Images may be for reference only
Product Details
Complete your fifth-generation Honda Accord engine conversion with the Innovative Mounts 29753 Steel H23/F20B Conversion Engine Mount Kit, designed for compatible 1994–1997 Honda Accord EX applications using an H23-Series or F20B engine with a manual transmission.
The Innovative Mounts 29753 provides a three-piece mounting solution for enthusiasts upgrading their Accord with a Honda H23A or F20B drivetrain. Engineered with durable steel mounting assemblies and performance polyurethane bushings, this kit helps maintain consistent engine positioning, reduce excessive drivetrain movement, and provide dependable support for street and performance applications.
Honda's H23 and F20B engines are popular choices for Accord conversions, particularly among enthusiasts building naturally aspirated, turbocharged, or JDM-inspired performance vehicles. However, successful engine installation requires the correct mounting components to accommodate the engine's timing belt-side bracket configuration and the chassis's rear mounting arrangement.
The Innovative Mounts 29753 addresses these requirements with application-specific mounts designed for the fifth-generation Accord EX chassis.
Designed for H23 and F20B Engine Conversions
The Innovative Mounts 29753 is configured for compatible H23-Series and F20B engine swaps using a manual transmission.
The kit supports popular engine configurations such as the JDM H23A and Honda F20B, provided the correct engine post, transmission, and supporting components are used.
Compared with conventional factory rubber or hydraulic mounts, the polyurethane bushings provide increased resistance to drivetrain movement. This helps maintain more consistent engine and transmission positioning during acceleration, deceleration, and shifting.
Accord EX Four-Bolt Rear Engine Mount
An important feature of the Innovative Mounts 29753 is its taller four-bolt rear engine mount configuration.
The kit includes the Innovative Mounts 29731 rear mount, designed for compatible Accord EX chassis equipped with the taller rear mounting arrangement.
This differs from the Innovative Mounts 29752, which includes the shorter 29630 three-bolt rear mount for compatible Accord DX/LX applications.
Selecting the correct rear mount is essential for proper drivetrain alignment and installation.
Required Timing Belt-Side Engine Post
Installation requires the appropriate F-Series timing belt-side engine post.
Required Honda Part Number: 11910-P0A-010
This post provides the engine-side mounting interface needed for the driver-side conversion mount.
The required engine post must be installed or sourced separately if it is not already present on the engine.
Performance Polyurethane Bushing Options
The Innovative Mounts 29753 is available in three polyurethane bushing hardness configurations:
75A: Street and performance applications.
85A: Track-oriented applications requiring increased drivetrain rigidity.
95A: Dedicated competition applications prioritizing maximum drivetrain control.
Higher-durometer bushings reduce mount deflection but generally transmit more engine vibration into the chassis.
Whether you're installing a JDM H23A, upgrading to an F20B engine, or building a modified Accord EX for street or track use, the Innovative Mounts 29753 provides a durable mounting foundation for your conversion.
Features
Complete Three-Piece Engine Mount Kit: Includes driver-side engine, passenger-side transmission, and rear engine mounts.
1994–1997 Honda Accord EX Compatibility: Designed for compatible fifth-generation Accord EX chassis applications.
H23 Engine Swap Compatibility: Supports compatible Honda H23-Series engine conversions.
F20B Engine Swap Compatibility: Designed for Honda F20B engine installations.
Manual Transmission Applications: Engineered for compatible F/H-Series manual drivetrain configurations.
Four-Bolt Rear Engine Mount: Includes the taller Innovative Mounts 29731 rear mount for supported EX applications.
Heavy-Duty Steel Construction: Provides durable drivetrain support for modified engines.
Performance Polyurethane Bushings: Offer increased resistance to engine movement compared with conventional factory mounts.
Reduced Engine Rocking: Helps control excessive movement during acceleration and deceleration.
Improved Shifting Consistency: Firmer mounts help maintain more predictable transmission positioning.
Improved Drivetrain Response: Reduced mount deflection provides more consistent engine and transmission support.
Reduced Wheel Hop: Helps limit drivetrain movement that can contribute to wheel hop.
Application-Specific Mounting Design: Engineered for the specified chassis and engine conversion.
Multiple Bushing Hardness Options: Available in 75A, 85A, and 95A configurations.
Street and Competition Applications: Suitable for performance builds when configured with the appropriate bushings.
Coordinated Mounting System: Replaces the three primary mounting positions with application-specific components.
Popular Performance Applications
Honda Accord EX H23 Engine Swaps
Provides the primary mounting components required for installing a compatible H23 engine and manual transmission into a fifth-generation Accord EX chassis.
