Upgrade your Honda's drivetrain support with the Innovative Mounts 29740 Steel Front Torque Engine Mount, designed for compatible 1992–2001 Honda Prelude, 1994–1997 Honda Accord, and 1995–1998 Honda Odyssey applications equipped with F-Series or H-Series engines.

Engineered specifically for use with the Innovative Mounts 50110 Competition Traction Bar Kit, this performance front torque mount provides additional drivetrain stability while helping reduce excessive engine movement during acceleration, deceleration, and shifting.

Factory rubber and hydraulic engine mounts can deteriorate over time, allowing the engine to rock excessively under load. This unwanted movement can contribute to wheel hop, inconsistent drivetrain response, and increased stress on surrounding components.

The Innovative Mounts 29740 addresses these concerns with a durable steel mounting assembly and a performance polyurethane bushing designed to resist excessive drivetrain movement.

Unlike conventional factory rubber mounts, polyurethane provides increased resistance to mount deflection. This helps maintain more consistent engine positioning during aggressive acceleration and demanding performance driving.

The mount features Innovative Mounts' uniquely tapered, no-tear polyurethane bushing design, engineered to minimize unwanted vibration while providing the increased rigidity desired in performance applications.

Each mounting assembly is CAD/CAM designed and stress analyzed for strength, durability, and application-specific fitment.

Requires Innovative Mounts 50110 Competition Traction Bar

Important: The Innovative Mounts 29740 will not fit or function correctly without the Innovative Mounts 50110 Competition Traction Bar Kit.

This front torque mount is specifically designed to work with the mounting arrangement provided by the Innovative Mounts traction bar.

It is not a standalone direct replacement for every factory front engine mount and should not be purchased for installation with an unmodified factory crossmember or an incompatible aftermarket traction bar.

The required Innovative Mounts 50110 traction bar is sold separately.

Designed for F-Series and H-Series Engines

The Innovative Mounts 29740 supports compatible Honda F-Series and H-Series engine configurations installed in the specified Prelude, Accord, and Odyssey chassis.

It is particularly useful for performance builds where additional control over engine movement is desired.

When installed with the required traction bar and compatible drivetrain mounting components, the 29740 helps maintain proper engine positioning without introducing axle bind.

Available Polyurethane Bushing Options

The Innovative Mounts 29740 is available in three polyurethane bushing hardness configurations:

• 75A: Street and performance applications.

• 85A: Track-oriented applications requiring increased drivetrain rigidity.

• 95A: Dedicated competition applications prioritizing maximum resistance to drivetrain movement.

Higher-durometer bushings provide firmer drivetrain support but generally transmit more engine vibration into the chassis.

Whether you're building an H22-powered Prelude, upgrading an F-Series Accord, or improving drivetrain control in a compatible Odyssey performance project, the Innovative Mounts 29740 provides a durable front torque mounting solution.

Features

• Performance Front Torque Engine Mount: Helps control excessive drivetrain movement during acceleration and deceleration.

• 1992–2001 Honda Prelude Compatibility: Designed for supported BA/BB chassis configurations.

• 1994–1997 Honda Accord Compatibility: Supports compatible CD/CE chassis applications.

• 1995–1998 Honda Odyssey Compatibility: Designed for supported RA1 chassis configurations.

• F-Series and H-Series Engine Compatibility: Supports specified Honda drivetrain applications.

• Innovative Mounts 50110 Traction Bar Compatibility: Engineered specifically for use with the required competition traction bar.

• Heavy-Duty Steel Construction: Provides durable engine mounting support.

• Polyurethane Bushing: Offers increased resistance to engine movement compared with conventional factory rubber mounts.

• Uniquely Tapered No-Tear Bushing Design: Engineered for controlled drivetrain movement and vibration management.

• Reduced Engine Rocking: Helps minimize excessive movement under load.

• Improved Drivetrain Response: Reduced mount deflection provides more predictable powertrain positioning.

• Reduced Wheel Hop: Helps control drivetrain movement that can contribute to wheel hop.

• Proper Engine Positioning: Designed to maintain compatible drivetrain alignment without axle bind.

• Bolt-On Installation: Designed for the specified Innovative Mounts traction bar mounting arrangement.

