Product Details
Restore your Acura RDX's exhaust system with the MagnaFlow BRExhaust Direct-Fit Replacement Exhaust System Kit (106-0601). Designed specifically for the 2010–2012 Acura RDX equipped with the 2.3L turbocharged four-cylinder engine, this complete replacement exhaust system provides a convenient, durable, and cost-effective alternative to worn or damaged factory exhaust components.
Part of MagnaFlow's BRExhaust Direct-Fit Replacement series, the 106-0601 combines vehicle-specific exhaust piping, muffler assemblies, polished exhaust tips, gaskets, clamps, and installation hardware into one comprehensive package.
Rather than purchasing individual exhaust components or modifying universal exhaust pipes, this kit provides a coordinated replacement system engineered around the Acura RDX's factory exhaust routing, mounting locations, and original exhaust exit configuration.
The system features 2-inch mandrel-bent aluminized steel piping, designed to provide smooth exhaust flow while maintaining the dimensions required for OEM-style fitment. Mandrel bending helps maintain a consistent internal pipe diameter through bends, reducing the restrictions associated with conventional crush-bent tubing.
Its multi-piece, bolt-on design makes installation easier around the RDX's underbody components, including suspension components, crossmembers, and factory mounting brackets.
The system incorporates two aluminized steel muffler assemblies and dual polished stainless steel exhaust tips, maintaining the vehicle's original exhaust appearance while providing durable replacement components.
Unlike MagnaFlow's dedicated performance exhaust systems, the BRExhaust series focuses on dependable OEM-style replacement rather than producing an aggressive aftermarket exhaust note.
Designed to replace the exhaust components downstream of the catalytic converter, the 106-0601 retains the vehicle's existing emissions equipment and maintains the original exhaust exit locations.
Whether you're repairing a rusted exhaust system, eliminating exhaust leaks, replacing damaged mufflers, or restoring a high-mileage Acura RDX, the MagnaFlow BRExhaust 106-0601 provides vehicle-specific fitment, durable construction, and a straightforward replacement solution.
Features
Direct-Fit Replacement Exhaust System: Engineered specifically for the 2010–2012 Acura RDX 2.3L Turbo.
Complete Exhaust Repair Kit: Includes replacement exhaust components and specified installation hardware.
2-Inch Main Piping Diameter: Manufacturer-specified main exhaust pipe size.
Mandrel-Bent Exhaust Tubing: Maintains consistent internal pipe dimensions through bends.
Aluminized Steel Construction: Provides durability and corrosion resistance for everyday driving.
Multi-Piece Bolt-On Design: Allows easier installation around underbody components.
No Welding Required: Designed for installation without fabrication under normal conditions.
OEM-Style Exhaust Routing: Follows the vehicle's factory exhaust configuration.
Factory Exhaust Exit Locations: Maintains the original exhaust outlet positioning.
Two-Muffler Configuration: Includes front and rear muffler assemblies.
Dual Polished Stainless Steel Exhaust Tips: Maintains the RDX's factory-style dual exhaust appearance.
6-Inch Oval Exhaust Tips: Features two polished oval exhaust outlets.
Replacement Gaskets Included: Provides the specified exhaust connection seals.
Sleeve Clamps Included: Includes 2-inch and 2.25-inch sleeve clamps.
Spring Bolt Kit Included: Supplies the specified spring-loaded exhaust connection hardware.
Installation Hardware Included: Reduces the need to source individual replacement components.
Exhaust Hangers Included: Designed to use the vehicle's original mounting arrangement.
Catalytic Converter Retained: Does not require removal or replacement of the factory catalytic converter.
DIY-Friendly Construction: Designed for installation using standard automotive tools.
Two-Year Warranty: Covered by the manufacturer's two-year, unlimited-mileage warranty, subject to its terms.
Vehicle-Specific Engineering: Designed for proper routing, alignment, and fitment on compatible Acura RDX models.
Popular Performance Applications
Although the MagnaFlow BRExhaust 106-0601 is primarily an OEM-style replacement system rather than a dedicated performance exhaust, it is well suited to common Acura RDX maintenance and restoration projects.
