Log In Cart
Log In

Create An Account

Log In Cart
Your Cart Is Empty

MagnaFlow 02-06 Honda CRV 2.4L BRExhaust Kit
Part Number: 106-0722

Images may be for reference only

MagnaFlow 02-06 Honda CRV 2.4L BRExhaust Kit
Part Number: 106-0722

Be the first to review!
$476.00 & Free Shipping

Earn 952 Builders Club Points. Learn More

Make Sure It Fits

1 In Stock
Ask a Question

Product Details

Restore the exhaust system on your second-generation Honda CR-V with the MagnaFlow BRExhaust Direct-Fit Replacement Exhaust System (106-0722). Designed specifically for the 2002–2006 Honda CR-V equipped with the 2.4L K-series engine, this complete replacement exhaust kit provides a convenient, durable, and cost-effective alternative to worn or damaged factory exhaust components.

Part of the BRExhaust Direct-Fit Replacement series, the 106-0722 is engineered to simplify exhaust repairs by combining the required replacement pipes, muffler assemblies, gaskets, clamps, and mounting hardware into one vehicle-specific package.

Rather than purchasing individual exhaust sections and attempting to adapt universal components, this kit provides a coordinated replacement system designed around the factory exhaust routing and mounting locations.

The system features mandrel-bent aluminized steel piping, offering consistent bends and a durable, corrosion-resistant finish. Unlike conventional crush-bent exhaust tubing, mandrel bending helps maintain a more consistent internal pipe diameter through curved sections, promoting smooth exhaust flow.

Its multi-piece, bolt-on construction makes installation more manageable around the CR-V's underbody components, including suspension crossmembers, drivetrain components, and factory mounting brackets.

Designed to replace the exhaust components downstream of the catalytic converter, the system retains the vehicle's existing emissions equipment and uses an OEM-style exhaust exit location.

Whether your CR-V has developed a rusted muffler, leaking exhaust pipes, damaged flanges, or excessive exhaust noise, the MagnaFlow BRExhaust 106-0722 provides a comprehensive repair solution without requiring custom fabrication or welding under normal installation conditions.

Features

  • Direct-Fit Replacement Exhaust System: Engineered specifically for the 2002–2006 Honda CR-V 2.4L.

  • Complete Exhaust Repair Kit: Includes the replacement exhaust assemblies and specified installation hardware.

  • Mandrel-Bent Exhaust Tubing: Maintains more consistent internal dimensions through bends compared with typical crush-bent tubing.

  • Aluminized Steel Construction: Provides durability and corrosion resistance for everyday driving.

  • Multi-Piece Bolt-On Design: Allows the system to be assembled and installed around underbody components.

  • No Welding Required: Designed for installation without fabrication when factory mounting points are intact.

  • OEM-Style Exhaust Routing: Follows the vehicle's original exhaust configuration.

  • Factory Exhaust Exit Location: Maintains an OEM-style tailpipe position.

  • Two-Muffler Configuration: Includes front and rear muffler sections as specified by the manufacturer.

  • 2.5-Inch Main Piping Diameter: Manufacturer-listed main piping specification.

  • Replacement Gaskets Included: Provides sealing components for the specified exhaust connections.

  • Exhaust Clamps Included: Supplies the clamps required for the kit's connections.

  • Spring Bolt Hardware Included: Includes the specified spring bolt installation kit.

  • Mounting Hardware Included: Reduces the need to source individual installation fasteners.

  • Factory Emissions Equipment Retained: Does not require removal or modification of the catalytic converter.

  • DIY-Friendly Design: Suitable for experienced home mechanics with appropriate tools and lifting equipment.

  • Two-Year Warranty: Backed by the manufacturer's two-year, unlimited-mileage warranty, subject to its terms.

  • Vehicle-Specific Engineering: Designed for proper exhaust routing, mounting, and fitment on compatible CR-V models.

Popular Performance Applications

Although the MagnaFlow BRExhaust 106-0722 is primarily an OEM-style replacement system rather than a dedicated performance exhaust, it is suitable for several common Honda CR-V maintenance and restoration applications.

