Images may be for reference only
Product Details
Restore drivetrain stability and improve engine control with the Innovative Mounts 29754 Steel F-Series Replacement Engine Mount Kit, specifically designed for 1994–1997 Honda Accord DX and LX models equipped with an F-Series engine and manual transmission.
Engineered as a direct replacement for the factory engine mounting system, this three-piece kit provides a durable, performance-oriented alternative to aging rubber and hydraulic engine mounts. Featuring heavy-duty steel construction and Innovative Mounts' specially designed polyurethane bushings, the 29754 helps reduce excessive engine movement while maintaining more consistent drivetrain positioning during acceleration, deceleration, and gear changes.
The fifth-generation Honda Accord remains a popular platform for daily driving, restoration, and performance modifications. However, original engine mounts can deteriorate after years of use, allowing excessive drivetrain movement that may contribute to clunking noises, inconsistent shifting feel, and wheel hop.
The Innovative Mounts 29754 replaces the three primary mounting assemblies with stronger steel components and polyurethane bushings designed to provide improved drivetrain control.
Direct Replacement for F-Series Manual Applications
Unlike engine swap conversion kits, the Innovative Mounts 29754 is designed as a replacement mounting system for compatible F-Series manual-transmission Accords.
The kit is intended for 1994–1997 Accord DX/LX CD5, CD7, and CE1 chassis configurations using the specified factory-style engine and transmission mounting arrangement.
It includes the driver-side engine mount, passenger-side manual transmission mount, and rear engine mount.
These three components work together to support the engine and transmission while reducing excessive drivetrain movement.
Heavy-Duty Steel Construction
Each mounting assembly features durable steel construction engineered for the demands of performance driving.
Innovative Mounts uses polyurethane bushings in place of conventional factory rubber or fluid-filled mounting designs. By eliminating the hydraulic fluid chambers found in certain original mounts, the system removes a potential source of leakage and deterioration.
The polyurethane bushings help maintain more consistent drivetrain positioning under load, which can improve shifting response and reduce movement that contributes to wheel hop.
Required F-Series Timing Belt-Side Engine Post
Installation requires the appropriate F-Series timing belt-side engine post.
Required Honda Part Number: 11910-P0A-010
Innovative Mounts identifies this component as the engine post used on compatible 1995–1998 Honda Odyssey and 1994–2002 Honda Accord F-Series applications.
Confirm that the correct engine post is installed before beginning the mount replacement. If the required component is missing, it must be sourced separately.
Three-Bolt Rear Engine Mount Configuration
The Innovative Mounts 29754 includes the 29630 rear engine mount, designed for the shorter three-bolt rear mounting arrangement used on compatible Accord DX/LX applications.
Accord EX models using the taller four-bolt rear mounting arrangement require a different kit.
For compatible Accord EX F-Series manual-transmission applications, see Innovative Mounts 29757.
Polyurethane Bushing Options
The Innovative Mounts 29754 is available in three polyurethane bushing hardness configurations:
75A – Black: Street and performance applications.
85A – Gray: Track-oriented applications requiring increased drivetrain rigidity.
95A – Red: Dedicated competition applications prioritizing maximum drivetrain control.
Higher-durometer bushings provide increased resistance to engine movement but generally transmit more vibration into the chassis.
Whether you're replacing worn factory mounts, restoring your fifth-generation Accord, or upgrading a modified F-Series performance vehicle, the Innovative Mounts 29754 provides a durable and application-specific mounting solution.
Features
Complete Three-Piece Engine Mount Kit: Includes driver-side engine, passenger-side transmission, and rear engine mounts.
1994–1997 Honda Accord Compatibility: Designed for fifth-generation Accord CD/CE chassis applications.
DX/LX Chassis Fitment: Specifically engineered for compatible CD5, CD7, and CE1 configurations.
F-Series Engine Compatibility: Designed for factory-style F-Series engine applications.
Manual Transmission Fitment: Engineered for compatible five-speed manual-transmission vehicles.
Direct OEM Replacement: Replaces the corresponding factory engine mounting assemblies.
Heavy-Duty Steel Construction: Provides durable drivetrain support.
Bolt-On Installation: Uses the supported factory mounting locations.
No-Tear Polyurethane Bushings: Designed to resist deterioration and control excessive drivetrain movement.
Eliminates Hydraulic Fluid Chambers: Removes the fluid-filled construction found in certain factory mounts.
Reduced Engine Rocking: Helps minimize excessive movement during acceleration and deceleration.
Improved Shifting Consistency: Firmer mounts help maintain more predictable transmission positioning.
Improved Drivetrain Response: Reduced mount deflection provides more consistent engine and transmission support.
Reduced Wheel Hop: Helps control drivetrain movement that can contribute to wheel hop.
Three-Bolt Rear Mount: Includes the appropriate rear mount for supported DX/LX applications.
No Hood Modifications Required: Designed for installation without trimming or notching the factory hood.
