strength and corrosion resistance for long-term exhaust-system service.
Construction advantages include:
Durable stainless steel converter housing
High-strength 409 stainless steel tubing
Corrosion-resistant welded connections
High-temperature durability
Factory-style exhaust hangers
Precision-manufactured exhaust connections
OEM-style exhaust routing
This construction makes the converter suitable for daily-driven Acura RDX applications where durability and reliable emissions-system operation are priorities.
Ceramic Catalyst Substrate
The MagnaFlow 51529 uses a ceramic catalyst substrate designed to support exhaust emissions treatment.
During normal engine operation, the catalytic converter helps reduce harmful exhaust pollutants through chemical reactions within the catalyst.
The primary pollutants treated include:
Hydrocarbons (HC): Unburned fuel compounds in the exhaust stream.
Carbon Monoxide (CO): A harmful gas produced during combustion.
Nitrogen Oxides (NOx): Pollutants formed during high-temperature combustion.
The ceramic substrate provides a large internal surface area for the catalytic reactions required for emissions treatment.
Proper converter operation depends on the engine's air-fuel mixture, ignition system, oxygen sensors, turbocharger condition, and overall mechanical health.
Precision 3D-Scanned Direct-Fit Design
MagnaFlow uses advanced 3D scanning technology during product development to replicate original equipment exhaust dimensions.
This process helps ensure the converter aligns correctly with the Acura RDX's factory exhaust system.
Direct-fit advantages include:
Factory-style exhaust connection locations
Correct overall exhaust routing
OEM-like mounting geometry
Reduced installation complexity
No custom fabrication under normal conditions
Proper alignment with compatible exhaust components
The converter is designed to replace the original catalytic converter without requiring permanent modifications to a compatible factory exhaust system.
Mandrel-Bent Stainless Steel Tubing
The MagnaFlow 51529 features mandrel-bent stainless steel exhaust tubing.
Mandrel bending helps maintain a consistent internal pipe diameter through bends, reducing the restrictions associated with conventional crush-bent tubing.
This construction supports smooth exhaust routing while preserving the dimensions required for direct-fit installation.
Benefits include:
Consistent tubing geometry
Smooth exhaust flow
Factory-style routing
Reduced unnecessary flow restriction
Precision fitment
Durable stainless steel construction
The system is engineered to maintain OEM-like exhaust flow characteristics rather than provide a racing-specific exhaust configuration.
Factory-Style Exhaust Hangers
The MagnaFlow 51529 includes OE-sized barbed exhaust hangers manufactured from corrosion-resistant 410 stainless steel.
These hangers are designed to support the converter assembly using the vehicle's factory-style mounting arrangement.
Proper exhaust mounting helps reduce unnecessary movement, vibration, and contact with surrounding underbody components.
Benefits include:
Factory-style exhaust support
Corrosion-resistant hanger construction
Reduced unwanted exhaust movement
Improved mounting stability
Proper alignment with the original exhaust system
Common Reasons for Replacement
Catalytic Converter Efficiency Codes: A diagnostic trouble code such as P0420 may indicate insufficient catalyst efficiency, although other causes must be ruled out.
Failed Emissions Inspection: A deteriorated catalytic converter may prevent the vehicle from meeting applicable emissions requirements.
Damaged Catalyst Substrate: Internal ceramic material can deteriorate, fracture, or become contaminated.
Restricted Exhaust Flow: A severely damaged converter may create excessive exhaust backpressure.
Exhaust Leaks: Corrosion or damaged connections can allow exhaust gases to escape.
Catalytic Converter Rattling: Loose internal substrate material may produce metallic noises.
High-Mileage Vehicle Maintenance: Aging emissions components may require replacement.
Corroded Exhaust Connections: Damaged flanges or sealing surfaces can compromise exhaust integrity.
Previous Converter Failure: An improperly functioning replacement converter may require correction.
Emissions System Restoration: Replacing a failed converter can help restore proper exhaust emissions treatment.
Diagnostic Note: A P0420 code does not automatically mean the catalytic converter has failed. Exhaust leaks, malfunctioning oxygen sensors, misfires, fuel mixture problems, and other engine issues should be diagnosed before replacing the converter.
