Images may be for reference only
Product Details
Restore drivetrain stability and improve engine control with the Innovative Mounts 29756 Steel F-Series Replacement Engine Mount Kit, designed for select Honda and Acura F-Series applications equipped with an automatic transmission.
This three-piece engine mount kit provides a performance-oriented replacement for aging factory rubber and hydraulic engine mounts. Featuring durable steel construction and Innovative Mounts' polyurethane bushings, the 29756 helps reduce excessive engine movement, improve drivetrain stability, and maintain more consistent engine and transmission positioning.
The kit is designed for compatible 1994–1997 Honda Accord EX/DX/LX, 1995–1998 Honda Odyssey, 1996–1999 Isuzu Oasis, and 1997–1999 Acura CL applications.
Factory engine mounts can deteriorate over time due to heat, vibration, mileage, and exposure to engine fluids. Worn mounts may allow excessive drivetrain movement, contribute to clunking during gear changes, and reduce the consistency of power delivery.
The Innovative Mounts 29756 replaces the three primary mounting assemblies with steel components and polyurethane bushings engineered for improved drivetrain control.
Designed for F-Series Automatic Transmissions
Unlike manual-transmission replacement kits or engine swap conversion kits, the Innovative Mounts 29756 is specifically designed for compatible F-Series engines equipped with an automatic transmission.
The kit uses the supported factory mounting locations and is intended as a direct replacement for the corresponding original engine mounts.
It includes the driver-side engine mount, passenger-side transmission mount, and rear engine mount.
Performance Polyurethane Bushings
Innovative Mounts' polyurethane bushings provide increased resistance to drivetrain movement compared with conventional factory rubber mounts.
The design also eliminates the hydraulic fluid chambers found in certain OEM mounts, removing a potential source of fluid leakage.
Reducing excessive engine movement can help improve drivetrain response and limit conditions that contribute to wheel hop.
Because polyurethane bushings are firmer than conventional rubber mounts, some additional engine vibration may be noticeable inside the vehicle.
Available Bushing Hardness Options
60A – Red: Street-oriented option with the greatest emphasis on vibration isolation.
75A – Black: Street and performance applications requiring increased drivetrain rigidity.
85A – Gray: Track-oriented applications requiring firmer engine support.
95A – Red: Competition-oriented applications prioritizing maximum resistance to drivetrain movement.
Selecting the correct bushing hardness allows owners to balance drivetrain control with passenger comfort.
Features
Complete Three-Piece Engine Mount Kit: Includes driver-side engine, passenger-side transmission, and rear engine mounts.
Multiple Vehicle Applications: Supports compatible Honda Accord, Honda Odyssey, Isuzu Oasis, and Acura CL models.
F-Series Engine Compatibility: Designed for supported Honda F-Series engine configurations.
Automatic Transmission Fitment: Specifically engineered for compatible automatic-transmission vehicles.
Direct Factory Replacement: Replaces the corresponding original engine mounting assemblies.
Heavy-Duty Steel Construction: Provides durable engine and transmission support.
Bolt-On Installation: Uses the supported factory mounting locations.
Polyurethane Bushings: Help reduce excessive drivetrain movement.
No-Tear Bushing Design: Engineered for durability and vibration control.
Eliminates Hydraulic Fluid Chambers: Removes the fluid-filled construction found in certain factory mounts.
Reduced Engine Rocking: Helps control movement during acceleration and deceleration.
Improved Drivetrain Response: Reduced mount deflection provides more consistent powertrain positioning.
Reduced Wheel Hop: Helps limit drivetrain movement that can contribute to wheel hop.
OEM Hardware Compatibility: Designed to reuse appropriate factory mounting hardware.
No Hood Modifications Required: Manufacturer specifies that hood trimming or notching is unnecessary.
Four Bushing Options: Available in 60A, 75A, 85A, and 95A configurations.
CAD/CAM Designed: Developed using computer-aided design.
Stress Analyzed: Engineered for strength and durability.
Lifetime Manufacturer Warranty: Backed by Innovative Mounts' lifetime warranty, subject to manufacturer terms.
Popular Performance Applications
Factory Engine Mount Replacement
Replace deteriorated original mounts with a durable polyurethane mounting system.
Honda Accord F-Series Builds
Improve drivetrain stability in compatible automatic-transmission Accord applications.
Honda Odyssey and Isuzu Oasis Maintenance
Upgrade worn engine mounts in compatible F-Series automatic vehicles.
Acura CL Four-Cylinder Applications
Provide firmer drivetrain support for compatible 1997–1999 Acura CL F-Series models.
Modified F-Series Engines
Help control excessive drivetrain movement in performance-oriented applications.
Street Performance Vehicles
The 60A and 75A options provide different balances of vibration isolation and drivetrain control.
Track-Oriented Builds
The 85A and 95A options provide increased resistance to mount deflection for more demanding applications.
Additional Information
- Manufacturer: Innovative Mounts
- Part Number: 29756
- Product Type: Steel Replacement Engine Mount Kit
- Mount Construction: Steel
- Bushing Material: Polyurethane
- Number of Mounts: 3
- Mounting Positions: Driver-Side Engine / Passenger-Side Transmission / Rear Engine
- Vehicle Applications: 1994–1997 Honda Accord / 1995–1998 Honda Odyssey / 1996–1999 Isuzu Oasis / 1997–1999 Acura CL
- Engine Compatibility: Supported Honda F-Series
- Transmission Compatibility: Automatic
- Installation Type: Factory-Style Replacement
- Required Timing Belt-Side Engine Post: Honda 11910-P0A-010
- Available Bushing Hardness: 60A / 75A / 85A / 95A
- Manufacturer-Listed Weight: 16 lbs
- Manufacturer Warranty: Lifetime, subject to manufacturer terms
OEM Replacement References
Innovative Mounts lists the following original Honda mounting references:
Driver-Side Engine Mount:
Honda 50820-SV4-J01
Innovative Mounts 29711
Passenger-Side Transmission Mount:
Honda 50806-SV4-981
Honda 50825-SM4-981
Rear Engine Mount:
Honda 50810-SV4-J82
Innovative Mounts 29332
Verify original mount numbers and the current kit bill of materials before ordering.