2010–2012 Acura RDX Exhaust Restoration
K23A1 Turbocharged Engine Maintenance
Factory Turbocharged Acura RDX Repairs
Daily Driver Exhaust Repairs
High-Mileage Acura RDX Restoration
Rusted Muffler Replacement
Corroded Exhaust Pipe Replacement
Factory Exhaust Leak Repairs
OEM-Style Exhaust System Refresh
Stock Engine and Exhaust Configurations
Street-Driven Acura RDX Builds
Factory Dual Exhaust Restoration
FWD and AWD Acura RDX Maintenance Projects
Additional Information
- Manufacturer: MagnaFlow
- Product Brand: BRExhaust
- Manufacturer Part Number: 106-0601
- Product Series: BRExhaust Direct-Fit Replacement
- Product Type: Complete Direct-Fit Replacement Exhaust System
- Vehicle Application: 2010–2012 Acura RDX 2.3L Turbo
- Engine Family: Honda K-Series
- Engine Code: K23A1
- Engine Displacement: 2.3L
- Exhaust Configuration: Multi-Piece Bolt-On Replacement System
- Main Piping Diameter: 2 Inches
- Pipe Material: Aluminized Steel
- Muffler Body Material: Aluminized Steel
- Muffler Finish: Aluminized
- Overall Finish: Satin
- Muffler Quantity: 2
- Front Muffler Body Length: 17.25 Inches
- Front Muffler Body Height: 3.75 Inches
- Front Muffler Body Width: 7.5 Inches
- Rear Muffler Body Length: 18 Inches
- Rear Muffler Body Height: 6 Inches
- Rear Muffler Body Width: 10.5 Inches
- Exhaust Tip Quantity: 2
- Exhaust Tip Shape: Oval
- Exhaust Tip Diameter: 6 Inches
- Exhaust Tip Material: Stainless Steel
- Exhaust Tip Finish: Polished
- Exhaust Exit Style: OEM Location
- Inlet Type: Bolt-On
- Clamping Type: U-Bolt (Manufacturer-Listed)
- Exhaust Hangers Included: Yes
- Gaskets Included: Yes
- Clamps Included: Yes
- Spring Bolt Kit Included: Yes
- Installation Hardware Included: Yes
- Mounting Bracket Included: No
- Catalytic Converter Included: No
- Welding Required: No, Under Normal Installation Conditions
- Vehicle-Specific Fitment: Yes
- Warranty: Two Years, Unlimited Mileage, Subject to Manufacturer Terms
- OEM Interchange Part Numbers: 18220-STK-A02, 18220-SZP-A01, 18307-STK-A21
- UPC: 888563165240
- Quantity: One Complete Exhaust System Kit
Mandrel-Bent Aluminized Steel Construction
The MagnaFlow BRExhaust 106-0601 features precision mandrel-bent aluminized steel exhaust tubing.
Mandrel bending helps maintain a consistent internal pipe diameter through bends, reducing the restrictions that can occur with conventional crush-bent exhaust pipes.
This construction provides an efficient exhaust path while preserving the routing required for direct-fit installation.
The aluminized steel material features a protective aluminum-based coating designed to improve resistance to corrosion and oxidation.
Construction advantages include:
Durable aluminized steel piping
Corrosion-resistant protective coating
Consistent pipe bends
Smooth exhaust routing
OEM-style installation geometry
Suitable durability for daily-driven vehicles
Material Note: The exhaust piping and muffler bodies are constructed from aluminized steel, not stainless steel. The exhaust tips are polished stainless steel.
Corrosion resistance and service life depend on road conditions, exposure to salt, moisture, and maintenance.
Complete Multi-Piece Bolt-On Exhaust Design
One of the primary advantages of the BRExhaust 106-0601 is its multi-piece construction.
Instead of requiring installation of a large, single-piece exhaust assembly, the system is divided into sections that can be positioned around the Acura RDX's underbody components.
This approach simplifies installation and allows the individual sections to be aligned before the clamps and mounting hardware are fully tightened.
