Improve drivetrain stability and reduce excessive engine movement with the Innovative Mounts Front Torque Engine Mount & Bracket (19144), specifically designed for 1990–1993 Acura Integra DA chassis applications equipped with a B-Series engine, cable-operated manual transmission, and the Innovative Mounts 59311 Competition Traction Bar.

Engineered for performance-oriented Acura Integra builds, this front torque mounting assembly provides additional drivetrain support to help minimize unwanted engine movement during acceleration, deceleration, and aggressive shifting.

The second-generation Acura Integra remains a popular platform for naturally aspirated and forced-induction B-Series performance builds. However, increased horsepower, torque, and traction can place additional demands on the factory engine mounting system.

Excessive drivetrain movement can contribute to wheel hop, inconsistent shifting feel, and unnecessary stress on surrounding drivetrain components. These issues become particularly noticeable during hard launches and high-load driving.

Innovative Mounts addresses these concerns with a durable steel mounting bracket and specially engineered polyurethane torque mount. Designed to work with the Innovative Mounts 59311 B-Series Competition Traction Bar, the 19144 adds a front torque mounting point to compatible Integra applications.

Unlike conventional factory rubber mounting components, Innovative Mounts' performance-oriented polyurethane bushings provide increased resistance to drivetrain deflection. The manufacturer's unique no-tear bushing design helps control engine movement while minimizing binding and progressively absorbing vibration.

The Innovative Mounts 19144 is CAD/CAM designed, stress analyzed, and engineered for bolt-on installation with the required traction bar system. Installation hardware is included for the intended mounting configuration.

Available in multiple polyurethane bushing hardness options, this assembly allows enthusiasts to select the appropriate balance between everyday driving comfort and competition-oriented drivetrain rigidity.

Whether you're upgrading a naturally aspirated B18A-powered Integra LS, improving traction in a turbocharged B-Series build, or completing an Innovative Mounts traction bar installation, the Innovative Mounts 19144 Front Torque Engine Mount & Bracket provides additional drivetrain support for demanding street and competition applications.

Features

• Front Torque Engine Mount & Bracket: Adds an additional front torque mounting point to compatible second-generation Acura Integra applications.

• 1990–1993 Acura Integra Compatibility: Designed for supported DA chassis configurations.

• B-Series Engine Compatibility: Engineered for compatible Honda/Acura B-Series engine installations.

• Cable Transmission Applications: Designed for supported B-Series cable-operated manual transmissions.

• Innovative Mounts Traction Bar Compatibility: Specifically designed for the Innovative Mounts 59311 B-Series Competition Traction Bar.

• Heavy-Duty Steel Construction: Durable mounting bracket engineered for increased strength and drivetrain support.

• Reduced Engine Movement: Helps minimize excessive engine rocking during acceleration, deceleration, and shifting.

• Improved Drivetrain Stability: Provides additional support to maintain more consistent engine positioning under load.

• Reduced Wheel Hop: Helps control drivetrain movement that can contribute to wheel hop during aggressive acceleration.

• Improved Shifting Consistency: Reduced drivetrain movement can help maintain more consistent engine positioning during gear changes.

• Innovative No-Tear Polyurethane Bushings: Engineered for durability and controlled vibration isolation.

• Tapered Bushing Design: Helps minimize binding while progressively absorbing engine movement and vibration.

• Multiple Bushing Hardness Options: Available in 60A, 75A, 85A, and 95A configurations.

• Bolt-On Installation: Designed for installation with the specified Innovative Mounts traction bar.

• Installation Hardware Included: Supplied with manufacturer-provided mounting hardware.

• CAD/CAM Designed: Developed using computer-aided design for accurate fitment and manufacturing consistency.

• Stress Analyzed: Engineered for demanding street and performance driving conditions.

• Street and Competition Applications: Suitable for modified street vehicles, autocross builds, track cars, and drag racing applications.

• Lifetime Manufacturer Warranty: Backed by Innovative Mounts' lifetime warranty, subject to manufacturer terms.

Popular Performance Applications

1990–1993 Acura Integra LS Performance Builds

An excellent upgrade for B18A1-powered Integra LS applications requiring additional front torque mounting support.