Installation Notes
Verify Vehicle Fitment: Confirm the vehicle is a compatible 2007–2012 Acura RDX equipped with the 2.3L turbocharged engine.
Verify Emissions Legality: Confirm that a Federal/EPA-compliant converter is permitted for the vehicle and registration jurisdiction.
Diagnose the Original Failure: Identify and correct engine or emissions problems that contributed to catalytic converter deterioration.
Allow the Exhaust to Cool: Never work on hot exhaust components.
Raise and Support the Vehicle Safely: Use an appropriate vehicle lift or properly rated jack stands.
Inspect the Existing Exhaust: Check the original catalytic converter, flanges, hangers, and adjacent piping for damage.
Remove the Original Converter: Carefully disconnect the factory exhaust hardware and remove the existing assembly.
Compare the Replacement Assembly: Verify the MagnaFlow converter matches the original exhaust configuration.
Inspect Factory Exhaust Connections: Check the mating flanges and sealing surfaces for corrosion or distortion.
Install the Supplied Gasket: Position the new crush ring gasket at the appropriate outlet connection.
Position the Replacement Converter: Align the converter with the factory exhaust components.
Install Mounting Hardware: Use the supplied hardware at the designated connection points.
Inspect Exhaust Hangers: Ensure the converter is correctly supported by the vehicle's mounting system.
Tighten Exhaust Connections: Follow the applicable manufacturer and vehicle service specifications.
Check Exhaust Clearance: Verify adequate clearance from the underbody, drivetrain, fuel system, and heat-sensitive components.
Inspect for Exhaust Leaks: Start the engine and check the exhaust connections for leakage.
Verify Engine Operation: Confirm the engine runs properly and monitor for diagnostic trouble codes.
Perform a Road Test: Check for unusual exhaust noise, rattling, or vibration.
Complete Required Emissions Procedures: Follow applicable inspection and emissions verification requirements.
Reinspect After Initial Operation: Check exhaust connections and mounting hardware after the system has cooled.
Installation Recommendation: Professional installation is recommended, particularly for vehicles with heavily corroded exhaust components or unresolved emissions-system problems.
What's Included
The MagnaFlow 51529 includes the following manufacturer-listed components:
(1) MagnaFlow OEM Grade Federal/EPA Direct-Fit Catalytic Converter – 51529
(1) Crush Ring Gasket
(3) Flat Washers
(3) Bolts
(3) Nuts
Not Included:
Oxygen Sensors
Inlet Gasket
Inlet Mounting Hardware
Exhaust Clamps
Additional Exhaust Pipes
Exhaust Manifold
Turbocharger
Muffler
Additional Replacement Hardware Beyond the Supplied Components
Quantity Note: One catalytic converter assembly is included per purchase.
Restore emissions-system performance on your 2007–2012 Acura RDX with the MagnaFlow OEM Grade Federal/EPA-Compliant Direct-Fit Catalytic Converter (51529).
Featuring durable stainless steel construction, 16-gauge 409 stainless steel tubing, a ceramic catalyst substrate, precision mandrel-bent exhaust routing, factory-style flanged connections, and integrated stainless steel exhaust hangers, this converter offers a dependable solution for replacing a failed original catalytic converter.
With vehicle-specific fitment, included installation hardware, and Federal/EPA emissions compliance, the MagnaFlow 51529 provides an OEM-style replacement solution for eligible K23A1-powered Acura RDX applications.
Important: This catalytic converter is not CARB certified and is not legal for sale or installation in California, Colorado, or New York. Verify all applicable emissions requirements before ordering.
| Part Number: | 51529 |
| Brand: | Magnaflow |
| CARB Approved: | No |
Not legal for sale or use in California on any pollution controlled motor vehicles. See http://www.semasan.com/emissions for state by state emissions requirements.
There is a 5% cancellation fee if you order this product and want to ship it to the state of California.
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
| Year | Make | Model | Trim |
|---|---|---|---|
| 2007 | Acura | RDX | Base |
| 2008 | Acura | RDX | Base |
| 2009 | Acura | RDX | Base |
Engine Fitment
| Engine |
|---|
| Honda 2.3L/2300CC - 4 Cylinder (K23A1) |
Reviews
No Reviews Yet!
Write a Review