Images may be for reference only
Product Details
Complete your fifth-generation Honda Accord engine swap with the Innovative Mounts 29752 Steel H23/F20B Conversion Engine Mount Kit, specifically designed for 1994–1997 Honda Accord DX and LX models equipped with the CD5, CD7, or CE1 chassis.
Engineered for enthusiasts installing a compatible Honda H23-Series or F20B engine with a manual transmission, this three-piece conversion kit provides the primary mounting components needed to properly position and support the drivetrain.
The fifth-generation Honda Accord is a popular platform for Honda engine conversions, particularly among enthusiasts looking to upgrade to a JDM H23A or F20B engine. However, installing these engines requires the correct mounting components to accommodate their timing belt-side engine bracket configuration and ensure proper drivetrain alignment.
The Innovative Mounts 29752 addresses these requirements with heavy-duty steel mounting assemblies and performance polyurethane bushings.
Unlike conventional factory rubber or hydraulic engine mounts, polyurethane bushings offer increased resistance to drivetrain movement. This helps maintain more consistent engine and transmission positioning during acceleration, deceleration, and gear changes.
Each mount features Innovative Mounts' unique no-tear polyurethane bushing design, engineered to provide improved drivetrain control while minimizing unnecessary vibration.
The mounting assemblies are CAD/CAM designed and stress analyzed for strength, durability, and application-specific fitment.
Designed for H23 and F20B Engine Conversions
The Innovative Mounts 29752 is specifically configured for 1994–1997 Honda Accord DX/LX H23 and F20B engine conversions using a compatible manual transmission.
Popular applications include JDM H23A and F20B engine swaps, allowing enthusiasts to upgrade their Accord with a performance-oriented Honda drivetrain.
The kit includes an application-specific driver-side engine mount designed around the timing belt-side engine post used for these conversions.
Required Honda Timing Belt-Side Engine Post
Installation requires the 1995–1998 Honda Odyssey / 1994–2002 Honda Accord F-Series timing belt-side engine post.
Required Honda Part Number: 11910-P0A-010
This component is necessary for the driver-side engine mount to attach correctly to the engine.
The required engine post must be installed or sourced separately before completing the conversion.
This is an important distinction between the 29752 and other fifth-generation Accord conversion mount kits.
Three-Bolt Rear Engine Mount Configuration
The Innovative Mounts 29752 includes the Innovative Mounts 29630 rear engine mount, designed for the shorter three-bolt rear mounting arrangement found on compatible Accord DX/LX applications.
Accord EX models equipped with the taller four-bolt rear mounting arrangement require a different conversion kit.
For compatible Accord EX H23/F20B engine swaps, see Innovative Mounts 29753.
Performance Polyurethane Bushing Options
The Innovative Mounts 29752 is available in three polyurethane bushing hardness configurations:
75A: Street and performance applications.
85A: Track-oriented applications requiring increased drivetrain rigidity.
95A: Dedicated competition applications prioritizing maximum resistance to drivetrain movement.
Higher-durometer polyurethane bushings generally transmit more vibration into the vehicle's chassis. Selecting the appropriate hardness allows enthusiasts to balance drivetrain control with passenger comfort.
Whether you're building a JDM F20B-powered Accord, installing an H23A engine, or upgrading a modified fifth-generation Accord, the Innovative Mounts 29752 provides a durable and application-specific engine mounting solution.
Features
Complete Three-Piece Conversion Kit: Includes driver-side engine, passenger-side transmission, and rear engine mounts.
1994–1997 Honda Accord Compatibility: Designed for fifth-generation Accord CD/CE chassis applications.
DX/LX Chassis Fitment: Specifically engineered for compatible CD5, CD7, and CE1 models.
H23 Engine Swap Compatibility: Supports compatible Honda H23-Series engine conversions.
F20B Engine Swap Compatibility: Designed for Honda F20B engine installations.