1990–1993 Acura Integra RS and GS Builds

Provides additional drivetrain stability for compatible B-Series-powered Integra RS and GS applications.

1992–1993 Acura Integra GS-R Builds

Suitable for compatible B17A1-powered GS-R applications equipped with the required Innovative Mounts traction bar.

Naturally Aspirated B-Series Performance Builds

Helps reduce unwanted drivetrain movement in vehicles equipped with performance intake systems, upgraded camshafts, exhaust systems, and other naturally aspirated modifications.

Turbocharged B18 Applications

Provides additional engine support for compatible turbocharged B18A and B18B engine configurations where increased torque places additional stress on the mounting system.

Innovative Mounts Traction Bar Installations

Designed specifically for enthusiasts adding a front torque mount to the Innovative Mounts 59311 B-Series Competition Traction Bar.

Street Performance Applications

The 60A and 75A polyurethane bushing configurations provide increased drivetrain control while retaining some vibration isolation for performance-oriented street vehicles.

Autocross and Track Builds

Higher-durometer polyurethane bushings help maintain more consistent drivetrain positioning during aggressive acceleration, braking, and cornering.

Drag Racing Applications

The 85A and 95A bushing configurations provide increased resistance to drivetrain movement during hard launches and high-load shifting.

Additional Information

• Manufacturer: Innovative Mounts
• Part Number: 19144
• Product Type: Front Torque Engine Mount & Bracket
• Mounting Position: Front Torque Mount
• Mount Construction: Steel
• Bushing Material: Polyurethane
• Number of Mount Assemblies: 1
• Primary Vehicle Application: 1990–1993 Acura Integra
• Chassis Compatibility: DA / DB, subject to mounting configuration
• Engine Compatibility: Honda/Acura B-Series
• Transmission Compatibility: B-Series Cable Manual Transmission
• Required Traction Bar: Innovative Mounts 59311
• Installation Type: Bolt-On with Compatible Traction Bar
• Manufacturer-Listed Product Weight: Approximately 3 lbs
• Manufacturer Warranty: Lifetime Warranty, Subject to Manufacturer Terms

Available Polyurethane Bushing Hardness Options:

• 60A – Red: Street-oriented configuration offering the greatest vibration isolation among the available options. Manufacturer-recommended for applications up to approximately 250 HP.

• 75A – Black: Street and performance configuration offering increased drivetrain rigidity. Manufacturer-recommended for approximately 250–400 HP.

• 85A – Gray: Track and competition-oriented configuration designed to further reduce drivetrain movement. Manufacturer-recommended for approximately 400–500 HP.

• 95A – Red: Extreme race-oriented configuration providing maximum resistance to drivetrain movement. Manufacturer-recommended for applications exceeding 500 HP.

Bushing Selection Note: Horsepower ranges are general manufacturer recommendations rather than guaranteed capacity limits. Actual bushing selection should consider engine torque, vehicle use, drivetrain configuration, and acceptable vibration levels.

Important Compatibility Note: Innovative Mounts 19144 is designed for 1990–1993 Acura Integra B-Series applications using the specified 59311 traction bar. It should not be confused with Innovative Mounts 19143, which is intended for 1988–1991 Honda Civic and CRX B-Series applications.

Common Reasons for Replacement or Upgrade

• Excessive Engine Movement: Additional front torque mounting support helps reduce unwanted engine rocking during acceleration and deceleration.

• Innovative Mounts Traction Bar Installation: Provides the front torque mounting assembly needed when adding this mounting point to the 59311 traction bar.

• Wheel Hop During Acceleration: Reduced drivetrain movement can help minimize conditions that contribute to wheel hop.

• High-Horsepower B-Series Builds: Increased engine torque places additional demands on factory and aftermarket mounting components.

• Improved Drivetrain Response: Firmer polyurethane bushings reduce unwanted engine movement under load.

• Improved Shifting Consistency: Reduced drivetrain movement can help maintain more consistent shifting feel during aggressive driving.

• Aggressive Street Driving: Additional mounting support helps maintain more consistent drivetrain positioning.

