Images may be for reference only
Product Details
Complete your fourth-generation Honda Accord manual transmission conversion with the Innovative Mounts Passenger-Side Transmission Conversion Mount (29325), specifically designed for 1990–1993 Honda Accord CB7/CB9 chassis applications originally equipped with an automatic transmission and being converted to a 1990–1993 F-Series manual transmission.
Converting a factory automatic Honda Accord to a manual transmission requires more than replacing the transmission itself. Differences between factory automatic and manual transmission mounting arrangements can prevent the new transmission from fitting correctly with the original chassis mounts.
The Innovative Mounts 29325 provides a purpose-built solution for this conversion, allowing a compatible early F-Series manual transmission to be supported in the factory automatic Accord chassis.
Designed for performance enthusiasts and Honda builders, this passenger-side transmission mount combines a conversion-specific mounting configuration with Innovative Mounts' specially engineered polyurethane bushing technology.
Compared with conventional factory rubber or hydraulic mounts, polyurethane provides increased resistance to drivetrain movement. This helps maintain more consistent engine and transmission positioning during acceleration, deceleration, and shifting.
Excessive drivetrain movement can contribute to inconsistent shifting feel, unwanted engine rocking, and conditions that promote wheel hop. The Innovative Mounts 29325 helps address these concerns by providing firmer transmission support.
The mount features Innovative Mounts' unique no-tear polyurethane bushing design, engineered to minimize unwanted drivetrain movement while providing vibration isolation appropriate to the selected bushing hardness.
Each mounting assembly is CAD/CAM designed and stress analyzed to deliver accurate fitment and durability for its intended application.
The most important fitment distinction is the transmission year and configuration. Innovative Mounts 29325 is specifically intended for conversions using a 1990–1993 F-Series manual transmission. Applications using a later 1994–2001 F-Series manual transmission or a compatible H-Series manual transmission require a different mounting solution, such as Innovative Mounts 29324.
Available in 75A, 85A, and 95A polyurethane bushing options, the 29325 allows enthusiasts to select the appropriate level of drivetrain rigidity for street performance, track use, or competition applications.
Whether you're restoring a CB7 Accord, converting your daily driver from automatic to manual, or building a modified F-Series performance vehicle, the Innovative Mounts 29325 provides the transmission mounting support needed for a properly executed conversion.
Features
Automatic-to-Manual Conversion Mount: Specifically designed for compatible 1990–1993 Honda Accord automatic-to-manual conversions.
Passenger-Side Transmission Mount: Replaces the transmission-side mounting arrangement for the supported conversion.
1990–1993 Honda Accord Compatibility: Engineered for fourth-generation Accord CB7/CB9 chassis applications.
Early F-Series Manual Transmission Compatibility: Designed specifically for 1990–1993 F-Series manual transmissions.
Factory Automatic Chassis Compatibility: Accommodates the mounting requirements of originally automatic Accord chassis.
Conversion-Specific Design: Provides a purpose-built solution rather than requiring an improvised transmission mount.
Performance-Oriented Construction: Designed to provide reliable drivetrain support.
Innovative No-Tear Polyurethane Bushing: Engineered to minimize unwanted engine and transmission movement.
Reduced Drivetrain Movement: Helps control excessive powertrain rocking during acceleration and shifting.
Improved Shifting Consistency: Firmer transmission support helps maintain more consistent drivetrain positioning.
Improved Drivetrain Response: Reduced mount deflection provides more predictable powertrain movement under load.
Reduced Wheel Hop: Helps control drivetrain movement that can contribute to wheel hop during hard acceleration.
Three Bushing Hardness Options: Available in 75A, 85A, and 95A configurations.
CAD/CAM Designed: Developed using computer-aided design for application-specific fitment.
Stress Analyzed: Engineered for strength and durability.
Lifetime Manufacturer Warranty: Backed by Innovative Mounts' lifetime warranty, subject to manufacturer terms.
Popular Performance Applications
1990–1993 Honda Accord Automatic-to-Manual Conversions
Provides the passenger-side transmission mounting solution for fourth-generation Accord owners converting from an automatic to an early F-Series manual transmission.
CB7 Accord Manual Swap Projects
An application-specific upgrade for CB7 sedan builds retaining a compatible F-Series engine.
CB9 Accord Wagon Conversions
Supports compatible CB9 wagon applications using the required early F-Series manual transmission configuration.