• Uses Factory/OEM Hardware: Utilizes compatible original mounting hardware where specified.

• Multiple Bushing Hardness Options: Available in 75A, 85A, and 95A configurations.

• CAD/CAM Designed: Developed using computer-aided design for application-specific fitment.

• Stress Analyzed: Engineered for strength and durability.

• Lifetime Manufacturer Warranty: Backed by Innovative Mounts' applicable lifetime warranty.

Popular Performance Applications

Honda Prelude H22 Performance Builds

Provides additional front drivetrain support for compatible H22-powered Prelude applications equipped with the Innovative Mounts 50110 traction bar.

Honda Accord F-Series Performance Builds

Helps reduce unwanted engine movement in modified F-Series Accord applications.

H-Series Engine Swap Projects

Provides additional torque control for compatible H-Series drivetrain conversions using the required traction bar.

Naturally Aspirated Performance Applications

Helps maintain more consistent engine positioning during aggressive acceleration and shifting.

Turbocharged F-Series and H-Series Builds

Provides increased resistance to drivetrain movement in compatible turbocharged applications.

Street Performance Vehicles

The 75A polyurethane bushing option provides increased drivetrain rigidity while maintaining some vibration isolation for street-oriented vehicles.

Autocross and Track Applications

The 85A polyurethane bushing option offers firmer drivetrain support during demanding performance driving.

Drag Racing Applications

The 95A polyurethane bushing option provides maximum resistance to engine movement for competition-oriented builds.

Traction Bar Upgrades

Designed to complement the Innovative Mounts 50110 Competition Traction Bar Kit by providing an application-specific front torque mounting solution.

Additional Information

• Manufacturer: Innovative Mounts
• Part Number: 29740
• Product Type: Front Torque Engine Mount
• Mount Construction: Steel
• Bushing Material: Polyurethane
• Mounting Position: Front Torque Mount
• Primary Vehicle Applications: 1992–2001 Honda Prelude / 1994–1997 Honda Accord / 1995–1998 Honda Odyssey
• Chassis Compatibility: BA / BB / CD / CE / RA1, subject to application verification
• Engine Compatibility: Honda F-Series and H-Series
• Installation Type: Bolt-On With Required Innovative Mounts Traction Bar
• Required Traction Bar: Innovative Mounts 50110 Competition Traction Bar Kit
• Traction Bar Included: No
• Mounting Hardware: Uses compatible factory/OEM hardware
• Manufacturer-Listed Product Weight: 10 lbs
• Manufacturer Warranty: Lifetime Warranty, subject to manufacturer terms

Available Polyurethane Bushing Hardness Options

75A – Black

Designed for street and performance applications. Manufacturer-listed horsepower guidance: approximately 250–400 HP.

85A – Gray

Designed for track-oriented applications requiring firmer engine support. Manufacturer-listed horsepower guidance: approximately 400–500 HP.

95A – Red

Designed for competition applications prioritizing maximum drivetrain rigidity. Manufacturer-listed horsepower guidance: 500+ HP.

Horsepower ranges are general manufacturer selection guidance rather than guaranteed capacity limits. Bushing selection should also consider torque output, vehicle use, and acceptable vibration levels.

Important Traction Bar Requirement

The Innovative Mounts 29740 is designed specifically for use with the Innovative Mounts 50110 Competition Traction Bar Kit.

The front torque mount cannot be installed correctly without the required traction bar assembly.

Confirm that the vehicle has the appropriate Innovative Mounts traction bar before ordering.

Common Reasons for Replacement or Upgrade

• Excessive Engine Rocking: Helps reduce unwanted drivetrain movement during acceleration and deceleration.

• Performance Traction Bar Installation: Provides the front torque mounting component designed for the Innovative Mounts 50110 traction bar.

• Worn Factory Mounting Components: Offers a performance-oriented replacement solution when the required traction bar is installed.

• Wheel Hop During Acceleration: Helps control drivetrain movement that can contribute to wheel hop.

• Improved Drivetrain Response: Reduced mount deflection helps maintain more predictable engine positioning.

• High-Horsepower F/H-Series Builds: Provides additional torque control for modified engines.

