The Konig Oversteer 17x8 +35 Gloss Black Wheel (OS78514355) combines aggressive motorsport-inspired styling with durable aluminum construction and a sleek, high-gloss finish. Featuring a distinctive split five-spoke design and a forward-positioned wheel face, the Oversteer delivers a bold aftermarket appearance suitable for a variety of street and performance builds.

Designed with a 17x8-inch wheel size, +35mm offset, and 5x114.3 bolt pattern, this configuration offers a wider stance than many factory wheel setups while providing a versatile platform for appropriately sized performance tires.

Manufactured using one-piece cast aluminum construction, the Konig Oversteer provides dependable construction for daily-driven vehicles and performance-inspired street applications. Weighing approximately 19.9 lbs, the OS78514355 combines practical wheel dimensions with a modern design.

The Oversteer's split five-spoke layout incorporates angular openings and pronounced spoke contours, giving the wheel a distinctive appearance. Its Gloss Black finish emphasizes these design details while complementing a wide range of vehicle colors.

Whether replacing factory wheels, upgrading to a wider tire configuration, or completing a custom Honda or Acura build, the Konig Oversteer OS78514355 delivers a combination of aggressive styling, durable construction, and everyday versatility.

Features

• Konig Oversteer Series: Modern aftermarket wheel featuring aggressive split five-spoke styling.

• 17x8-Inch Wheel Size: Versatile configuration for compatible street and performance tire applications.

• +35mm Offset: Provides a more aggressive wheel position than comparable higher-offset configurations.

• 5x114.3 Bolt Pattern: Designed for compatible five-lug vehicles.

• Gloss Black Finish: Deep, high-gloss black finish creates a sleek appearance.

• Split Five-Spoke Design: Angular, windowed spokes provide distinctive motorsport-inspired styling.

• Face-Forward Design: Pronounced spoke profile emphasizes the wheel's aggressive appearance.

• One-Piece Cast Aluminum Construction: Durable aluminum alloy wheel design.

• 19.9 lb Wheel Weight: Konig's manufacturer-listed weight for this configuration.

• 73.1mm Center Bore: Accommodates compatible hubs and properly sized hub-centric rings where required.

• 1,518 lb Load Rating: Published maximum load capacity per wheel.

• Exposed Lug Design: Provides a clean, traditional aftermarket wheel appearance.

• Acorn-Style Lug Hardware Compatibility: Uses appropriate conical-seat lug hardware.

• TPMS Compatible: Supports appropriately selected tire pressure monitoring sensors.

• Snap-In Center Cap: Includes a Konig-branded center cap.

• Individual Wheel: Sold individually for flexible wheel configurations.

Popular Performance Applications

The Konig Oversteer OS78514355 features a 5x114.3 bolt pattern and a 17x8 +35 configuration, making it a potential option for various Honda, Acura, and other performance vehicles.

Honda Performance Applications

• Honda Civic Si: Select five-lug applications with appropriate tire sizing and suspension clearance.

• Honda Accord: Select compatible five-lug configurations.

• Honda Prelude: Select five-lug applications with appropriate brake and fender clearance.

• Honda Civic Type R: Custom 5x114.3 applications where 17-inch wheel and brake clearance have been specifically verified.

Acura Performance Applications

• Acura RSX Type-S: Potential fitment with appropriate tire sizing and fender clearance.

• Acura TSX: Select compatible five-lug applications.

• Acura TL: Select configurations where wheel dimensions and load requirements are appropriate.

• Acura Integra: Select compatible five-lug applications.

Additional Performance Applications

• Mitsubishi Lancer Evolution.

• Subaru WRX STI equipped with compatible 5x114.3 hubs.

• Nissan 350Z and 370Z, subject to brake clearance.

• Select Toyota and Lexus five-lug applications.

• Other vehicles equipped with a compatible 5x114.3 bolt pattern.

Popular Performance Builds

• Daily-driven performance vehicles.

• Street-oriented Honda and Acura builds.

• Factory wheel upgrades.

• Custom wheel and tire packages.

• Coilover and suspension upgrades.

• Motorsport-inspired street builds.

• Square or staggered wheel configurations.

• Individual replacement wheel applications.

Important Fitment Note: These are potential applications based on wheel specifications, not confirmed direct-fit vehicles.

A 17x8 +35 wheel may require different tire sizing or additional clearance compared with factory wheel configurations. Some vehicles equipped with larger factory or aftermarket brake systems may not accommodate a 17-inch wheel.

Always verify bolt pattern, center bore, brake clearance, suspension clearance, fender clearance, tire size, and vehicle load requirements before purchasing.