Polyurethane Bushing Options
60A – Street
The softest available option, offering increased drivetrain support while emphasizing vibration isolation.
75A – Street/Performance
A balanced choice for modified street vehicles and enthusiasts seeking firmer drivetrain response.
85A – Track/Performance
Provides increased rigidity for aggressive driving applications.
95A – Competition
The firmest option, intended for applications where minimizing drivetrain movement takes priority over passenger comfort.
Higher-durometer bushings generally increase noise, vibration, and harshness.
Common Reasons for Replacement
Worn Factory Mounts: Original rubber and hydraulic mounts can deteriorate with age and mileage.
Leaking Hydraulic Mounts: Fluid-filled factory mounts may lose effectiveness when damaged.
Excessive Engine Movement: Worn mounts can allow unwanted rocking during acceleration and deceleration.
Clunking During Gear Changes: Excessive drivetrain movement can contribute to noticeable noises.
Harsh Drivetrain Movement: Deteriorated mounts may allow the engine and transmission to shift excessively.
Wheel Hop: Firmer mounting can help reduce drivetrain movement associated with wheel hop.
Modified Engines: Performance upgrades can increase demands on the original mounting system.
Complete Mount Replacement: Replacing all three primary mounts provides coordinated drivetrain support.
Installation Notes
Verify Vehicle Fitment: Confirm that the vehicle matches one of the supported applications.
Confirm Automatic Transmission: The 29756 is intended for compatible F-Series automatic-transmission configurations.
Inspect Existing Mounts: Check the original engine and transmission mounts for damage, fluid leakage, and deterioration.
Verify the Engine Post: Installation requires Honda 11910-P0A-010, the specified F-Series timing belt-side engine post.
Support the Drivetrain: Properly support the engine and transmission before removing existing mounts.
Remove Factory Mounts: Follow the applicable Honda or vehicle manufacturer service procedures.
Inspect Mounting Locations: Check chassis brackets, threaded mounting points, and surrounding components for damage.
Install the Driver-Side Mount: Position the replacement driver-side engine mount according to Innovative Mounts' instructions.
Install the Transmission Mount: Fit the passenger-side transmission mount using the correct mounting hardware.
Install the Rear Mount: Position the rear mounting assembly at its designated chassis and drivetrain mounting locations.
Verify Drivetrain Alignment: Ensure that the engine and transmission are correctly positioned before final tightening.
Inspect Factory Hardware: Replace any damaged or excessively worn fasteners.
Torque Mounting Hardware: Follow the applicable manufacturer installation instructions and service specifications.
Check Component Clearance: Inspect exhaust, cooling system, intake components, hoses, and surrounding chassis components.
Expect Additional Vibration: Polyurethane bushings may transmit more vibration into the passenger compartment than original factory mounts.
Inspect After Installation: Recheck mounting hardware and drivetrain alignment after the initial driving period.
Professional Installation Recommended: Installation by an experienced automotive technician is strongly recommended.
Verify Fitment Before Final Installation: Innovative Mounts states that mounts showing installation bolt impressions cannot be returned or exchanged.
What's Included
(1) Driver-Side Engine Mount
(1) Passenger-Side Automatic Transmission Mount
(1) Rear Engine Mount
Polyurethane bushings in the selected hardness configuration
Important: This is a three-piece replacement engine mount kit for supported F-Series automatic-transmission applications.
The required Honda 11910-P0A-010 timing belt-side engine post must be sourced separately if not already installed.
The engine, transmission, and other drivetrain components are not included. Factory mounting hardware is reused where specified.
Restore drivetrain stability with the Innovative Mounts 29756 Steel F-Series Replacement Engine Mount Kit, designed for compatible 1994–1997 Honda Accord, 1995–1998 Honda Odyssey, 1996–1999 Isuzu Oasis, and 1997–1999 Acura CL automatic-transmission applications.
Featuring durable steel construction, performance polyurethane bushings, and three application-specific mounting assemblies, this kit provides improved engine control, reduced drivetrain movement, and dependable support for street and performance applications.
| Part Number: | 29756 |
| Brand: | Innovative Mounts |
| Position: | Mount Kit |
| Transmission: | Automatic |
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
| Year | Make | Model | Trim | Notes |
|---|---|---|---|---|
| 1994 | Honda | Accord | DX | Automatic |
| 1994 | Honda | Accord | EX | Automatic |
| 1994 | Honda | Accord | LX | Automatic |
| 1995 | Honda | Accord | DX | Automatic |
| 1995 | Honda | Accord | EX | Automatic |
| 1995 | Honda | Accord | LX | Automatic |
| 1996 | Honda | Accord | 25th Anniversary Edition | Automatic |
| 1996 | Honda | Accord | DX | Automatic |
| 1996 | Honda | Accord | EX | Automatic |
| 1996 | Honda | Accord | LX | Automatic |
| 1996 | Honda | Accord | Value Package | Automatic |
| 1997 | Honda | Accord | DX | Automatic |
| 1997 | Honda | Accord | EX | Automatic |
| 1997 | Honda | Accord | LX | Automatic |
| 1997 | Honda | Accord | SE | Automatic |
| 1997 | Honda | Accord | Value Package | Automatic |
Reviews
No Reviews Yet!
Write a Review