• Improved Shifting Consistency: More consistent drivetrain positioning can help improve shifting feel.

• Track and Competition Applications: Firmer polyurethane bushings provide increased resistance to drivetrain movement.

• Engine Swap Projects: Supports compatible F-Series and H-Series drivetrain configurations.

• Complete Performance Mounting Upgrades: Complements existing performance engine mounts and the required Innovative Mounts traction bar.

Installation Notes

1. Verify Vehicle Compatibility: Confirm that the vehicle is a supported Honda Prelude, Accord, or Odyssey application.

2. Confirm Engine Compatibility: Verify that the vehicle uses a compatible F-Series or H-Series engine.

3. Verify Traction Bar Compatibility: The Innovative Mounts 29740 requires the Innovative Mounts 50110 Competition Traction Bar Kit.

4. Do Not Install Without the Required Traction Bar: This mount is not designed to function as a standalone replacement with the factory crossmember.

5. Inspect Existing Engine Mounts: Check the condition of the remaining engine and transmission mounts before installation.

6. Support the Drivetrain: Properly support the engine and transmission before removing existing front mounting components.

7. Follow Traction Bar Installation Instructions: Install or inspect the Innovative Mounts 50110 traction bar according to the manufacturer's procedures.

8. Inspect Mounting Locations: Check the traction bar mounting points, engine brackets, and surrounding chassis components for damage or excessive wear.

9. Position the Front Torque Mount: Install the Innovative Mounts 29740 at the designated traction bar mounting location.

10. Use Compatible Factory Hardware: Reuse original Honda mounting hardware where specified by the manufacturer.

11. Verify Mount Alignment: Ensure that the front torque mount aligns correctly with the engine mounting bracket and traction bar.

12. Avoid Bushing Preload: Confirm that the engine and transmission are properly positioned before tightening the mount.

13. Torque Mounting Hardware: Follow Innovative Mounts' installation instructions and applicable Honda service specifications.

14. Inspect Axle Clearance: Confirm that the drivetrain remains properly aligned and that the axles operate without binding.

15. Check Suspension Clearance: Verify clearance around the traction bar, lower control arms, axles, and surrounding suspension components.

16. Inspect Exhaust Clearance: Confirm adequate clearance around the exhaust manifold, downpipe, and nearby components.

17. Verify Engine Movement: Check for unwanted contact between the drivetrain and surrounding chassis components.

18. Select the Appropriate Bushing Hardness: Choose the polyurethane durometer that best matches the vehicle's intended use.

19. Expect Increased Vibration: Polyurethane engine mounts generally transmit more vibration into the chassis than factory rubber or hydraulic mounts.

20. Inspect After Installation: Recheck mounting hardware, alignment, and component clearances after the initial driving period.

21. Professional Installation Recommended: Installation by an experienced Honda technician or performance automotive specialist is strongly recommended.

22. Confirm Fitment Before Bolting Down: Innovative Mounts states that mounts showing installation bolt impressions cannot be returned or exchanged. Verify compatibility before installation.

What's Included

• (1) Innovative Mounts 29740 Front Torque Engine Mount Assembly

• (1) Polyurethane bushing in the selected hardness configuration

• Mount-specific bracket components supplied as part of the assembly

Important: This product includes the front torque mount assembly only.

The Innovative Mounts 50110 Competition Traction Bar Kit is required and sold separately.

The engine, transmission, remaining engine mounts, traction bar, and other drivetrain components are not included.

The mount uses compatible factory Honda mounting hardware where specified.

Improve drivetrain stability and reduce excessive engine movement with the Innovative Mounts 29740 Steel Front Torque Engine Mount, specifically designed for compatible 1992–2001 Honda Prelude, 1994–1997 Honda Accord, and 1995–1998 Honda Odyssey F-Series and H-Series applications.

Featuring durable steel construction, Innovative Mounts' uniquely tapered no-tear polyurethane bushing, and application-specific compatibility with the Innovative Mounts 50110 Competition Traction Bar Kit, this mount provides additional drivetrain control for street and performance builds.

Whether you're upgrading an H22-powered Prelude, building a modified F-Series Accord, or completing a compatible traction bar installation, the Innovative Mounts 29740 provides a dependable front torque mounting solution.