Additional Information

• Manufacturer: Konig Wheels
• Wheel Model: Oversteer
• Manufacturer Part Number: OS78514355
• Wheel Diameter: 17 inches
• Wheel Width: 8 inches
• Wheel Size: 17x8
• Bolt Pattern: 5x114.3mm (5x4.5 inches)
• Offset: +35mm
• Center Bore: 73.1mm
• Backspacing: Approximately 5.88 inches
• Wheel Finish: Gloss Black
• Wheel Color: Black
• Construction: Cast Aluminum Alloy
• Wheel Construction Type: One-Piece
• Wheel Design: Split Five-Spoke / Windowed Five-Spoke
• Wheel Weight: Approximately 19.9 lbs (Konig published specification)
• Load Rating: 1,518 lbs per wheel
• Lug Hardware: Compatible acorn-style conical-seat lug nuts or bolts
• TPMS Compatibility: Yes, with appropriate sensors
• Center Cap: Konig Snap-In Center Cap Included
• Center Cap Code: CAPOS5
• Quantity: One Wheel
• UPC: 043482209523

One-Piece Cast Aluminum Construction

The Konig Oversteer utilizes one-piece cast aluminum construction, providing a practical combination of durability, appearance, and everyday usability.

Unlike multi-piece wheels, which incorporate separate components, the Oversteer is manufactured as a single aluminum alloy wheel.

This construction offers several advantages:

• Durable aluminum alloy design.

• Straightforward maintenance.

• Consistent one-piece construction.

• Suitable for daily-driven vehicles.

• Distinctive aftermarket styling.

• Practical replacement for compatible factory wheels.

The Oversteer is part of Konig's cast wheel collection and should not be confused with the company's Flow Formed or Fully Forged performance wheel series.

Aggressive Split Five-Spoke Design

The Oversteer features a distinctive split five-spoke design with angular windowed sections that give the wheel a modern, performance-inspired appearance.

Its face-forward styling emphasizes the spokes and creates a bold visual presence.

The open sections between the spokes also provide visibility of the vehicle's brake components, complementing performance-oriented builds.

Gloss Black Finish

The OS78514355 features Konig's premium Gloss Black finish.

The deep black finish highlights the wheel's angular spoke design while providing a clean, aggressive appearance.

Gloss Black wheels complement a wide range of vehicle colors, making the Oversteer a versatile choice for street builds, daily drivers, and customized performance vehicles.

Face-Forward Wheel Styling

One of the Oversteer's defining characteristics is its face-forward spoke profile.

This design positions the spokes prominently toward the front of the wheel, creating a distinctive appearance compared with traditional deep-lip wheel designs.

The resulting styling emphasizes the wheel's diameter and aggressive five-spoke arrangement.

Lightweight 19.9 lb Construction

At approximately 19.9 lbs, the 17x8 Oversteer provides a practical weight for its size and one-piece cast aluminum construction.

Wheel weight can influence rotating and unsprung mass, which may affect steering response, suspension behavior, and overall vehicle dynamics.

Actual performance differences depend on the weight and specifications of the original wheel and tire combination.

17x8 +35 Wheel Fitment

The 17x8-inch configuration provides a versatile platform for appropriately sized street and performance tires.

The +35mm offset determines the wheel's mounting position relative to its centerline and affects both inner suspension clearance and outer fender clearance.

Compared with an otherwise identical +45mm offset wheel, the +35mm configuration positions the wheel approximately 10mm farther outward.

This may provide a more aggressive stance but also increases the importance of checking fender and tire clearance.

Potential installation considerations include:

• Factory or aftermarket suspension clearance.

• Brake caliper clearance.

• Tire width and sidewall selection.

• Fender clearance.

• Steering clearance.

• Alignment and camber settings.

• Hub-centric ring requirements.

Proper fitment should always be confirmed before installation.

73.1mm Center Bore

The Oversteer OS78514355 features a 73.1mm center bore.

Vehicles with smaller hub diameters may require appropriately sized hub-centric rings to help center the wheel during installation.

Hub-centric rings do not correct an incompatible bolt pattern, incorrect lug hardware, or insufficient brake clearance.

Acorn-Style Lug Hardware Compatibility

The Konig Oversteer is designed for compatible acorn-style lug hardware.

Properly matched lug nuts or bolts are essential for safe wheel installation.

Before mounting, verify the wheel's required lug seat profile, the vehicle's thread size, and the necessary thread engagement.

Factory lug hardware may not be compatible with aftermarket wheels.

