Designed specifically for automatic-to-manual drivetrain conversions, this performance transmission mount provides the mounting configuration needed to install a compatible manual transmission into a factory automatic chassis.

Converting an automatic Honda Accord or Prelude to a manual transmission requires more than simply replacing the transmission. Factory automatic and manual transmission mounting arrangements can differ, creating challenges when positioning and securing the manual transmission within the original chassis.

The Innovative Mounts 29324 addresses this problem with a conversion-specific passenger-side transmission mount designed to accommodate the appropriate manual transmission mounting arrangement.

Rather than relying on improvised mounting solutions, the 29324 provides a purpose-built mounting component engineered for the chassis and transmission combination.

Constructed for performance applications, this mount features Innovative Mounts' specially engineered polyurethane bushing technology. Compared with aging factory rubber or hydraulic mounts, polyurethane provides increased resistance to drivetrain movement, helping maintain more consistent engine and transmission positioning during acceleration, deceleration, and shifting.

Innovative Mounts' unique no-tear bushing design is engineered to control unwanted drivetrain movement while providing vibration isolation appropriate to the selected bushing hardness.

Reducing excessive drivetrain movement can help improve shifting consistency, provide more predictable power delivery, and minimize conditions that contribute to wheel hop during aggressive acceleration.

The 29324 is CAD/CAM designed and stress analyzed to provide strength, durability, and accurate fitment for supported Honda automatic-to-manual conversion applications.

Available in multiple polyurethane bushing hardness options, the Innovative Mounts 29324 allows enthusiasts to select the appropriate balance between street-driving comfort and performance-oriented drivetrain rigidity.

Whether you're converting your CB7 Accord to an H22 manual drivetrain, completing an F-Series manual swap in a CD-chassis Accord, or installing a compatible H-Series manual transmission into your Prelude, the Innovative Mounts 29324 provides a dependable passenger-side transmission mounting solution.

Features

• Automatic-to-Manual Conversion Mount: Designed to accommodate compatible manual transmissions in originally automatic Honda chassis.

• Passenger-Side Transmission Mount: Replaces the corresponding transmission-side mounting arrangement during a supported conversion.

• Honda Accord Compatibility: Supports specified 1990–1997 Honda Accord conversion applications.

• Honda Prelude Compatibility: Designed for specified 1992–1996 Honda Prelude automatic-to-manual conversions.

• H-Series Manual Transmission Compatibility: Supports compatible Honda H-Series manual transmissions.

• 1994–2001 F-Series Manual Transmission Compatibility: Designed for supported later F-Series manual transmission configurations.

• Conversion-Specific Design: Provides a purpose-built mounting solution for compatible factory automatic chassis.

• Performance-Oriented Construction: Engineered for increased drivetrain support and durability.

• No-Tear Polyurethane Bushing: Helps control excessive drivetrain movement while providing vibration isolation.

• Reduced Transmission Movement: Helps minimize unwanted powertrain movement during acceleration and shifting.

• Improved Shifting Consistency: Firmer bushings help maintain more consistent drivetrain positioning under load.

• Reduced Wheel Hop: Helps control drivetrain movement that can contribute to wheel hop during hard acceleration.

• Multiple Bushing Hardness Options: Available in 60A, 75A, 85A, and 95A configurations.

• CAD/CAM Designed: Developed using computer-aided design for accurate fitment.

• Stress Analyzed: Engineered for demanding performance applications.

• Lifetime Manufacturer Warranty: Backed by Innovative Mounts' lifetime warranty, subject to manufacturer terms.

Popular Performance Applications

1990–1993 Honda Accord H22 Swaps

Provides the passenger-side transmission mounting solution for compatible H22 manual drivetrain conversions in the fourth-generation Accord chassis.

1994–1997 Honda Accord Manual Conversions

Designed for compatible fifth-generation Accord applications originally equipped with an automatic transmission and converted to a manual F-Series or H-Series drivetrain.

1992–1996 Honda Prelude Manual Conversions

Provides a conversion-specific transmission mounting solution for compatible fourth-generation Prelude automatic-to-manual swaps.