• Track and Competition Use: Performance polyurethane bushings provide increased resistance to engine movement.

• Turbocharged B-Series Applications: Provides additional support for compatible forced-induction engine configurations.

• Worn or Damaged Mounting Components: Replaces a compatible deteriorated front torque mounting assembly.

• Drivetrain Stability Improvements: Helps provide a more controlled engine mounting arrangement when used with the required traction bar.

Installation Notes

1. Verify Vehicle Compatibility: Confirm that the vehicle is a compatible 1990–1993 Acura Integra.

2. Confirm Engine Configuration: Innovative Mounts 19144 is designed for compatible B-Series engine applications. It is not compatible with D-Series engines.

3. Verify Transmission Compatibility: Confirm that the vehicle uses a supported B-Series cable-operated manual transmission.

4. Confirm Traction Bar Compatibility: This assembly requires the Innovative Mounts 59311 B-Series Competition Traction Bar.

5. Inspect Existing Mounting Components: Check the engine mounting brackets, transmission mounts, chassis mounting points, and traction bar for damage or excessive wear.

6. Support the Engine and Transmission: Properly support the drivetrain before loosening or removing existing mounting components.

7. Position the Front Torque Mount Bracket: Install the supplied bracket according to Innovative Mounts' instructions, ensuring correct orientation and alignment.

8. Install the Polyurethane Torque Mount: Position the mount assembly in the designated location on the compatible traction bar.

9. Use the Supplied Hardware: Install the manufacturer-provided mounting bolts and hardware in their designated locations.

10. Inspect Factory Hardware: Examine any original fasteners designated for reuse. Replace damaged or excessively worn hardware.

11. Align the Drivetrain: Ensure the engine and transmission are properly positioned before final tightening to prevent unnecessary bushing preload.

12. Torque Mounting Hardware: Tighten all fasteners according to Innovative Mounts' installation instructions and applicable Acura service specifications.

13. Verify Traction Bar Clearance: Inspect clearance around the front torque mount, traction bar, engine, transmission, exhaust components, and surrounding chassis structure.

14. Check Engine Movement: Verify that the installed mount provides the intended drivetrain support without contacting surrounding components.

15. Select the Appropriate Bushing Hardness: Choose the polyurethane durometer that best matches the vehicle's horsepower level, intended use, and acceptable vibration.

16. Expect Increased Engine Vibration: Performance polyurethane mounts generally transmit more vibration into the chassis than softer factory rubber mounts. Higher-durometer bushings typically increase vibration further.

17. Inspect After Installation: Recheck mounting hardware, bracket alignment, and surrounding component clearances after the initial driving period.

18. Professional Installation Recommended: Installation by an experienced Honda/Acura technician or performance automotive specialist is strongly recommended.

19. Confirm Fitment Before Bolting Down: Innovative Mounts states that mounts showing installation bolt impressions cannot be returned or exchanged. Verify all mounting requirements before installation.

What's Included

• (1) Innovative Mounts Front Torque Engine Mount Assembly – 19144

• (1) Front Torque Mounting Bracket

• (1) Polyurethane Bushing Assembly in the Selected Durometer

• Manufacturer-Supplied Installation Hardware

Important: This product is a single front torque engine mount and bracket assembly, not a complete engine mount kit.

The Innovative Mounts 59311 B-Series Competition Traction Bar is required and sold separately, unless specifically included in another package.

This mount is designed for compatible B-Series applications and will not work with D-Series engines.

Improve drivetrain stability in your second-generation Acura Integra with the Innovative Mounts Front Torque Engine Mount & Bracket (19144), engineered for compatible 1990–1993 DA chassis applications equipped with B-Series engines and cable-operated manual transmissions.

Designed specifically for use with the Innovative Mounts 59311 B-Series Competition Traction Bar, this performance mounting assembly features durable steel construction, Innovative Mounts' no-tear polyurethane bushings, and multiple bushing hardness options to help reduce engine movement and improve drivetrain response.

Whether you're upgrading a naturally aspirated B18A-powered Integra LS, building a turbocharged B-Series Integra, or completing your Innovative Mounts traction bar installation, the 19144 provides additional engine support for demanding street and competition applications.