  • 2002–2006 Honda CR-V Exhaust System Restoration

  • K24A1-Powered CR-V Maintenance

  • Daily Driver Exhaust Repairs

  • High-Mileage Honda CR-V Restoration

  • Rusted Muffler Replacement

  • Corroded Exhaust Pipe Replacement

  • Factory Exhaust Leak Repairs

  • OEM-Style Exhaust System Refresh

  • Stock Engine and Exhaust Configurations

  • Street-Driven Honda CR-V Builds

  • Factory Exhaust Routing Restoration

Additional Information

  • Manufacturer: MagnaFlow
  • Product Brand: BRExhaust
  • Manufacturer Part Number: 106-0722
  • Product Series: BRExhaust Direct-Fit Replacement
  • Product Type: Complete Direct-Fit Replacement Exhaust System
  • Vehicle Application: 2002–2006 Honda CR-V 2.4L
  • Engine Family: Honda K-Series
  • Engine Code: K24A1 (North American Applications)
  • Exhaust Configuration: Multi-Piece Bolt-On Replacement System
  • Main Piping Diameter: 2.5 Inches
  • Pipe Material: Aluminized Steel
  • Muffler Body Material: Aluminized Steel
  • Muffler Finish: Aluminized
  • Overall Finish: Satin
  • Muffler Quantity: 2
  • Front Muffler Body Length: 19.5 Inches
  • Front Muffler Body Height: 3.5 Inches
  • Front Muffler Body Width: 3.5 Inches
  • Rear Muffler Body Length: 15.5 Inches
  • Rear Muffler Body Height: 7 Inches
  • Rear Muffler Body Width: 7 Inches
  • Exhaust Tip Quantity: 1
  • Exhaust Exit Style: OEM Location
  • Inlet Type: Clamp-On
  • Clamping Type: U-Bolt
  • Exhaust Hangers Included: Yes
  • Gaskets Included: Yes
  • Clamps Included: Yes
  • Spring Bolt Kit Included: Yes
  • Installation Hardware Included: Yes
  • Catalytic Converter Included: No
  • Welding Required: No, Under Normal Installation Conditions
  • Vehicle-Specific Fitment: Yes
  • Warranty: Two Years, Unlimited Mileage, Subject to Manufacturer Terms
  • UPC: 888563180861
  • Quantity: One Complete Exhaust System Kit

Mandrel-Bent Aluminized Steel Construction

The MagnaFlow BRExhaust 106-0722 features precision mandrel-bent aluminized steel tubing.

Mandrel bending helps maintain a consistent internal pipe diameter through bends, reducing the restrictions that can occur with conventional crush-bent exhaust tubing.

This construction provides an efficient exhaust path while maintaining the factory-style routing required for direct-fit installation.

The aluminized steel material features a protective aluminum-based surface coating designed to improve resistance to corrosion and oxidation.

Construction advantages include:

  • Durable aluminized steel piping

  • Corrosion-resistant protective coating

  • Consistent pipe bends

  • Smooth exhaust routing

  • OEM-style installation geometry

  • Suitable durability for daily-driven vehicles

Material Note: This kit is constructed from aluminized steel, not stainless steel. Its corrosion resistance and expected service life will depend on operating conditions, road salt exposure, moisture, and maintenance.

Complete Multi-Piece Bolt-On Exhaust Design

One of the primary advantages of the BRExhaust 106-0722 is its multi-piece construction.

Rather than requiring installation of a large, single-piece exhaust assembly, the system is divided into sections that can be positioned around the vehicle's underbody components.

This approach simplifies installation and allows the individual sections to be aligned before the clamps and mounting hardware are fully tightened.

Benefits include:

  • Easier handling during installation

  • Improved access around underbody obstacles

  • Adjustable positioning before final tightening

  • No custom pipe bending required

  • No welding required under normal conditions

  • Reduced need to source individual replacement components

The system is engineered to use the vehicle's original exhaust mounting arrangement.