Tire Pressure Monitoring System Compatibility

The Oversteer supports compatible tire pressure monitoring system (TPMS) sensors.

Vehicles originally equipped with TPMS may require transferring compatible sensors from the factory wheels or installing replacement sensors.

Sensor compatibility and programming requirements vary by vehicle.

Wheel Load Rating

The OS78514355 has a published 1,518 lb load rating per wheel.

This rating represents the maximum specified load capacity for the individual wheel.

Before installation, verify that the wheel's load rating meets the vehicle's applicable axle load requirements.

Brake Clearance Considerations

The Oversteer features a windowed five-spoke design that may accommodate various factory brake systems.

However, compatibility with larger brake calipers or aftermarket big brake kits depends on the specific brake system, rotor dimensions, wheel offset, and spoke clearance.

Always verify brake clearance using an appropriate manufacturer-approved brake template before purchasing.

Common Reasons for Replacement

• Factory Wheel Upgrade: Replaces original wheels with a distinctive aftermarket design.

• Appearance Enhancement: Adds aggressive split five-spoke styling with a premium Gloss Black finish.

• Wheel Size Upgrade: Provides a 17-inch configuration for compatible vehicles.

• Damaged Wheel Replacement: Replaces an existing matching Konig Oversteer wheel.

• Custom Street Builds: Complements performance-oriented exterior styling.

• Suspension Upgrades: Pairs with properly configured coilover and suspension setups.

• Performance Tire Upgrade: Supports appropriately sized street and performance tires.

• Matching Wheel Replacement: Allows replacement of an individual damaged wheel without purchasing an entire set.

• Custom Wheel Configurations: Suitable for square or staggered setups when correctly selected.

• Daily Driver Customization: Provides aggressive styling with practical one-piece aluminum construction.

Installation Notes

1. Verify Bolt Pattern: Confirm that the vehicle uses a 5x114.3 bolt pattern.

2. Check Wheel Dimensions: Ensure the 17x8 +35 configuration is appropriate for the vehicle.

3. Confirm Center Bore Compatibility: Determine whether hub-centric rings are required.

4. Verify Brake Clearance: Check clearance around factory or aftermarket brake calipers.

5. Inspect Suspension Clearance: Ensure sufficient clearance around struts, coilovers, control arms, and related components.

6. Check Fender Clearance: Verify that the wheel and tire combination will not contact the fenders during steering or suspension compression.

7. Select Compatible Tires: Use tire sizes approved for an 8-inch-wide wheel and appropriate for the vehicle.

8. Use Proper Lug Hardware: Install compatible conical-seat lug nuts or bolts with the correct thread specifications.

9. Inspect Hub Mounting Surfaces: Clean corrosion and debris from the wheel mounting surfaces.

10. Install Hub-Centric Rings if Required: Use appropriately sized rings when the wheel center bore is larger than the vehicle's hub.

11. Install TPMS Sensors: Use compatible tire pressure monitoring sensors where required.

12. Mount and Balance Tires: Have tires professionally installed and balanced.

13. Torque Lug Hardware: Follow the vehicle manufacturer's specified tightening sequence and torque requirements.

14. Install the Center Cap: Secure the supplied Konig snap-in center cap according to the manufacturer's instructions.

15. Verify Final Fitment: Check wheel and tire clearance throughout the required suspension and steering travel.

16. Recheck Lug Torque: Follow the applicable wheel and vehicle manufacturer recommendations after initial driving.

17. Maintain the Finish: Clean using wheel-safe products suitable for gloss-painted aluminum wheels.

Important: Additional components such as hub-centric rings, aftermarket lug nuts, extended wheel studs, or spacers may be required depending on the vehicle. All supporting hardware must be selected for the specific application.

What's Included

• (1) Konig Oversteer 17x8 +35 5x114.3 Gloss Black Cast Aluminum Wheel – OS78514355

• (1) Matching Konig Snap-In Center Cap

Note: Wheels are sold individually. Tires, lug nuts, valve stems, TPMS sensors, hub-centric rings, and installation hardware are not included.

Upgrade your vehicle with the Konig Oversteer 17x8 +35 Gloss Black Wheel (OS78514355).

Combining durable one-piece cast aluminum construction, aggressive split five-spoke styling, and a premium Gloss Black finish, the Oversteer delivers a distinctive aftermarket appearance with practical everyday functionality.

Featuring a versatile 17x8-inch configuration, +35mm offset, and lightweight 19.9 lb design, Konig OS78514355 is an excellent choice for enthusiasts seeking a stylish wheel upgrade for compatible Honda, Acura, and other performance vehicles.