Log In Cart
Log In

Create An Account

Log In Cart
Your Cart Is Empty

K-Tuned 88-91 Civic/CRX / 90-93 Integra Front Stabilizer Bar Kit
Part Number: SB-EFDA-400

Images may be for reference only

K-Tuned 88-91 Civic/CRX / 90-93 Integra Front Stabilizer Bar Kit
Part Number: SB-EFDA-400

Be the first to review!
$199.99

Earn 399 Builders Club Points. Learn More

Make Sure It Fits

Ask a Question

Product Details

The K-Tuned Front Stabilizer Bar Kit (SB-EFDA-400) is a race-inspired front suspension reinforcement upgrade designed for 1988–1991 Honda Civic and CRX models and 1990–1993 Acura Integra models equipped with compatible K-Tuned or ETD Racing traction bars.

Developed for high-horsepower front-wheel-drive applications, this stabilizer kit adds supplementary radius arm support between the rear mounting points of the front lower control arms and the vehicle's chassis. This additional bracing helps distribute suspension loads across multiple mounting points rather than relying solely on the single-radius-arm configuration commonly used with aftermarket traction bars.

The K-Tuned stabilizer bars are particularly beneficial for dedicated drag racing vehicles, high-horsepower K-Series swaps, and competition-oriented Honda and Acura builds where additional front suspension support is desirable.

Unlike a traditional sway bar, which primarily controls body roll by connecting the left and right suspension assemblies, these stabilizer bars are designed to reinforce the front suspension's longitudinal support structure.

The additional arms attach to the rear holes of the front lower control arms and extend toward the vehicle's floor frame rails. Their chassis brackets utilize an existing subframe bolt location along with an additional mounting point that must be drilled through the floor frame rail.

Designed to complement existing K-Tuned traction bar assemblies, the SB-EFDA-400 provides an effective way to upgrade a performance-oriented suspension system without replacing the entire traction bar assembly.

Whether building a turbocharged K20-powered EF Civic, a naturally aspirated K24-swapped CRX, or a dedicated DA Integra drag racing project, the K-Tuned Front Stabilizer Bar Kit offers additional structural support for demanding front-wheel-drive performance applications.

Features

  • Front Suspension Reinforcement: Adds supplementary support to compatible traction bar-equipped front suspension systems.

  • 1988–1991 Honda Civic Compatibility: Designed for compatible EF-generation Civic chassis.

  • 1988–1991 Honda CRX Compatibility: Supports compatible second-generation CRX applications.

  • 1990–1993 Acura Integra Compatibility: Designed for compatible DA-generation Integra chassis.

  • K-Tuned Traction Bar Compatibility: Engineered to work with K-Tuned traction bar assemblies.

  • ETD Racing Traction Bar Compatibility: Also designed for compatible ETD Racing traction bars.

  • Additional Radius Arm Support: Adds bracing between the rear lower control arm mounting locations and the chassis.

  • Improved Load Distribution: Helps distribute suspension forces beyond the original single-radius-arm arrangement.

  • High-Horsepower Applications: Developed for demanding race-oriented front-wheel-drive vehicles.

  • Chassis-Mounted Brackets: Reinforcement arms attach to the vehicle's floor frame rails.

  • Existing Subframe Bolt Location: Uses an existing mounting point as part of the chassis bracket installation.

  • Additional Drilled Mounting Point: Provides a second chassis attachment point for the stabilizer bracket.

  • Race-Inspired Engineering: Developed for enthusiasts seeking additional suspension support in competition applications.

  • Installation Hardware Included: Supplied with the required hardware for the stabilizer kit.

  • Traction Bar Upgrade: Adds reinforcement to an existing compatible traction bar system without replacing the main traction bar assembly.

Important: This kit is not compatible with front sway bars. Vehicles equipped with a front sway bar must address this incompatibility before installation.

Traction Bar Compatibility

Designed to work with K-Tuned and ETD Racing traction bar assemblies for the supported chassis.