Benefits include:
Easier handling during installation
Improved access around underbody obstacles
Adjustable positioning before final tightening
No custom pipe bending required
No welding required under normal conditions
Reduced need to source individual replacement components
The system is engineered to use the vehicle's original exhaust mounting arrangement.
OEM-Style Exhaust Routing and Sound
The MagnaFlow BRExhaust 106-0601 is designed as a replacement for the original Acura RDX exhaust system.
Its primary purpose is to restore proper exhaust function, sealing, routing, and noise control.
Unlike a dedicated performance exhaust designed to produce a significantly louder exhaust note, this system is intended to provide an OEM-style replacement solution.
Replacing a damaged or leaking exhaust system can help eliminate:
Excessive exhaust noise
Exhaust leaks
Metallic rattling
Loose or damaged exhaust sections
Exhaust fumes escaping from compromised connections
Vibration caused by damaged exhaust components
Actual exhaust sound depends on the condition of the engine, turbocharger, catalytic converter, and other exhaust components.
Two-Muffler Exhaust Configuration
The manufacturer specifies a two-muffler configuration for the 106-0601 exhaust system.
The front and rear muffler assemblies work together as part of the complete replacement exhaust.
Front Muffler
Body Length: 17.25 Inches
Body Height: 3.75 Inches
Body Width: 7.5 Inches
Material: Aluminized Steel
Rear Muffler
Body Length: 18 Inches
Body Height: 6 Inches
Body Width: 10.5 Inches
Material: Aluminized Steel
This arrangement is intended to restore factory-style exhaust function and noise control.
Dual Polished Stainless Steel Exhaust Tips
The MagnaFlow BRExhaust 106-0601 features two polished stainless steel exhaust tips.
The manufacturer specifies oval-shaped tips with a 6-inch diameter dimension.
These tips maintain the Acura RDX's original dual exhaust appearance while providing a polished finish.
Benefits include:
Factory-style dual exhaust appearance
Durable stainless steel construction
Polished exterior finish
OEM exhaust exit positioning
Corrosion-resistant tip material
Clean, finished exhaust appearance
Factory Emissions Equipment Compatibility
The BRExhaust 106-0601 is designed to replace exhaust components downstream of the vehicle's catalytic converter.
The kit does not include a catalytic converter and is intended to leave the existing emissions-control equipment intact.
This allows the downstream exhaust system to be repaired without replacing functioning emissions components.
Important: The exhaust system must be installed without removing, bypassing, or modifying required emissions-control equipment. Applicable inspection and emissions requirements vary by jurisdiction.
Acura OEM Part Number Interchange
MagnaFlow lists the following Acura OEM part numbers as interchange references for components covered by this exhaust system:
18220-STK-A02
18220-SZP-A01
18307-STK-A21
These references correspond to factory exhaust components addressed by the BRExhaust replacement kit.
Important: These are manufacturer-provided interchange references. They do not indicate that each OEM component is individually identical to the complete BRExhaust system.
Always verify vehicle-specific compatibility before ordering.
Common Reasons for Replacement
Rusted Exhaust Pipes: Corrosion can weaken exhaust tubing and eventually create holes or leaks.
Leaking Exhaust Connections: Worn gaskets, damaged flanges, or corroded joints can allow exhaust gases to escape.
Damaged Mufflers: Internal deterioration or external corrosion can cause excessive noise and rattling.
Excessive Exhaust Noise: A failing exhaust system may become noticeably louder than normal.
Exhaust Rattling: Loose or deteriorated exhaust components can contact the vehicle's underbody.
High-Mileage Vehicle Maintenance: Older Acura RDX models may require exhaust replacement due to age and accumulated wear.
Failed Exhaust Inspection: Visible exhaust damage or leakage may require repair.
Damaged Exhaust Tips: Road debris or impact damage can deform the exhaust outlets.
Previous Exhaust Repairs: Poorly fitted universal components or temporary repairs may require replacement.
Complete Exhaust Restoration: Replacing multiple deteriorated sections together can provide a more comprehensive repair.