F22A Performance Builds
Provides firmer transmission support for modified F22A engines equipped with performance intake systems, headers, exhaust upgrades, and other modifications.
Naturally Aspirated F-Series Applications
Helps reduce unwanted drivetrain movement in modified F-Series engines producing increased horsepower and torque.
Turbocharged F-Series Builds
Provides increased resistance to transmission movement in compatible turbocharged F-Series applications.
Street Performance Builds
The 75A polyurethane bushing option provides increased drivetrain rigidity while maintaining some vibration isolation for street-oriented vehicles.
Autocross and Track Applications
The 85A bushing option provides firmer transmission support for demanding performance driving.
Drag Racing Applications
The 95A bushing option provides maximum resistance to drivetrain movement for dedicated competition vehicles.
Honda Accord Restoration and Performance Upgrades
An excellent option for owners completing a period-correct early F-Series manual transmission conversion while upgrading the original drivetrain mounting system.
Additional Information
- Manufacturer: Innovative Mounts
- Part Number: 29325
- Product Type: Passenger-Side Transmission Conversion Mount
- Mount Position: Passenger Side / Right-Hand Transmission Mount
- Primary Application: Automatic-to-Manual Transmission Conversion
- Vehicle Compatibility: 1990–1993 Honda Accord
- Chassis Compatibility: CB7 / CB9
- Engine Compatibility: Honda F-Series
- Transmission Compatibility: 1990–1993 F-Series Manual Transmission
- Bushing Material: Polyurethane
- Bushing Design: Innovative Mounts No-Tear Design
- Manufacturer-Listed Product Weight: Approximately 5 lbs
- Manufacturer Warranty: Lifetime Warranty, Subject to Manufacturer Terms
- Alternative Later F-Series / H-Series Transmission Mount: Innovative Mounts 29324
Available Polyurethane Bushing Hardness Options:
75A – Black: Street and performance configuration offering increased drivetrain rigidity. Manufacturer-recommended for approximately 250–400 HP.
85A – Gray: Track-oriented configuration providing firmer transmission support. Manufacturer-recommended for approximately 400–500 HP.
95A – Red: Race-oriented configuration offering maximum resistance to drivetrain movement. Manufacturer-recommended for applications exceeding 500 HP.
Bushing Selection Note: Horsepower ranges are general manufacturer recommendations rather than guaranteed capacity limits. Actual bushing selection should consider engine torque, intended vehicle use, and acceptable vibration levels.
Important Transmission Difference: Innovative Mounts 29325 is designed for 1990–1993 F-Series manual transmissions, while Innovative Mounts 29324 is intended for compatible later 1994–2001 F-Series and H-Series manual transmission conversion applications.
Common Reasons for Replacement or Upgrade
Automatic-to-Manual Transmission Conversion: Provides the required passenger-side mounting solution for a supported early F-Series manual swap.
Incorrect Factory Transmission Mount: Original automatic transmission mounting components may not accommodate the manual transmission.
Early F-Series Transmission Installation: Designed for the specific mounting configuration used by 1990–1993 F-Series manual transmissions.
Worn Factory Mounting Components: Provides a performance-oriented solution when upgrading the transmission mounting system.
Excessive Drivetrain Movement: Polyurethane bushings help minimize unwanted engine and transmission rocking.
Improved Shifting Consistency: Reduced transmission movement helps maintain more predictable shifting feel.
Wheel Hop During Acceleration: Firmer drivetrain support can help reduce conditions that contribute to wheel hop.
High-Horsepower F-Series Builds: Increased engine torque places additional demands on the transmission mounting system.
Improved Drivetrain Response: Reduced mount deflection helps maintain more consistent drivetrain positioning.
Performance Build Preparation: Provides an application-specific mounting component for compatible Honda Accord manual conversions.
Installation Notes
Verify Vehicle Compatibility: Confirm that the vehicle is a supported 1990–1993 Honda Accord CB7 or CB9 chassis.
Confirm Original Transmission Configuration: The Innovative Mounts 29325 is designed for compatible factory automatic chassis being converted to a manual transmission.
Identify the Manual Transmission: Verify that the transmission is a compatible 1990–1993 F-Series manual transmission.
Check Later Transmission Applications: If installing a 1994–2001 F-Series or compatible H-Series manual transmission, use the appropriate conversion mount, such as Innovative Mounts 29324.