H22A VTEC Engine Swaps

Suitable for supported H22A engine and manual transmission combinations installed in compatible Accord and Prelude chassis.

H23 Manual Transmission Applications

Supports compatible H23 drivetrain configurations using the appropriate H-Series manual transmission.

1994–2001 F-Series Manual Transmission Swaps

Provides the passenger-side transmission mounting arrangement for supported later F-Series manual transmission conversions.

Naturally Aspirated Performance Builds

Helps reduce unwanted drivetrain movement in modified F-Series and H-Series applications.

Turbocharged F-Series and H-Series Builds

Provides increased resistance to transmission movement in compatible forced-induction applications.

Street Performance Applications

The 60A and 75A bushing options provide different levels of drivetrain rigidity for street-oriented vehicles.

Autocross and Track Applications

The 85A bushing option provides increased resistance to drivetrain movement during aggressive acceleration, braking, and cornering.

Drag Racing Applications

The 95A bushing option offers maximum resistance to drivetrain movement for dedicated competition vehicles.

Additional Information

• Manufacturer: Innovative Mounts
• Part Number: 29324
• Product Type: Passenger-Side Transmission Conversion Mount
• Mount Position: Passenger Side / Right-Hand Transmission Mount
• Primary Application: Automatic-to-Manual Transmission Conversion
• Vehicle Compatibility: Selected 1990–1997 Honda Accord and 1992–1996 Honda Prelude Applications
• Chassis Compatibility: CB / CD / CE / BB, subject to drivetrain configuration
• Engine Compatibility: Compatible Honda F-Series and H-Series
• Transmission Compatibility: H-Series Manual / 1994–2001 F-Series Manual
• Bushing Material: Polyurethane
• Bushing Design: Innovative Mounts No-Tear Design
• Manufacturer-Listed Weight: Approximately 5 lbs
• Manufacturer Warranty: Lifetime Warranty, Subject to Manufacturer Terms
• Alternative Early F-Series Transmission Mount: Innovative Mounts 29325

Available Polyurethane Bushing Hardness Options:

• 60A – Red: Street-oriented configuration offering the greatest vibration isolation among the available options. Manufacturer-recommended for applications up to approximately 250 HP.

• 75A – Black: Street and performance configuration offering increased drivetrain rigidity. Manufacturer-recommended for approximately 250–400 HP.

• 85A – Gray: Track-oriented configuration designed to further reduce drivetrain movement. Manufacturer-recommended for approximately 400–500 HP.

• 95A – Red: Race-oriented configuration providing maximum resistance to drivetrain movement. Manufacturer-recommended for applications exceeding 500 HP.

Bushing Selection Note: Manufacturer horsepower ranges are general selection recommendations rather than guaranteed capacity limits. Consider engine torque, intended vehicle use, and acceptable vibration levels when selecting a bushing hardness.

Transmission Generation Note: The distinction between Innovative Mounts 29324 and 29325 is especially important for fourth-generation Accord conversions. The correct mount depends on the manual transmission being installed, not simply the model year of the vehicle.

Common Reasons for Replacement or Upgrade

• Automatic-to-Manual Transmission Conversion: Provides the required passenger-side transmission mounting solution for supported manual swaps.

• H-Series Engine and Transmission Swap: Helps position a compatible H-Series manual drivetrain in an originally automatic Accord or Prelude chassis.

• Later F-Series Manual Transmission Conversion: Designed for compatible 1994–2001 F-Series manual transmissions.

• Incorrect Factory Transmission Mount: Original automatic transmission mounts may not match the mounting arrangement required by the manual transmission.

• Excessive Drivetrain Movement: Polyurethane bushings help reduce unwanted engine and transmission movement.

• Worn Factory Rubber Mounts: Provides a performance-oriented mounting alternative for compatible conversion applications.

• Improved Shifting Consistency: Reduced transmission movement can help maintain more predictable shifting feel.

• Wheel Hop During Acceleration: Firmer mounting support can help reduce drivetrain movement that contributes to wheel hop.

• High-Horsepower F-Series or H-Series Builds: Increased engine torque places additional demands on the mounting system.

• Improved Drivetrain Response: Reduced mount deflection helps maintain more consistent powertrain positioning.

