Hard anodized finish can be used with all fuels, including alcohol, E85, and other race fuels.

A good fuel filter is an important part of any fuel system. They are in place to filter out any potential debris or contaminants before they reach the fuel injectors. They are made with 6061 aluminum and are suitable for use with alcohol, E85, and all other race fuels. The 2 important features that make this possible are the hard-anodized body and the high-quality stainless steel mesh filters. The female o-ring ports are easily connected to any size fuel line using standard AN port adapters. Each filter comes with a 30-micron filter. If you are using an aftermarket fuel pump, be sure to check the pump manufacturer's specs for filter micron ratings. The 8AN size filter measures 1.25" in diameter and 3.5" in length. The 10AN size filter measures 2" in diameter and 5.5" in length. Note that these overall length measurements do not include the adapters at each end. Port adapters are available separately from K-Tuned. Below is a general HP guide to help you with filter selection.