The Konig SSM 18x8 +45 Gloss Black with Machined Lip Wheel (SS88514455) combines aggressive five-spoke styling, durable aluminum construction, and a premium two-tone finish. Designed for automotive enthusiasts looking to upgrade their vehicle's factory wheels, the SSM delivers a bold, performance-inspired appearance with the quality and attention to detail associated with Konig Wheels.

Featuring an 18x8-inch wheel size, +45mm offset, and 5x114.3 bolt pattern, the SSM offers a versatile configuration for compatible Honda, Acura, and other performance vehicles. Its distinctive five-spoke design is complemented by a deep machined lip that creates an eye-catching contrast against the wheel's Gloss Black finish.

Manufactured using one-piece cast aluminum construction, the Konig SSM provides a durable alternative to traditional steel wheels while maintaining an attractive weight of approximately 20.5 lbs per wheel.

The SSM's wide five-spoke design gives the wheel a strong visual presence, while the polished appearance of its machined lip adds depth and definition. This combination makes it an excellent choice for enthusiasts seeking a balance between aggressive styling and everyday practicality.

Whether replacing damaged factory wheels, upgrading to an 18-inch wheel and tire package, or completing a custom Honda or Acura street build, the Konig SSM SS88514455 offers distinctive styling, dependable construction, and versatile performance appeal.

Features

• Konig SSM Series: Performance-inspired aftermarket wheel featuring a bold five-spoke design.

• 18x8-Inch Wheel Size: Versatile configuration for compatible street and performance tire applications.

• +45mm Offset: Positive offset suitable for appropriately matched vehicle applications.

• 5x114.3 Bolt Pattern: Designed for compatible five-lug vehicles.

• Gloss Black Finish: Deep, high-gloss black finish provides a premium appearance.

• Machined Lip: Contrasting machined aluminum lip enhances the wheel's visual depth.

• Five-Spoke Design: Wide spokes deliver aggressive, performance-inspired styling.

• One-Piece Cast Aluminum Construction: Durable aluminum alloy wheel construction.

• 20.5 lb Wheel Weight: Manufacturer-listed weight for this configuration.

• 73.1mm Center Bore: Accommodates compatible hubs and hub-centric rings where required.

• 1,518 lb Load Rating: Maximum load capacity per wheel.

• 60-Degree Conical Lug Seat: Designed for compatible conical-seat lug hardware.

• TPMS Compatible: Accepts appropriate tire pressure monitoring sensors.

• Center Cap Included: Matching Konig center cap completes the wheel's appearance.

• Individual Wheel: Sold individually for flexible wheel configurations.

Popular Performance Applications

The Konig SSM SS88514455 features a 5x114.3 bolt pattern and an 18x8 +45 configuration, making it a potential option for various Honda, Acura, and other vehicles.

Honda Performance Applications

• Honda Civic Si: Select five-lug applications with appropriate wheel and tire clearance.

• Honda Accord: Select compatible five-lug configurations.

• Honda Prelude: Select five-lug applications with appropriate clearance verification.

• Honda Civic Type R: Select 5x114.3 applications, subject to brake and model-specific fitment verification.

Acura Performance Applications

• Acura RSX Type-S: Potential fitment with appropriate tire sizing and brake clearance.

• Acura TSX: Select compatible five-lug applications.

• Acura TL: Select configurations where wheel dimensions and load requirements are appropriate.

• Acura Integra: Select compatible five-lug applications.

Additional Performance Applications

• Mitsubishi Lancer Evolution.

• Subaru WRX STI equipped with compatible 5x114.3 hubs.

• Nissan 350Z and 370Z.

• Select Lexus and Toyota five-lug applications.

• Other vehicles equipped with a compatible 5x114.3 bolt pattern.

Popular Performance Builds

• Daily-driven performance vehicles.

• Street-oriented Honda and Acura builds.

• Factory wheel upgrades.

• Custom wheel and tire packages.

• Suspension and coilover upgrades.

• Motorsport-inspired street builds.

• Square or staggered wheel configurations.

• Replacement wheel applications.

Important Fitment Note: These are potential applications based on wheel specifications, not confirmed direct-fit vehicles.

An 18x8 +45 wheel may fit differently depending on the vehicle's factory wheel dimensions, brake system, suspension components, and tire selection.

Always verify bolt pattern, center bore, brake clearance, suspension clearance, fender clearance, tire size, and vehicle load requirements before purchasing.