Inspect Transmission Mounting Points: Confirm that the transmission case has the correct mounting provisions for the 29325.
Support the Engine and Transmission: Properly support the drivetrain before removing the original transmission mount.
Remove the Factory Mounting Components: Follow the appropriate Honda service procedures when removing the existing passenger-side transmission mounting components.
Inspect the Chassis Mounting Location: Check the mounting points and surrounding chassis structure for damage, corrosion, or previous modifications.
Position the Innovative Mounts 29325: Install the conversion mount at the designated passenger-side transmission mounting location.
Verify Hardware Compatibility: Use the correct mounting hardware specified for the vehicle and conversion. Replace damaged or worn fasteners.
Align the Drivetrain: Ensure that the engine and transmission are properly positioned before final tightening.
Avoid Bushing Preload: Confirm that the drivetrain is properly supported and aligned to prevent unnecessary stress on the polyurethane bushing.
Torque Mounting Hardware: Tighten all fasteners according to Innovative Mounts' installation instructions and applicable Honda service specifications.
Inspect Remaining Engine Mounts: Verify that the driver-side and rear engine mounts are compatible with the manual transmission conversion.
Verify Axle Alignment: Confirm that the drivetrain maintains proper axle positioning and clearance.
Check Shifter Operation: After completing the manual transmission conversion, verify proper gear engagement and shifter operation.
Inspect Surrounding Components: Check clearance around the transmission, exhaust system, suspension components, wiring, and chassis structure.
Select the Appropriate Bushing Hardness: Choose the polyurethane durometer that best matches the vehicle's intended use and acceptable vibration level.
Expect Increased Vibration: Performance polyurethane mounts may transmit more vibration into the chassis than factory rubber or hydraulic mounts, particularly with higher-durometer bushings.
Inspect After Installation: Recheck mounting hardware and drivetrain alignment after the initial driving period.
Professional Installation Recommended: Installation by an experienced Honda transmission conversion specialist is strongly recommended.
Confirm Fitment Before Bolting Down: Innovative Mounts states that mounts showing installation bolt impressions cannot be returned or exchanged. Verify all mounting requirements before installation.
What's Included
(1) Innovative Mounts 29325 Passenger-Side Transmission Conversion Mount
(1) Installed Polyurethane Bushing in the Selected Durometer
Important: This product is a single passenger-side transmission conversion mount, not a complete engine mount kit.
Additional engine mounts, transmissions, clutch components, pedals, shifter assemblies, axles, and other automatic-to-manual conversion components are not included.
Installation hardware should be verified against the manufacturer's current packaging and instructions before installation.
Complete your fourth-generation Honda Accord manual transmission conversion with the Innovative Mounts Passenger-Side Transmission Conversion Mount (29325), engineered for 1990–1993 CB7/CB9 chassis applications originally equipped with an automatic transmission and being converted to a compatible 1990–1993 F-Series manual transmission.
Featuring an application-specific conversion design, Innovative Mounts' no-tear polyurethane bushing technology, and multiple bushing hardness options, this mount provides improved drivetrain stability, reduced transmission movement, and dependable support for street and performance applications.
Whether you're converting your CB7 Accord to a manual transmission, building a modified F22A-powered street car, or upgrading your fourth-generation Accord drivetrain, Innovative Mounts delivers a purpose-built mounting solution for your project.
| Part Number: | 29325 |
| Brand: | Innovative Mounts |
| Color: | Black |
| Position: | Right (Passenger) |
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
| Year | Make | Model | Trim |
|---|---|---|---|
| 1990 | Honda | Accord | DX |
| 1990 | Honda | Accord | EX |
| 1990 | Honda | Accord | LX |
| 1991 | Honda | Accord | DX |
| 1991 | Honda | Accord | EX |
| 1991 | Honda | Accord | LX |
| 1991 | Honda | Accord | SE |
| 1992 | Honda | Accord | DX |
| 1992 | Honda | Accord | EX |
| 1992 | Honda | Accord | LX |
| 1993 | Honda | Accord | 10th Anniversary |
| 1993 | Honda | Accord | DX |
| 1993 | Honda | Accord | EX |
| 1993 | Honda | Accord | LX |
| 1993 | Honda | Accord | SE |
Reviews
No Reviews Yet!
Write a Review