Examples of compatible K-Tuned traction bar part numbers include:

  • 8891-TB-101: 1988–1991 Honda Civic/CRX Pro Series Traction Bar

  • 8891-TB-109: 1988–1991 Honda Civic/CRX Traction Bar with B-Series Engine Mount

  • 8891-TBK-105: 1988–1991 Honda Civic/CRX K-Swap Traction Bar

  • 9093-TBK-106: 1990–1993 Acura Integra K-Swap Traction Bar

  • 9093-TB-107: 1990–1993 Acura Integra Traction Bar

Important Fitment Notes

  • Requires a compatible K-Tuned or ETD Racing traction bar.

  • Will NOT fit with front sway bars.

  • Requires drilling an additional mounting hole through the floor frame rail.

  • Installation may be affected by chassis modifications, aftermarket suspension components, and existing reinforcement hardware.

  • Verify compatibility with the specific lower control arms and traction bar configuration before purchasing.

Popular Performance Applications

  • 1988–1991 Honda Civic Drag Racing Builds

  • 1988–1991 Honda CRX Drag Racing Builds

  • 1990–1993 Acura Integra Performance Builds

  • K20-Swapped EF Civic and CRX Applications

  • K24-Swapped EF Civic and CRX Applications

  • K-Series-Swapped DA Integra Builds

  • Turbocharged B-Series Performance Applications

  • High-Horsepower Front-Wheel-Drive Race Cars

  • Dedicated Drag Strip Vehicles

  • Front Suspension Reinforcement Projects

  • Competition-Oriented Honda and Acura Builds

  • K-Tuned Traction Bar Upgrades

  • Custom Motorsport Suspension Configurations

Additional Information

  • Manufacturer: K-Tuned
  • Manufacturer Part Number: SB-EFDA-400
  • Product Name: Front Stabilizer Bars
  • Product Type: Front Suspension Stabilizer / Traction Bar Reinforcement Kit
  • Vehicle Applications: 1988–1991 Honda Civic, 1988–1991 Honda CRX, 1990–1993 Acura Integra
  • Chassis Applications: EF Civic / CRX and DA Integra
  • Mounting Location: Rear Mounting Hole of Front Lower Control Arm to Floor Frame Rail
  • Traction Bar Compatibility: K-Tuned and ETD Racing Traction Bars
  • Front Sway Bar Compatibility: Not Compatible
  • Chassis Modification Required: Yes – Drilling Required
  • Existing Mounting Point Used: Factory Subframe Bolt Location
  • Additional Mounting Point: Drilled Floor Frame Rail Hole
  • Installation Hardware: Included
  • Intended Application: High-Horsepower Street and Race Builds / Competition Suspension Reinforcement
  • Main Traction Bar Included: No
  • Quantity: One Front Stabilizer Bar Kit

Additional Front Suspension Support

The K-Tuned Front Stabilizer Bar Kit is designed to provide additional structural support for vehicles already equipped with a compatible traction bar system.

Many aftermarket traction bar assemblies utilize a single radius arm on each side of the front suspension to control longitudinal lower control arm movement.

Although these systems can provide substantial improvements over factory arrangements, high-horsepower racing applications may benefit from additional bracing.

The SB-EFDA-400 adds supplementary radius arms that connect the rear lower control arm mounting locations to the vehicle's chassis.

This arrangement helps distribute suspension forces across additional mounting points, providing a more extensively supported front suspension configuration.

Potential benefits include:

  • Additional longitudinal lower control arm support

  • Improved distribution of suspension forces

  • Reduced reliance on a single-radius-arm support arrangement

  • Additional reinforcement for demanding racing applications

  • More comprehensive front suspension bracing

  • Compatibility with existing K-Tuned and ETD Racing traction bar systems

The stabilizer kit is particularly relevant for vehicles subjected to repeated hard launches and demanding competition conditions.

Designed for High-Horsepower Honda and Acura Builds

High-horsepower front-wheel-drive vehicles can place substantial loads on the front suspension during aggressive acceleration and hard launches.

These forces are especially noticeable in modified Honda and Acura chassis equipped with high-output naturally aspirated or turbocharged engines.

The K-Tuned Front Stabilizer Bar Kit was developed to address the need for additional suspension reinforcement in these demanding applications.

By adding supplementary support between the lower control arms and chassis, the kit helps reinforce the existing traction bar arrangement.