OEM-Style Exhaust Routing and Sound

The MagnaFlow BRExhaust 106-0722 is designed as a replacement for the original exhaust system.

Its primary purpose is to restore proper exhaust function, sealing, routing, and noise control.

Unlike a dedicated performance exhaust designed to produce a significantly louder exhaust note, this system is intended to provide an OEM-style replacement solution.

Replacing a damaged or leaking exhaust system can help eliminate:

  • Excessive exhaust noise

  • Exhaust leaks

  • Metallic rattling

  • Loose or damaged exhaust sections

  • Exhaust fumes escaping from compromised connections

  • Vibration caused by damaged exhaust components

Actual exhaust sound depends on the vehicle's condition, catalytic converter, engine operation, and other exhaust components.

Two-Muffler Exhaust Configuration

The manufacturer specifies a two-muffler configuration for the 106-0722 exhaust system.

The front and rear muffler assemblies are designed to work together as part of the complete replacement exhaust.

Front Muffler

  • Body Length: 19.5 Inches

  • Body Height: 3.5 Inches

  • Body Width: 3.5 Inches

  • Material: Aluminized Steel

Rear Muffler

  • Body Length: 15.5 Inches

  • Body Height: 7 Inches

  • Body Width: 7 Inches

  • Material: Aluminized Steel

This arrangement provides an OEM-style exhaust replacement intended to restore the vehicle's original exhaust system function.

Factory Emissions Equipment Compatibility

The BRExhaust 106-0722 is designed to replace the exhaust components downstream of the vehicle's catalytic converter.

The kit does not include a catalytic converter and is intended to leave the existing emissions-control equipment intact.

This makes it suitable for repairing the downstream exhaust system without replacing functioning emissions components.

Important: The exhaust system must be installed without removing, bypassing, or modifying the vehicle's required emissions-control equipment. Applicable inspection and emissions requirements vary by jurisdiction.

Honda OEM Part Number Interchange

MagnaFlow lists the following Honda OEM part numbers as interchange references for components covered by this exhaust system:

  • 18030-S9A-A00

  • 18030-S9A-A01

  • 18030-S9A-A02

  • 18030-SCA-A01

  • 18030-SCA-A02

  • 18220-S9A-003

  • 18220-S9A-023

  • 18220-SCA-E02

  • 18220-SCA-E03

  • 18220-SCA-E05

Important: These are manufacturer-provided interchange references for exhaust components within the replacement system. They do not indicate that each OEM part is individually identical to the complete BRExhaust kit.

Always confirm vehicle-specific compatibility before ordering.

Common Reasons for Replacement

  • Rusted Exhaust Pipes: Corrosion can weaken the exhaust tubing and eventually create holes or leaks.

  • Leaking Exhaust Connections: Worn gaskets, damaged flanges, or corroded joints can allow exhaust gases to escape.

  • Damaged Mufflers: Internal deterioration or external corrosion can cause excessive noise and rattling.

  • Excessive Exhaust Noise: A failing exhaust system may become significantly louder than normal.

  • Exhaust Rattling: Loose or deteriorated exhaust components can contact the underbody.

  • High-Mileage Vehicle Maintenance: Older CR-V models may require exhaust replacement due to age and accumulated wear.

  • Failed Exhaust Inspection: Visible exhaust damage or leakage may require repair.

  • Damaged Tailpipe: Road debris or impact damage can deform the exhaust outlet.

  • Previous Exhaust Repairs: Poorly fitted universal components or temporary repairs may need replacement.

  • Complete Exhaust Restoration: Replacing multiple deteriorated sections together can provide a more comprehensive repair.

Installation Notes

  1. Verify Vehicle Fitment: Confirm the vehicle is a 2002–2006 Honda CR-V equipped with the 2.4L engine.

  2. Inspect the Existing Exhaust: Identify damaged sections, corroded connections, and any aftermarket modifications.

  3. Allow the Exhaust to Cool: Never work on hot exhaust components.

  4. Raise and Support the Vehicle Safely: Use an appropriate lift or properly rated jack stands.

  5. Inspect Factory Mounting Points: Check the exhaust hangers, mounting brackets, and connection points for damage.

  6. Remove the Existing Exhaust: Carefully disconnect the original exhaust sections and remove corroded hardware as necessary.