Installation Notes
Verify Vehicle Fitment: Confirm the vehicle is a 2010–2012 Acura RDX equipped with the 2.3L turbocharged engine.
Inspect the Existing Exhaust: Identify damaged sections, corroded connections, and aftermarket modifications.
Allow the Exhaust to Cool: Never work on hot exhaust components.
Raise and Support the Vehicle Safely: Use an appropriate vehicle lift or properly rated jack stands.
Inspect Factory Mounting Points: Check the exhaust hangers, mounting brackets, and connection points for damage.
Remove the Existing Exhaust: Carefully disconnect the original exhaust sections and remove corroded hardware as necessary.
Inspect the Catalytic Converter Connection: Ensure the upstream exhaust connection is in suitable condition.
Compare Replacement Components: Lay out the BRExhaust kit and identify each pipe, muffler, gasket, clamp, and hardware component.
Install New Gaskets: Use the supplied sealing components at the appropriate connections.
Position the Exhaust Sections: Install the new exhaust components using the factory routing and mounting locations.
Install Clamps and Hardware: Loosely assemble the connections to allow alignment.
Check Exhaust Clearance: Verify adequate clearance from the fuel system, drivetrain, suspension, underbody, and heat-sensitive components.
Align the Exhaust Tips: Position both polished exhaust tips correctly within the factory exit locations.
Tighten the Connections: Secure the clamps and fasteners according to the manufacturer's installation instructions.
Inspect Exhaust Hangers: Ensure the system is supported correctly without excessive tension.
Check for Exhaust Leaks: Start the engine and inspect the connections for escaping exhaust gases.
Listen for Unusual Noise: Confirm there are no rattles, vibrations, or contact points.
Perform a Road Test: Check the exhaust system under normal operating conditions.
Reinspect the System: After initial use and cooling, inspect the clamps, mounting points, and exhaust clearances.
Installation Recommendation: Professional installation is recommended when working with heavily corroded exhaust components or damaged factory mounting hardware.
What's Included
The MagnaFlow BRExhaust 106-0601 includes the vehicle-specific replacement exhaust assemblies and the following manufacturer-listed installation hardware:
(1) Complete Multi-Piece Direct-Fit Replacement Exhaust System
(2) Polished Stainless Steel Exhaust Tips
(1) 2.25-Inch Sleeve Clamp
(1) Donut Gasket
(1) 2-Inch Sleeve Clamp
(1) 3-Bolt Gasket
(1) Spring Bolt Kit
Installation Instructions
Not Included:
Catalytic Converter
Exhaust Manifold
Turbocharger
Replacement Oxygen Sensors
Additional Hardware for Damaged Factory Components Beyond the Supplied Kit
Quantity Note: One kit is designed to replace the applicable exhaust system on one compatible vehicle.
Restore your 2010–2012 Acura RDX's exhaust system with the MagnaFlow BRExhaust Direct-Fit Replacement Exhaust Kit (106-0601).
Featuring durable aluminized steel construction, 2-inch precision mandrel-bent piping, a complete multi-piece bolt-on design, two muffler assemblies, dual polished stainless steel exhaust tips, OEM-style exhaust routing, and the necessary installation gaskets and hardware, this system offers a convenient solution for replacing worn or damaged factory exhaust components.
Whether you're repairing exhaust leaks, replacing rusted mufflers, or restoring a high-mileage K23A1-powered Acura RDX, the MagnaFlow BRExhaust 106-0601 delivers vehicle-specific fitment, dependable construction, and a straightforward replacement solution backed by a two-year manufacturer warranty.
| Part Number: | 106-0601 |
| Brand: | Magnaflow |
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
| Year | Make | Model | Trim |
|---|---|---|---|
| 2010 | Acura | RDX | SH-AWD |
| 2011 | Acura | RDX | Base |
| 2011 | Acura | RDX | SH-AWD |
| 2012 | Acura | RDX | Base |
| 2012 | Acura | RDX | SH-AWD |
Engine Fitment
| Engine |
|---|
| Honda 2.3L/2300CC - 4 Cylinder (K23A1) |
Reviews
No Reviews Yet!
Write a Review