Potential applications include:

  • Turbocharged K20 and K24 builds

  • High-output naturally aspirated K-Series engines

  • Turbocharged B-Series applications

  • Dedicated front-wheel-drive drag racing vehicles

  • Competition-oriented EF Civic and CRX builds

  • High-horsepower DA Integra projects

Performance Note: Additional bracing can improve suspension support, but reductions in wheel hop or improvements in launch performance are not guaranteed. Results depend on the complete suspension configuration, tires, chassis condition, alignment, and track conditions.

K-Tuned and ETD Racing Traction Bar Compatibility

One of the primary advantages of the SB-EFDA-400 is its compatibility with existing K-Tuned and ETD Racing traction bar systems.

Rather than requiring the replacement of a complete traction bar assembly, the stabilizer kit adds supplementary radius arm support to the existing configuration.

This makes it an appealing upgrade for enthusiasts who have already installed a K-Tuned traction bar and want additional reinforcement for a more demanding racing application.

Benefits include:

  • Designed to complement existing compatible traction bars

  • Additional support without replacing the main crossbar

  • Suitable for supported EF Civic, CRX, and DA Integra applications

  • Additional bracing for high-horsepower competition builds

  • Complete mounting hardware supplied with the kit

Important: The main traction bar is sold separately and is required for the intended installation.

Chassis-Mounted Reinforcement Design

The K-Tuned Front Stabilizer Bars utilize chassis-mounted brackets to connect the additional radius arms to the vehicle's floor frame rails.

The bracket arrangement uses one existing subframe mounting hole and one additional hole that must be drilled through the floor frame rail.

This mounting method provides a second attachment point for the stabilizer bracket.

Installation characteristics include:

  • Connection to the rear hole of the front lower control arm

  • Additional radius arm extending toward the chassis

  • Chassis mounting bracket secured to the floor frame rail

  • Use of an existing subframe bolt location

  • Additional drilled mounting hole

  • Supplied hardware for installation

Because drilling is required, careful measurement and proper installation are essential.

The vehicle's chassis should be inspected for corrosion, previous collision damage, and existing modifications before installing the stabilizer kit.

Important Front Sway Bar Compatibility Notice

The K-Tuned SB-EFDA-400 Front Stabilizer Bar Kit will NOT fit with a front sway bar.

This is a critical fitment consideration.

Although both components influence suspension behavior, the K-Tuned Front Stabilizer Bars and a conventional front sway bar serve different purposes.

A conventional front sway bar connects the left and right suspension systems to resist body roll during cornering.

The K-Tuned stabilizer kit instead adds longitudinal reinforcement between the lower control arms and chassis.

The two systems should not be confused or considered interchangeable.

Removing a factory front sway bar can significantly change vehicle handling balance. Any changes to the sway bar configuration should be evaluated as part of the complete suspension setup, particularly on street-driven vehicles.

Common Reasons for Replacement

  • Traction Bar Reinforcement: Add supplementary support to an existing K-Tuned or ETD Racing traction bar.

  • High-Horsepower Builds: Upgrade the front suspension support arrangement for demanding engine configurations.

  • Drag Racing Applications: Add reinforcement for vehicles subjected to repeated hard launches.

  • K-Series Engine Swaps: Support performance-oriented K20 and K24 conversions in compatible chassis.

  • Front Suspension Upgrades: Incorporate additional radius arms into an existing traction bar system.

  • Race Car Preparation: Upgrade front suspension bracing for competition-oriented builds.

  • Chassis Reinforcement Projects: Improve load distribution across additional mounting locations.

  • Damaged Components: Replace damaged stabilizer components with the correct matching kit.

Installation Notes

  1. Verify Vehicle Compatibility: Confirm the vehicle is a supported 1988–1991 Honda Civic/CRX or 1990–1993 Acura Integra.

  2. Confirm Traction Bar Compatibility: Ensure a compatible K-Tuned or ETD Racing traction bar is installed.

  3. Check Front Sway Bar Configuration: This kit will not fit with a front sway bar.

  4. Inspect the Chassis: Check the floor frame rails and subframe mounting locations for corrosion, damage, or previous modifications.