Additional Information

• Manufacturer: Konig Wheels
• Wheel Model: SSM
• Manufacturer Part Number: SS88514455
• Wheel Diameter: 18 inches
• Wheel Width: 8 inches
• Wheel Size: 18x8
• Bolt Pattern: 5x114.3mm (5x4.5 inches)
• Offset: +45mm
• Center Bore: 73.1mm
• Backspacing: Approximately 6.27 inches
• Wheel Finish: Gloss Black with Machined Lip
• Wheel Color: Gloss Black / Machined Aluminum
• Construction: Cast Aluminum Alloy
• Wheel Construction Type: One-Piece
• Wheel Design: Five-Spoke
• Wheel Weight: Approximately 20.5 lbs
• Load Rating: 1,518 lbs per wheel
• Lug Seat: 60-Degree Conical
• TPMS Compatibility: Yes, with appropriate sensors
• Center Cap: Included
• Quantity: One Wheel
• UPC: 043482202203

One-Piece Cast Aluminum Construction

The Konig SSM utilizes one-piece cast aluminum construction, providing a durable and practical wheel design for compatible street applications.

Unlike multi-piece wheels, which incorporate separate wheel components, the SSM is manufactured as a single aluminum alloy wheel.

This construction provides several advantages:

• Durable aluminum alloy design.

• Reduced maintenance compared with certain multi-piece wheel assemblies.

• Consistent one-piece construction.

• Suitable for daily-driven vehicles.

• Distinctive aftermarket styling.

• Practical replacement for compatible factory wheels.

The SSM is part of Konig's cast wheel collection and should not be confused with the company's Flow Formed or Fully Forged performance wheel series.

Bold Five-Spoke Design

The SSM features a distinctive five-spoke design with wide, pronounced spokes extending toward the outer lip.

This styling creates a strong visual presence while emphasizing the wheel's 18-inch diameter.

The five-spoke configuration provides a clean, aggressive appearance that complements a variety of vehicle styles, from compact performance cars to larger sport-oriented sedans.

Gloss Black with Machined Lip Finish

One of the SSM's most recognizable features is its Gloss Black finish with a contrasting Machined Lip.

The deep black wheel center creates a bold appearance, while the machined outer lip adds brightness and definition.

This two-tone design provides a classic aftermarket wheel aesthetic with modern styling.

The combination works particularly well with a variety of exterior colors, making the SSM a versatile choice for custom street builds.

Deep Machined Lip Styling

The SSM incorporates a distinctive machined lip that gives the wheel additional visual depth.

This design element emphasizes the wheel's five-spoke construction and creates a more aggressive appearance than a conventional single-color wheel.

The visible lip depth varies depending on the wheel's width and offset configuration.

18x8 +45 Wheel Fitment

The 18x8-inch configuration provides a practical platform for appropriately sized street and performance tires.

The +45mm offset determines the wheel's mounting position relative to its centerline and affects both inner suspension clearance and outer fender clearance.

Compared with wider, lower-offset configurations, this wheel may provide a more conservative fitment on certain vehicles.

However, compatibility depends on the original wheel specifications and the complete wheel and tire combination.

Potential installation considerations include:

• Factory or aftermarket suspension clearance.

• Brake caliper clearance.

• Tire width and sidewall selection.

• Fender clearance.

• Steering clearance.

• Alignment and camber settings.

• Hub-centric ring requirements.

Proper fitment should always be confirmed before installation.

73.1mm Center Bore

The SSM SS88514455 features a 73.1mm center bore.

Vehicles with smaller hub diameters may require appropriately sized hub-centric rings to help center the wheel during installation.

Hub-centric rings do not correct an incompatible bolt pattern, incorrect lug hardware, or insufficient brake clearance.

60-Degree Conical Lug Seat

The Konig SSM uses a 60-degree conical lug seat.

Properly matched lug nuts or bolts are essential for safe wheel installation.

Some vehicles equipped with factory ball-seat or other lug hardware may require aftermarket conical-seat hardware.

Always verify thread size, seat profile, lug engagement, and torque specifications before installation.

Tire Pressure Monitoring System Compatibility

The SSM supports compatible tire pressure monitoring system (TPMS) sensors.

Vehicles originally equipped with TPMS may require transferring compatible sensors from the factory wheels or installing replacement sensors.

Sensor compatibility and programming requirements vary by vehicle.