JDM F20B Engine Conversions
An excellent choice for enthusiasts upgrading their Accord EX with a Honda F20B drivetrain.
H23A Naturally Aspirated Performance Builds
Offers increased drivetrain stability for modified H23A engines equipped with performance intake, exhaust, and internal engine upgrades.
Turbocharged H23 Applications
Helps control excessive drivetrain movement in compatible forced-induction H23 builds.
F20B Street and Track Builds
Provides firmer engine mounting support for modified F20B-powered vehicles.
Street Performance Applications
The 75A polyurethane bushing option provides increased drivetrain rigidity while maintaining some vibration isolation for street-driven vehicles.
Autocross and Track Applications
The 85A polyurethane bushing option provides firmer drivetrain support for demanding performance driving.
Drag Racing Applications
The 95A polyurethane bushing option offers maximum resistance to mount deflection for dedicated competition vehicles.
Honda Accord Restoration and Conversion Projects
Provides an application-specific mounting solution for enthusiasts upgrading the drivetrain in a fifth-generation Accord EX.
Additional Information
- Manufacturer: Innovative Mounts
- Part Number: 29753
- Product Type: Steel H23/F20B Conversion Engine Mount Kit
- Mount Construction: Steel
- Bushing Material: Polyurethane
- Number of Mounts: 3
- Mounting Positions: Driver-Side Engine / Passenger-Side Transmission / Rear Engine
- Primary Vehicle Application: 1994–1997 Honda Accord EX
- Chassis Compatibility: Compatible Fifth-Generation CD/CE Chassis
- Engine Compatibility: Honda H23-Series / F20B
- Transmission Compatibility: Manual Transmission
- Rear Engine Mount Configuration: Tall Four-Bolt Style
- Installation Type: Engine Conversion Mount Kit
- Required Timing Belt-Side Engine Post: Honda 11910-P0A-010
- Available Bushing Hardness Options: 75A / 85A / 95A
Individual Mount Components
29711: Driver-Side Engine Mount
29620: Passenger-Side Manual Transmission Mount
29731: Rear Engine Mount – Four-Bolt Configuration
Polyurethane Bushing Options
75A – Street/Performance
Designed for street-driven performance applications where increased drivetrain stability is desired without selecting the firmest available bushing.
85A – Track/Performance
Designed for more aggressive driving applications where additional resistance to engine movement is preferred.
95A – Competition
The firmest available option, intended for dedicated competition builds where drivetrain control takes priority over passenger comfort.
Bushing hardness affects vibration transmission, drivetrain movement, and overall driving feel. Horsepower alone should not determine the appropriate bushing selection.
Important Differences Between Accord Conversion Kits
Innovative Mounts 29750: H22 conversion kit for compatible Accord DX/LX applications with a three-bolt rear mount.
Innovative Mounts 29751: H22 conversion kit for compatible Accord EX applications with a four-bolt rear mount.
Innovative Mounts 29752: H23/F20B conversion kit for compatible Accord DX/LX applications with a three-bolt rear mount.
Innovative Mounts 29753: H23/F20B conversion kit for compatible Accord EX applications with a four-bolt rear mount.
The 29753 uses the Honda 11910-P0A-010 timing belt-side engine post, which differs from the engine post specified for H22-oriented conversion kits.
Common Reasons for Replacement or Upgrade
H23 Engine Conversion: Provides the primary mounting components required for a compatible H23 drivetrain swap.
F20B Engine Conversion: Designed for enthusiasts installing a Honda F20B engine into a fifth-generation Accord EX.
Incorrect Factory Mounting Components: Original engine mounts may not accommodate the intended conversion configuration.
Worn Factory Rubber Mounts: Aging mounts can deteriorate and allow excessive drivetrain movement.
Leaking Hydraulic Mounts: Damaged factory hydraulic mounts may no longer provide effective drivetrain support.
Excessive Engine Rocking: Firmer polyurethane bushings help control movement during acceleration and deceleration.
Inconsistent Shifting Feel: Reduced drivetrain movement helps maintain more consistent transmission positioning.
Wheel Hop During Acceleration: Increased mount rigidity can help reduce conditions contributing to wheel hop.
Modified H23/F20B Engines: Provides additional drivetrain control for compatible performance builds.
Complete Mounting System Upgrade: Replaces the three primary mounting assemblies as a coordinated system.
Street and Track Performance: Multiple bushing hardness options allow owners to choose their preferred balance of rigidity and vibration isolation.