  5. Raise and Support the Vehicle: Use appropriate lifting equipment and secure jack stands.

  6. Locate Lower Control Arm Mounting Points: Identify the rear mounting holes on the front lower control arms.

  7. Position the Stabilizer Arms: Align the supplementary arms between the lower control arms and the chassis mounting locations.

  8. Install the Chassis Brackets: Position each bracket using the existing subframe bolt location.

  9. Mark the Additional Mounting Holes: Carefully identify the required drilling locations according to K-Tuned's installation instructions.

  10. Drill the Floor Frame Rails: Create the additional mounting holes using appropriate tools and precautions.

  11. Protect Exposed Metal: Treat drilled surfaces as appropriate to reduce corrosion risk.

  12. Install the Supplied Hardware: Secure the chassis brackets and stabilizer arms using the included mounting hardware.

  13. Check Suspension Movement: Verify that the lower control arms and stabilizer arms operate without binding or interference.

  14. Inspect Component Clearance: Confirm adequate clearance around suspension components, steering parts, exhaust routing, and nearby chassis hardware.

  15. Torque All Fasteners: Follow the applicable K-Tuned installation instructions and specified torque values.

  16. Verify Suspension Alignment: Have the vehicle's alignment inspected after installation when necessary.

  17. Perform a Final Safety Inspection: Confirm all mounting points are secure before operating the vehicle.

Installation Recommendation: Professional installation is recommended because this kit requires chassis drilling and affects the front suspension support arrangement.

What's Included

  • K-Tuned Front Stabilizer Bar / Additional Radius Arm Kit

  • Chassis Mounting Brackets

  • Required Installation Hardware

Note: The kit provides supplementary front suspension support and is intended for use with a compatible K-Tuned or ETD Racing traction bar.

The main traction bar assembly is not included.

A factory or aftermarket front sway bar cannot be retained with this kit according to K-Tuned's fitment instructions.

Upgrade your 1988–1991 Honda Civic/CRX or 1990–1993 Acura Integra with the K-Tuned Front Stabilizer Bar Kit (SB-EFDA-400) for additional front suspension reinforcement and improved load distribution in demanding performance applications.

Designed to complement K-Tuned and ETD Racing traction bars, this race-inspired kit adds supplementary radius arm support between the front lower control arms and the vehicle's chassis.

With its chassis-mounted reinforcement design, included installation hardware, and compatibility with popular EF Civic, CRX, and DA Integra performance builds, the K-Tuned SB-EFDA-400 is an excellent upgrade for enthusiasts looking to strengthen their front suspension support arrangement for high-horsepower and competition-oriented applications.

Part Number: SB-EFDA-400
Brand: K-Tuned
Location: Front
Position: Left and Right (Driver and Passenger)


WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.

Vehicle Fitment

Year Make Model Trim
1988 Honda CRX DX
1988 Honda CRX HF
1988 Honda CRX Si
1988 Honda Civic Base
1988 Honda Civic DX
1988 Honda Civic LX
1989 Honda CRX Base
1989 Honda CRX HF
1989 Honda CRX Si
1989 Honda Civic Base
1989 Honda Civic DX
1989 Honda Civic LX
1989 Honda Civic Si
1990 Acura Integra GS
1990 Acura Integra LS
1990 Acura Integra RS
1990 Honda CRX Base
1990 Honda CRX HF
1990 Honda CRX Si
1990 Honda Civic Base
1990 Honda Civic DX
1990 Honda Civic EX
1990 Honda Civic LX
1990 Honda Civic Si
1991 Acura Integra GS
1991 Acura Integra LS
1991 Acura Integra RS
1991 Honda CRX Base
1991 Honda CRX HF
1991 Honda CRX Si
1991 Honda Civic Base
1991 Honda Civic DX
1991 Honda Civic EX
1991 Honda Civic LX
1991 Honda Civic Si
1992 Acura Integra GS
1992 Acura Integra GS-R
1992 Acura Integra LS
1992 Acura Integra RS
1993 Acura Integra GS
1993 Acura Integra GS-R
1993 Acura Integra LS
1993 Acura Integra RS

Reviews

No Reviews Yet!

Write a Review