Wheel Load Rating

The SS88514455 features a manufacturer-listed 1,518 lb load rating per wheel.

This rating represents the maximum specified load capacity for the individual wheel.

Before installation, verify that the wheel's load rating meets or exceeds the vehicle's applicable load requirements.

The combined load capacity of the installed wheels must be appropriate for the vehicle's gross axle weight ratings.

Brake Clearance Considerations

The SSM features a five-spoke design that may accommodate various factory brake systems.

However, compatibility with larger brake calipers or aftermarket big brake kits depends on the specific brake system, rotor dimensions, wheel offset, and spoke clearance.

Always verify brake clearance using an appropriate manufacturer-approved brake template before purchasing.

Common Reasons for Replacement

• Factory Wheel Upgrade: Replaces original wheels with a distinctive aftermarket design.

• Appearance Enhancement: Adds aggressive five-spoke styling with a Gloss Black finish and Machined Lip.

• Wheel Size Upgrade: Provides an 18-inch configuration for compatible vehicles.

• Damaged Wheel Replacement: Replaces an existing matching Konig SSM wheel.

• Custom Street Builds: Complements performance-oriented exterior styling.

• Suspension Upgrades: Pairs with properly configured coilover and suspension setups.

• Performance Tire Upgrade: Supports appropriately sized street and performance tires.

• Matching Wheel Replacement: Allows replacement of an individual damaged wheel without purchasing an entire set.

• Custom Wheel Configurations: Suitable for square or staggered setups when correctly selected.

• Daily Driver Customization: Provides an aggressive appearance with practical one-piece aluminum construction.

Installation Notes

1. Verify Bolt Pattern: Confirm that the vehicle uses a 5x114.3 bolt pattern.

2. Check Wheel Dimensions: Ensure the 18x8 +45 configuration is appropriate for the vehicle.

3. Confirm Center Bore Compatibility: Determine whether hub-centric rings are required.

4. Verify Brake Clearance: Check clearance around factory or aftermarket brake calipers.

5. Inspect Suspension Clearance: Ensure sufficient clearance around struts, coilovers, control arms, and related components.

6. Check Fender Clearance: Verify that the wheel and tire combination will not contact the fenders during steering or suspension compression.

7. Select Compatible Tires: Use tire sizes approved for an 8-inch-wide wheel and appropriate for the vehicle.

8. Use Proper Lug Hardware: Install compatible 60-degree conical-seat lug nuts or bolts with the correct thread specifications.

9. Inspect Hub Mounting Surfaces: Clean corrosion and debris from the wheel mounting surfaces.

10. Install Hub-Centric Rings if Required: Use appropriately sized rings when the wheel center bore is larger than the vehicle's hub.

11. Install TPMS Sensors: Use compatible tire pressure monitoring sensors where required.

12. Mount and Balance Tires: Have tires professionally installed and balanced.

13. Torque Lug Hardware: Follow the vehicle manufacturer's specified tightening sequence and torque requirements.

14. Install the Center Cap: Secure the matching Konig center cap according to the manufacturer's instructions.

15. Verify Final Fitment: Check wheel and tire clearance throughout the required suspension and steering travel.

16. Recheck Lug Torque: Follow the applicable wheel and vehicle manufacturer recommendations after initial driving.

17. Maintain the Finish: Clean using wheel-safe products suitable for gloss-painted and machined aluminum finishes.

Important: Additional components such as hub-centric rings, aftermarket lug nuts, extended wheel studs, or spacers may be required depending on the vehicle. All supporting hardware must be selected for the specific application.

What's Included

• (1) Konig SSM 18x8 +45 5x114.3 Gloss Black with Machined Lip Wheel – SS88514455

• (1) Matching Konig Center Cap

Note: Wheels are sold individually. Tires, lug nuts, valve stems, TPMS sensors, hub-centric rings, and installation hardware are not included.

Upgrade your vehicle with the Konig SSM 18x8 +45 Gloss Black with Machined Lip Wheel (SS88514455).

Combining durable one-piece cast aluminum construction, bold five-spoke styling, and a premium two-tone finish, the SSM delivers a distinctive aftermarket appearance with practical everyday functionality.

Featuring a versatile 18x8-inch configuration, +45mm offset, and contrasting machined lip, Konig SS88514455 is an excellent choice for enthusiasts seeking a stylish wheel upgrade for compatible Honda, Acura, and other performance vehicles.