Manual Transmission Applications: Engineered for compatible F/H-Series manual drivetrain configurations.
Heavy-Duty Steel Construction: Provides durable drivetrain support.
Bolt-On Conversion Design: Uses the supported factory chassis mounting locations.
No-Tear Polyurethane Bushings: Designed to minimize excessive engine movement.
Reduced Engine Rocking: Helps control drivetrain movement during acceleration and deceleration.
Improved Shifting Consistency: Firmer bushings help maintain more consistent transmission positioning.
Improved Drivetrain Response: Reduced mount deflection provides more predictable powertrain movement.
Reduced Wheel Hop: Helps limit drivetrain movement that can contribute to wheel hop during aggressive acceleration.
Three-Bolt Rear Mount: Includes the correct rear mounting assembly for supported DX/LX applications.
No Hood Modifications Required: Designed for installation without trimming or notching the factory hood.
Uses Compatible OEM Hardware: Reuses original Honda mounting hardware where specified.
Multiple Bushing Hardness Options: Available in 75A, 85A, and 95A configurations.
CAD/CAM Designed: Developed using computer-aided design for accurate application-specific fitment.
Stress Analyzed: Engineered for strength and durability.
Lifetime Manufacturer Warranty: Backed by Innovative Mounts' lifetime warranty, subject to manufacturer terms.
Popular Performance Applications
1994–1997 Honda Accord H23 Engine Swaps
Provides the primary engine mounting components needed to install a compatible H23 engine and manual transmission into a fifth-generation Accord DX/LX chassis.
JDM F20B Engine Conversions
An excellent choice for enthusiasts upgrading their Accord with a Honda F20B engine and compatible manual transmission.
H23A Performance Builds
Provides increased drivetrain stability for naturally aspirated H23 engines equipped with performance intake, exhaust, and internal engine upgrades.
Naturally Aspirated F20B Builds
Helps reduce excessive drivetrain movement in modified F20B engines used for street and track applications.
Turbocharged H23/F20B Applications
Offers increased resistance to engine movement in compatible forced-induction builds.
Street Performance Vehicles
The 75A polyurethane bushing option provides firmer drivetrain support while maintaining some vibration isolation for street-oriented applications.
Autocross and Track Applications
The 85A polyurethane bushing option offers increased drivetrain rigidity for demanding performance driving.
Drag Racing Applications
The 95A polyurethane bushing option provides maximum resistance to mount deflection for competition-oriented vehicles.
Honda Accord Restoration and Conversion Projects
Provides an application-specific mounting solution for enthusiasts upgrading the drivetrain in a fifth-generation Accord.
Additional Information
- Manufacturer: Innovative Mounts
- Part Number: 29752
- Product Type: Steel H23/F20B Conversion Engine Mount Kit
- Mount Construction: Steel
- Bushing Material: Polyurethane
- Number of Mounts: 3
- Mounting Positions: Driver-Side Engine / Passenger-Side Transmission / Rear Engine
- Primary Vehicle Application: 1994–1997 Honda Accord DX/LX
- Chassis Compatibility: CD5 / CD7 / CE1
- Engine Compatibility: Honda H23-Series / F20B
- Transmission Compatibility: Manual Transmission
- Rear Engine Mount Configuration: Short Three-Bolt Style
- Installation Type: Engine Conversion Mount Kit
- Required Timing Belt-Side Engine Post: Honda 11910-P0A-010
- Manufacturer-Listed Weight: Approximately 11 lbs
- Manufacturer Warranty: Lifetime Warranty, subject to manufacturer terms
Individual Mount Components
29711: Driver-Side Engine Mount
29620: Passenger-Side Manual Transmission Mount
29630: Rear Engine Mount – Three-Bolt Configuration
Factory Honda Mount References
The manufacturer identifies the following factory Honda mount references for the corresponding replacement mounting positions:
Passenger-Side Transmission Mount:
Honda 50806-SS0-000
Honda 50825-SS0-000
Innovative Mounts replacement: 29620
Rear Engine Mount:
Honda 50810-SS0-000
Innovative Mounts replacement: 29630
Factory part numbers are provided for reference. Verify the original mounting configuration and conversion requirements before ordering.