Installation Notes
Verify Vehicle Compatibility: Confirm that the vehicle is a supported 1994–1997 Honda Accord EX application.
Inspect the Rear Mount Configuration: Verify that the chassis uses the taller four-bolt rear mounting arrangement required by the 29731 rear mount.
Confirm Engine Compatibility: Ensure that the H23 or F20B engine uses the correct mounting configuration.
Identify the Transmission: Confirm compatibility with the intended manual transmission.
Verify the Timing Belt-Side Engine Post: Installation requires Honda part number 11910-P0A-010.
Inspect Existing Engine Brackets: Confirm that all required factory or conversion-specific brackets are available.
Support the Engine and Transmission: Properly support the drivetrain before removing the original mounts.
Remove Existing Mounting Components: Follow the applicable Honda service procedures.
Inspect Chassis Mounting Locations: Check for damaged brackets, worn hardware, corrosion, or previous modifications.
Install the Driver-Side Engine Mount: Position the Innovative Mounts 29711 assembly according to the manufacturer's instructions.
Install the Passenger-Side Transmission Mount: Position the Innovative Mounts 29620 assembly at the designated transmission mounting location.
Install the Rear Engine Mount: Position the Innovative Mounts 29731 assembly at the four-bolt rear mounting location.
Verify Hardware Compatibility: Inspect and replace damaged factory fasteners as necessary.
Align the Drivetrain: Ensure proper engine and transmission positioning before final tightening.
Avoid Bushing Preload: Do not force mounting components into alignment or tighten them with the drivetrain improperly supported.
Torque All Fasteners: Follow Innovative Mounts' instructions and applicable Honda service specifications.
Verify Axle Alignment: Confirm appropriate axle engagement, operating angles, and clearance.
Inspect Exhaust and Intake Clearance: Check surrounding components for interference with the installed drivetrain.
Check Cooling System Clearance: Inspect radiator hoses, fans, and nearby components.
Complete Manual Conversion Requirements: If converting from an automatic transmission, install the appropriate clutch, flywheel, pedals, hydraulic system, shifter, and related components.
Select the Appropriate Bushing Hardness: Consider the vehicle's intended use and acceptable vibration level.
Expect Increased Vibration: Polyurethane mounts generally transmit more vibration into the chassis than factory rubber or hydraulic mounts.
Inspect After Installation: Recheck mounting hardware and component clearances after the initial driving period.
Professional Installation Recommended: Installation by a technician experienced with Honda drivetrain conversions is recommended.
What's Included
(1) Driver-Side Engine Mount – Innovative Mounts 29711
(1) Passenger-Side Manual Transmission Mount – Innovative Mounts 29620
(1) Rear Engine Mount – Innovative Mounts 29731
Polyurethane bushings in the selected hardness configuration
Important: This is a three-piece engine conversion mount kit, not a complete H23/F20B engine swap package.
The required Honda 11910-P0A-010 timing belt-side engine post must be sourced separately if it is not already installed.
The engine, manual transmission, clutch, flywheel, axles, shifter assembly, and other required conversion components are not included.
Confirm the supplied mounting hardware and any additional installation requirements before beginning the swap.
Complete your fifth-generation Honda Accord EX H23 or F20B engine swap with the Innovative Mounts 29753 Steel H23/F20B Conversion Engine Mount Kit, specifically designed for compatible 1994–1997 Honda Accord EX applications equipped with the taller four-bolt rear mounting arrangement.
Featuring heavy-duty steel construction, performance polyurethane bushings, and three application-specific mounting assemblies, this kit provides improved drivetrain stability, reduced engine movement, and dependable support for modified H-Series and F-Series applications.
Whether you're installing a JDM H23A into your Accord EX, upgrading to an F20B drivetrain, or building a naturally aspirated or turbocharged performance vehicle, Innovative Mounts delivers the drivetrain support needed for your conversion.
| Part Number: | 29753 |
| Brand: | Innovative Mounts |
| Position: | Mount Kit |
| Transmission: | Manual |
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
| Year | Make | Model | Trim | Notes |
|---|---|---|---|---|
| 1994 | Honda | Accord | EX | Manual |
| 1995 | Honda | Accord | EX | Manual |
| 1996 | Honda | Accord | EX | Manual |
| 1997 | Honda | Accord | EX | Manual |
Engine Fitment
| Engine |
|---|
| Honda 2.3L/2259CC - 4 Cylinder (H23A1) |
Reviews
No Reviews Yet!
Write a Review