Uses OEM Mounting Hardware: Reuses compatible original Honda hardware.
Multiple Bushing Hardness Options: Available in 75A, 85A, and 95A configurations.
CAD/CAM Designed: Developed using computer-aided design for application-specific fitment.
Stress Analyzed: Engineered for strength and durability.
Lifetime Manufacturer Warranty: Backed by Innovative Mounts' lifetime warranty, subject to manufacturer terms.
Popular Performance Applications
1994–1997 Honda Accord Engine Mount Replacement
Replace deteriorated factory rubber or hydraulic engine mounts with a performance-oriented polyurethane mounting system.
F22B2 Performance Builds
Provides improved drivetrain stability for modified F22B2 engines equipped with performance intake, exhaust, and other upgrades.
Naturally Aspirated F-Series Applications
Helps reduce excessive drivetrain movement in modified naturally aspirated F-Series engines.
Turbocharged F-Series Builds
Provides increased resistance to engine movement in compatible turbocharged F-Series applications.
Street Performance Vehicles
The 75A polyurethane bushing option provides firmer drivetrain support while retaining some vibration isolation for street-driven vehicles.
Autocross and Track Applications
The 85A polyurethane bushing option offers increased drivetrain rigidity for demanding performance driving.
Drag Racing Applications
The 95A polyurethane bushing option provides maximum resistance to mount deflection for competition-oriented vehicles.
Honda Accord Restoration Projects
Provides a durable replacement solution for enthusiasts restoring or maintaining a fifth-generation Accord with a manual transmission.
Additional Information
- Manufacturer: Innovative Mounts
- Part Number: 29754
- Product Type: Steel Replacement Engine Mount Kit
- Mount Construction: Steel
- Bushing Material: Polyurethane
- Number of Mounts: 3
- Mounting Positions: Driver-Side Engine / Passenger-Side Transmission / Rear Engine
- Primary Vehicle Application: 1994–1997 Honda Accord DX/LX
- Chassis Compatibility: CD5 / CD7 / CE1
- Engine Compatibility: Honda F-Series
- Transmission Compatibility: Manual Transmission
- Rear Engine Mount Configuration: Short Three-Bolt Style
- Installation Type: Direct OEM Replacement
- Required Timing Belt-Side Engine Post: Honda 11910-P0A-010
- Manufacturer-Listed Weight: Approximately 10 lbs
- Manufacturer Warranty: Lifetime Warranty, subject to manufacturer terms
Individual Mount Components
29711: Driver-Side Engine Mount
29720: Passenger-Side Manual Transmission Mount
29630: Rear Engine Mount – Three-Bolt Configuration
Factory Honda Mount References
The Innovative Mounts 29754 replaces the corresponding factory Honda mounting assemblies associated with the following part numbers:
Driver-Side Engine Mount:
Honda 50820-SV4-J01
Innovative Mounts replacement: 29711
Passenger-Side Transmission Mount:
Honda 50806-SV4-000
Honda 50825-SS0-000
Innovative Mounts replacement: 29720
Rear Engine Mount:
Honda 50810-SV4-000
Innovative Mounts replacement: 29630
Factory part numbers are provided for reference. Verify the original mounting configuration before ordering.
Available Polyurethane Bushing Hardness Options
75A – Black
Street and performance configuration offering increased drivetrain rigidity. Manufacturer-listed horsepower guidance: approximately 250–400 HP.
85A – Gray
Track-oriented configuration providing increased resistance to drivetrain movement. Manufacturer-listed horsepower guidance: approximately 400–500 HP.
95A – Red
Competition-oriented configuration providing maximum resistance to mount deflection. Manufacturer-listed horsepower guidance: 500+ HP.
Horsepower ranges are general manufacturer selection guidance rather than guaranteed capacity limits. Actual bushing selection should consider engine torque, vehicle use, and acceptable vibration levels.
Important Difference Between 29754 and 29757
Innovative Mounts 29754: F-Series manual-transmission replacement kit for compatible Accord DX/LX applications using the shorter three-bolt rear mount.
Innovative Mounts 29757: F-Series manual-transmission replacement kit for compatible Accord EX applications using the taller four-bolt rear mount.
Verify the rear engine mounting arrangement before ordering, particularly on vehicles with previous drivetrain modifications.
Common Reasons for Replacement
Worn Factory Engine Mounts: Original rubber and hydraulic components can deteriorate with age and mileage.
Excessive Engine Rocking: Worn mounts can allow excessive drivetrain movement during acceleration and deceleration.
Leaking Hydraulic Mounts: Factory fluid-filled mounts can lose effectiveness when damaged or deteriorated.
Clunking During Gear Changes: Excessive drivetrain movement may contribute to unwanted noises during shifting.
Inconsistent Shifting Feel: Firmer polyurethane bushings help maintain more consistent transmission positioning.
Wheel Hop During Acceleration: Reduced drivetrain movement can help minimize conditions contributing to wheel hop.