Available Polyurethane Bushing Hardness Options
75A – Black
Street and performance configuration offering increased drivetrain rigidity. Manufacturer-listed horsepower guidance: approximately 250–400 HP.
85A – Gray
Track-oriented configuration providing increased resistance to drivetrain movement. Manufacturer-listed horsepower guidance: approximately 400–500 HP.
95A – Red
Competition-oriented configuration providing maximum resistance to mount deflection. Manufacturer-listed horsepower guidance: 500+ HP.
Horsepower ranges are general manufacturer recommendations rather than guaranteed capacity limits. Bushing selection should also consider engine torque, intended vehicle use, and acceptable vibration levels.
Important Differences Between Accord Conversion Kits
Innovative Mounts 29750: H22 conversion kit for compatible Accord DX/LX applications with a three-bolt rear mount.
Innovative Mounts 29751: H22 conversion kit for compatible Accord EX applications with a four-bolt rear mount.
Innovative Mounts 29752: H23/F20B conversion kit for compatible Accord DX/LX applications with a three-bolt rear mount.
Innovative Mounts 29753: H23/F20B conversion kit for compatible Accord EX applications with a four-bolt rear mount.
The 29752 uses the Honda 11910-P0A-010 timing belt-side engine post, while the H22-oriented conversion kits use a different engine post configuration.
Common Reasons for Replacement or Upgrade
H23 Engine Conversion: Provides the primary mounting components required for a compatible H23 drivetrain swap.
F20B Engine Conversion: Designed for enthusiasts installing a Honda F20B engine into a fifth-generation Accord.
Incorrect Factory Mounting Components: Original engine mounts may not accommodate the intended H23/F20B conversion.
Worn Factory Engine Mounts: Aging rubber and hydraulic mounts can deteriorate and allow excessive drivetrain movement.
Excessive Engine Rocking: Polyurethane bushings help reduce unwanted movement during acceleration and deceleration.
Improved Shifting Consistency: Firmer mounts help maintain more predictable transmission positioning.
Wheel Hop During Acceleration: Reduced drivetrain movement can help minimize conditions contributing to wheel hop.
High-Horsepower H23/F20B Builds: Increased engine torque places additional demands on the mounting system.
Improved Drivetrain Response: Reduced mount deflection helps provide more consistent engine and transmission positioning.
Complete Mounting System Upgrade: Replacing the three primary mounts provides coordinated drivetrain support.
Street and Track Performance: Multiple bushing hardness options allow owners to select the appropriate level of drivetrain rigidity.
Installation Notes
Verify Vehicle Compatibility: Confirm that the vehicle is a supported 1994–1997 Honda Accord DX/LX CD5/CD7/CE1 chassis.
Confirm Engine Configuration: Verify that the vehicle uses a compatible H23 or F20B engine.
Identify the Transmission: Confirm that the installed transmission is compatible with the specified manual mounting arrangement.
Verify the Timing Belt-Side Engine Post: Installation requires Honda part number 11910-P0A-010.
Inspect the Rear Mount Configuration: Confirm that the chassis uses the required short three-bolt rear mounting arrangement.
Check Accord EX Applications: Vehicles using the taller four-bolt rear mount require the appropriate alternative kit, such as Innovative Mounts 29753.
Support the Engine and Transmission: Properly support the drivetrain before removing existing mounting components.
Remove Existing Engine Mounts: Follow the applicable Honda service procedures when removing the original mounting assemblies.
Inspect Chassis Mounting Locations: Check the mounting points, brackets, subframe, and surrounding components for damage or excessive wear.