• Performance Build Preparation: Provides a purpose-built mounting component for supported manual drivetrain conversions.

Installation Notes

1. Verify Chassis Compatibility: Confirm that the vehicle uses a supported Honda Accord or Prelude chassis and mounting configuration.

2. Confirm the Original Transmission Configuration: The Innovative Mounts 29324 is intended for supported automatic-to-manual transmission conversions.

3. Identify the Manual Transmission: Verify whether the transmission is a compatible H-Series manual or 1994–2001 F-Series manual transmission.

4. Check Early F-Series Transmissions: If installing a 1990–1993 F-Series manual transmission in a fourth-generation Accord, use the appropriate Innovative Mounts 29325 instead.

5. Inspect the Transmission Mounting Points: Verify that the transmission case has the correct mounting provisions for the conversion mount.

6. Support the Engine and Transmission: Properly support the drivetrain before removing the original passenger-side transmission mount.

7. Remove the Factory Mounting Components: Follow the appropriate Honda service procedures when removing the existing mount.

8. Inspect the Chassis Mounting Location: Check the mounting points and surrounding chassis structure for damage, corrosion, or previous modifications.

9. Position the Innovative Mounts 29324: Install the conversion mount at the designated passenger-side transmission mounting location.

10. Check Hardware Compatibility: Use the correct mounting hardware specified for the vehicle and conversion. Replace damaged or worn fasteners.

11. Align the Drivetrain: Confirm that the engine and transmission are positioned correctly before final tightening.

12. Avoid Bushing Preload: Ensure the drivetrain is properly supported and aligned to prevent unnecessary stress on the polyurethane bushing.

13. Torque Mounting Hardware: Tighten all fasteners according to the manufacturer's instructions and applicable Honda service specifications.

14. Inspect Remaining Engine Mounts: Verify that the driver-side and rear engine mounts are compatible with the engine and transmission conversion.

15. Verify Axle Alignment: Confirm that the installed drivetrain maintains appropriate axle positioning and clearance.

16. Check Shifter Operation: After completing the manual conversion, verify proper transmission engagement and shifter operation.

17. Inspect Surrounding Components: Check clearance around the transmission, exhaust system, suspension, wiring, and chassis structure.

18. Select the Appropriate Bushing Hardness: Choose the polyurethane durometer that best matches the vehicle's intended use and acceptable vibration level.

19. Expect Increased Vibration: Performance polyurethane mounts may transmit more vibration into the chassis than factory rubber or hydraulic mounts, particularly with higher-durometer bushings.

20. Inspect After Installation: Recheck mounting hardware and drivetrain alignment after the initial driving period.

21. Professional Installation Recommended: Installation by an experienced Honda engine swap or transmission conversion specialist is strongly recommended.

22. Confirm Fitment Before Bolting Down: Innovative Mounts states that mounts showing installation bolt impressions cannot be returned or exchanged. Verify all mounting requirements before installation.

What's Included

• (1) Innovative Mounts 29324 Passenger-Side Transmission Conversion Mount

• (1) Installed Polyurethane Bushing in the Selected Durometer

Important: This product is a single passenger-side transmission conversion mount, not a complete three-piece engine mount kit.

Additional engine mounts, transmission components, shifter assemblies, clutch components, axles, and other automatic-to-manual conversion parts are not included.

Installation hardware should be verified against the manufacturer's current packaging and instructions before installation.

Complete your Honda manual transmission conversion with the Innovative Mounts Passenger-Side Transmission Conversion Mount (29324), engineered for compatible 1990–1997 Honda Accord and 1992–1996 Honda Prelude applications using H-Series manual transmissions or 1994–2001 F-Series manual transmissions.

Featuring a conversion-specific design, Innovative Mounts' no-tear polyurethane bushing technology, and multiple bushing hardness options, this mount provides improved drivetrain stability, reduced transmission movement, and dependable support for demanding street and performance applications.

Whether you're converting your Accord from automatic to manual, installing an H22 drivetrain, or completing a compatible F-Series or H-Series performance build, Innovative Mounts delivers a purpose-built mounting solution for your project.