Modified F-Series Engines: Increased engine torque places additional demands on the original mounting system.
Improved Drivetrain Response: Reduced mount deflection helps provide more predictable engine positioning.
Complete Engine Mount Replacement: Replacing the three primary mounts provides coordinated drivetrain support.
Street and Track Performance: Multiple bushing hardness options allow owners to select the appropriate level of drivetrain rigidity.
Installation Notes
Verify Vehicle Compatibility: Confirm that the vehicle is a supported 1994–1997 Honda Accord DX/LX CD5/CD7/CE1 chassis.
Confirm Engine Configuration: Verify that the vehicle uses a compatible F-Series engine.
Identify the Transmission: Confirm that the installed transmission is a compatible Honda manual transmission.
Verify the Timing Belt-Side Engine Post: Installation requires Honda part number 11910-P0A-010.
Inspect the Rear Mount Configuration: Confirm that the vehicle uses the shorter three-bolt rear mounting arrangement.
Check Accord EX Applications: Vehicles using the taller four-bolt rear mount require a different kit, such as Innovative Mounts 29757.
Support the Engine and Transmission: Properly support the drivetrain before removing existing mounting components.
Remove Existing Engine Mounts: Follow the applicable Honda service procedures when removing the original mounting assemblies.
Inspect Chassis Mounting Locations: Check the mounting points, brackets, subframe, and surrounding components for damage or excessive wear.
Install the Driver-Side Engine Mount: Position the Innovative Mounts 29711 assembly according to the manufacturer's instructions.
Install the Passenger-Side Transmission Mount: Position the Innovative Mounts 29720 assembly at the designated transmission mounting location.
Install the Rear Engine Mount: Position the Innovative Mounts 29630 assembly at the three-bolt rear mounting location.
Verify Mounting Hardware: Inspect original Honda mounting hardware and replace damaged or worn fasteners.
Align the Drivetrain: Ensure that the engine and transmission are properly positioned before final tightening.
Avoid Bushing Preload: Confirm proper drivetrain alignment to prevent unnecessary stress on the polyurethane bushings.
Torque Mounting Hardware: Tighten all fasteners according to Innovative Mounts' instructions and applicable Honda service specifications.
Verify Axle Alignment: Confirm proper axle positioning and clearance.
Inspect Surrounding Components: Check clearance around the engine, transmission, exhaust system, intake components, radiator, hoses, and chassis structure.
Select the Appropriate Bushing Hardness: Choose the polyurethane durometer that best matches the vehicle's intended use and acceptable vibration level.
Expect Increased Vibration: Polyurethane engine mounts generally transmit more vibration into the chassis than factory rubber or hydraulic mounts, especially with higher-durometer bushings.
Inspect After Installation: Recheck mounting hardware, drivetrain alignment, and surrounding component clearances after the initial driving period.
Professional Installation Recommended: Installation by an experienced Honda technician or performance automotive specialist is recommended.
Confirm Fitment Before Bolting Down: Innovative Mounts states that mounts showing installation bolt impressions cannot be returned or exchanged. Verify all mounting requirements before installation.
What's Included
(1) Driver-Side Engine Mount – Innovative Mounts 29711
(1) Passenger-Side Manual Transmission Mount – Innovative Mounts 29720
(1) Rear Engine Mount – Innovative Mounts 29630
Polyurethane bushings in the selected hardness configuration
Important: This is a three-piece steel replacement engine mount kit for compatible 1994–1997 Honda Accord DX/LX F-Series manual-transmission applications.
The required Honda 11910-P0A-010 F-Series timing belt-side engine post must be sourced separately if it is not already installed.
The front torque mount is not included.
Compatible factory Honda mounting hardware is reused where specified. Verify any additional hardware requirements before installation.
Upgrade your fifth-generation Honda Accord with the Innovative Mounts 29754 Steel F-Series Replacement Engine Mount Kit, specifically engineered for compatible 1994–1997 Honda Accord DX/LX CD5/CD7/CE1 applications equipped with an F-Series engine and manual transmission.
Featuring heavy-duty steel construction, Innovative Mounts' no-tear polyurethane bushings, and three application-specific mounting assemblies, this kit provides improved drivetrain stability, reduced engine movement, and more consistent powertrain response.
Whether you're replacing worn factory mounts, restoring your F22-powered Accord, or upgrading a modified street or track vehicle, Innovative Mounts delivers the strength and durability needed for your project.
| Part Number: | 29754 |
| Brand: | Innovative Mounts |
| Position: | Mount Kit |
| Transmission: | Manual |
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
| Year | Make | Model | Trim | Notes |
|---|---|---|---|---|
| 1994 | Honda | Accord | DX | Manual |
| 1994 | Honda | Accord | LX | Manual |
| 1995 | Honda | Accord | DX | Manual |
| 1996 | Honda | Accord | DX | Manual |
| 1997 | Honda | Accord | DX | Manual |
Reviews
No Reviews Yet!
Write a Review