Install the Driver-Side Engine Mount: Position the Innovative Mounts 29711 assembly according to the manufacturer's instructions.
Install the Passenger-Side Transmission Mount: Position the Innovative Mounts 29620 assembly at the designated transmission mounting location.
Install the Rear Engine Mount: Position the Innovative Mounts 29630 assembly at the three-bolt rear mounting location.
Verify Mounting Hardware: Inspect original Honda mounting hardware and replace damaged or worn fasteners.
Align the Drivetrain: Ensure that the engine and transmission are properly positioned before final tightening.
Avoid Bushing Preload: Confirm proper drivetrain alignment to prevent unnecessary stress on the polyurethane bushings.
Torque Mounting Hardware: Tighten all fasteners according to Innovative Mounts' instructions and applicable Honda service specifications.
Verify Axle Alignment: Confirm proper axle positioning, engagement, and clearance for the completed drivetrain configuration.
Inspect Surrounding Components: Check clearance around the engine, transmission, exhaust system, intake components, radiator, hoses, and chassis structure.
Complete Manual Conversion Requirements: If converting from an automatic transmission, additional manual conversion components and chassis modifications may be required. Verify compatibility before proceeding.
Select the Appropriate Bushing Hardness: Choose the polyurethane durometer that best matches the vehicle's intended use and acceptable vibration level.
Expect Increased Vibration: Polyurethane engine mounts generally transmit more vibration into the chassis than factory rubber or hydraulic mounts, especially with higher-durometer bushings.
Inspect After Installation: Recheck mounting hardware, drivetrain alignment, and surrounding component clearances after the initial driving period.
Professional Installation Recommended: Installation by an experienced Honda technician or performance automotive specialist is strongly recommended.
Confirm Fitment Before Bolting Down: Innovative Mounts states that mounts showing installation bolt impressions cannot be returned or exchanged. Verify all mounting requirements before installation.
What's Included
(1) Driver-Side Engine Mount – Innovative Mounts 29711
(1) Passenger-Side Manual Transmission Mount – Innovative Mounts 29620
(1) Rear Engine Mount – Innovative Mounts 29630
Polyurethane bushings in the selected hardness configuration
Important: This is a three-piece steel engine conversion mount kit, not a complete engine swap package.
The required Honda 11910-P0A-010 F-Series timing belt-side engine post must be sourced separately if not already installed.
The engine, manual transmission, clutch, flywheel, axles, shifter assembly, and other drivetrain conversion components are not included.
Compatible factory Honda mounting hardware is reused where specified. Verify additional hardware requirements before installation.
Complete your fifth-generation Honda Accord H23 or F20B engine swap with the Innovative Mounts 29752 Steel H23/F20B Conversion Engine Mount Kit, specifically engineered for compatible 1994–1997 Honda Accord DX/LX CD5/CD7/CE1 chassis applications.
Featuring heavy-duty steel construction, Innovative Mounts' no-tear polyurethane bushings, and three application-specific mounting assemblies, this kit provides improved drivetrain stability, reduced engine movement, and dependable support for street and performance applications.
Whether you're installing a JDM H23A, upgrading to an F20B drivetrain, or building a modified naturally aspirated or turbocharged Accord, Innovative Mounts delivers the strength and precision needed for your project.
| Part Number: | 29752 |
| Brand: | Innovative Mounts |
| Position: | Mount Kit |
| Transmission: | Manual |
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
| Year | Make | Model | Trim | Notes |
|---|---|---|---|---|
| 1994 | Honda | Accord | DX | Manual |
| 1994 | Honda | Accord | LX | Manual |
| 1995 | Honda | Accord | DX | Manual |
| 1996 | Honda | Accord | DX | Manual |
| 1997 | Honda | Accord | DX | Manual |
Engine Fitment
| Engine |
|---|
| Honda 2.3L/2259CC - 4 Cylinder (H23A1) |
Reviews
No Reviews Yet!
Write a Review