  7. Inspect the Catalytic Converter Connection: Ensure the remaining upstream exhaust connection is in suitable condition.

  8. Compare Replacement Components: Lay out the BRExhaust kit and identify each pipe, muffler, gasket, and hardware component.

  9. Install New Gaskets: Use the supplied sealing components at the appropriate connections.

  10. Position the Exhaust Sections: Install the new exhaust components using the factory routing and mounting locations.

  11. Install Clamps and Hardware: Loosely assemble the connections to allow alignment.

  12. Check Exhaust Clearance: Verify adequate clearance from the fuel system, drivetrain, suspension, underbody, and heat-sensitive components.

  13. Align the Tailpipe: Position the exhaust outlet correctly within the factory exit area.

  14. Tighten the Connections: Secure the clamps and fasteners according to the manufacturer's installation instructions.

  15. Inspect Exhaust Hangers: Ensure the system is supported correctly without excessive tension.

  16. Check for Exhaust Leaks: Start the engine and inspect the connections for escaping exhaust gases.

  17. Listen for Unusual Noise: Confirm there are no rattles, vibrations, or contact points.

  18. Perform a Road Test: Check the exhaust system under normal operating conditions.

  19. Reinspect the System: After initial use and cooling, inspect the clamps, mounting points, and exhaust clearances.

Installation Recommendation: Professional installation is recommended when working with heavily corroded exhaust components or damaged factory mounting hardware.

What's Included

The MagnaFlow BRExhaust 106-0722 includes the vehicle-specific replacement exhaust assemblies and the following manufacturer-listed installation hardware:

  • (1) Complete Multi-Piece Direct-Fit Replacement Exhaust System

  • (2) 2-Inch U-Bolt Clamp Saddle Hangers

  • (1) Donut Gasket

  • (1) Spring Bolt Kit

  • (1) 2-Inch U-Bolt Clamp

  • (1) Ring Gasket

  • (3) Bolts

  • (3) Nuts

  • Installation Instructions

Not Included:

  • Catalytic Converter

  • Exhaust Manifold

  • Exhaust Header

  • Replacement Oxygen Sensors

  • Additional Hardware for Damaged Factory Components Beyond the Supplied Kit

Quantity Note: One kit is designed to replace the applicable exhaust system on one compatible vehicle.

Restore your 2002–2006 Honda CR-V's exhaust system with the MagnaFlow BRExhaust Direct-Fit Replacement Exhaust Kit (106-0722).

Featuring durable aluminized steel construction, precision mandrel-bent piping, a complete multi-piece bolt-on design, OEM-style exhaust routing, and the necessary installation gaskets and hardware, this system offers a convenient solution for replacing worn or damaged factory exhaust components.

Whether you're repairing exhaust leaks, replacing rusted mufflers, or restoring your high-mileage K24A1-powered CR-V, the MagnaFlow BRExhaust 106-0722 delivers vehicle-specific fitment, dependable construction, and a straightforward replacement solution backed by a two-year manufacturer warranty.

Part Number: 106-0722
Brand: Magnaflow


WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.

Vehicle Fitment

Year Make Model Trim
2002 Honda CR-V EX
2002 Honda CR-V LX
2003 Honda CR-V EX
2003 Honda CR-V LX
2004 Honda CR-V EX
2004 Honda CR-V LX
2005 Honda CR-V EX
2005 Honda CR-V LX
2005 Honda CR-V SE
2006 Honda CR-V EX
2006 Honda CR-V LX
2006 Honda CR-V SE

Engine Fitment

Engine
Honda 2.4L/2354CC - 4 Cylinder (K24A1)

Reviews

No Reviews Yet!

Write a Review