Upgrade your first-generation Honda Fit or Jazz with the Innovative Mounts Steel Replacement Engine Mount Kit (10850), designed for 2007–2008 USDM Honda Fit models and compatible 2005–2008 international Honda Fit/Jazz GD3 applications equipped with L-Series engines and manual transmissions.

Engineered to improve drivetrain stability, reduce excessive engine movement, and provide increased durability compared with aging factory rubber engine mounts, this performance-oriented three-piece replacement kit is an excellent upgrade for daily-driven vehicles, modified street cars, and dedicated performance builds.

Factory Honda engine mounts are designed primarily to isolate engine vibration and maintain passenger comfort. Over time, original rubber mounting components can deteriorate, crack, or separate, allowing excessive engine and transmission movement during acceleration, deceleration, and gear changes.

This unwanted movement becomes particularly noticeable in modified L-Series applications where increased horsepower and torque place additional stress on the factory mounting system. Excessive drivetrain movement can contribute to wheel hop, inconsistent shifting feel, and unnecessary stress on surrounding components.

Innovative Mounts addresses these limitations with heavy-duty steel mounting assemblies and specially engineered polyurethane bushings. The upgraded design helps maintain more consistent engine and transmission positioning under load, reducing drivetrain deflection and improving overall responsiveness.

The Innovative Mounts 10850 includes replacement mounts for the driver-side, passenger-side, and rear engine mounting positions. By upgrading all three mounting locations together, the kit provides a coordinated solution for reducing unwanted drivetrain movement.

Unlike conventional factory rubber mounts, Innovative Mounts' performance-oriented polyurethane bushings provide a firmer connection between the drivetrain and chassis. The company's unique no-tear bushing design is engineered to minimize binding while progressively absorbing engine movement and vibration.

Each mount is CAD/CAM designed and stress analyzed for strength, durability, and precise fitment. The kit is designed as a direct bolt-in replacement for compatible factory mounting locations, requiring no hood trimming or notching.

Available in multiple polyurethane bushing hardness options, the Innovative Mounts 10850 allows enthusiasts to select the appropriate balance between everyday driving comfort and performance-oriented drivetrain rigidity.

Whether you're replacing worn factory mounts on your Honda Fit Sport, improving shifting consistency in your manual-transmission Jazz, or preparing an L-Series-powered performance build for additional horsepower, the Innovative Mounts 10850 delivers the strength, durability, and drivetrain control needed for demanding applications.

Features

• Complete Three-Mount Replacement Kit: Includes driver-side, passenger-side, and rear engine mounts.

• Heavy-Duty Steel Construction: Durable steel mounting assemblies engineered for increased strength and long-term performance.

• First-Generation Honda Fit/Jazz Compatibility: Designed for compatible GD3 chassis applications.

• L-Series Engine Compatibility: Engineered for factory-style L-Series engine mounting configurations.

• Manual Transmission Specific: Designed for vehicles equipped with compatible factory manual transmissions.

• Direct Bolt-In Replacement: Installs in the supported factory mounting locations without extensive chassis modifications.

• Reduced Engine Movement: Helps minimize excessive engine rocking during acceleration, deceleration, and shifting.

• Improved Drivetrain Response: Firmer polyurethane bushings reduce unwanted drivetrain deflection under load.

• Improved Shifting Consistency: Reduced drivetrain movement can help maintain more consistent shifting feel during aggressive driving.

• Reduced Wheel Hop: Helps control engine movement that can contribute to wheel hop during hard acceleration.

• Innovative No-Tear Polyurethane Bushings: Engineered for durability and controlled vibration isolation.

• Tapered Bushing Design: Helps minimize binding while progressively absorbing drivetrain movement.

• Multiple Bushing Hardness Options: Available in 75A, 85A, and 95A configurations, with a 60A option listed by select retailers.

• No Hood Modifications Required: Designed to install without trimming or notching the factory hood.

• CAD/CAM Designed: Developed using computer-aided design for accurate fitment and manufacturing consistency.

• Stress Analyzed: Engineered to withstand demanding street and performance driving conditions.

• Street and Competition Applications: Suitable for modified daily drivers, autocross vehicles, and track-oriented builds.

• Lifetime Manufacturer Warranty: Backed by Innovative Mounts' lifetime warranty, subject to manufacturer terms.

Popular Performance Applications

2007–2008 Honda Fit Sport Performance Builds

An excellent upgrade for Fit Sport owners seeking improved drivetrain stability and reduced engine movement compared with deteriorated factory mounts.

First-Generation Honda Jazz Performance Builds

Provides improved engine and transmission support for compatible international GD3 Jazz applications equipped with L-Series engines and manual transmissions.

Naturally Aspirated L15 Performance Builds

Suitable for vehicles equipped with performance intake systems, upgraded exhaust components, engine management, and other naturally aspirated modifications.

Turbocharged L-Series Applications

Helps control excessive drivetrain movement in compatible turbocharged L15 builds where increased torque places additional stress on factory mounting components.

Supercharged Honda Fit Applications

Provides firmer drivetrain support for compatible supercharged L-Series configurations producing increased horsepower and torque.

Street Performance Applications

The available 75A polyurethane bushings provide increased drivetrain rigidity while retaining some vibration isolation for performance-oriented street vehicles.

Autocross and Track Builds

Higher-durometer polyurethane bushings help maintain more consistent drivetrain positioning during aggressive acceleration, braking, and cornering.

Drag Racing Applications

The 85A and 95A bushing configurations provide increased resistance to engine movement during hard launches and high-load shifting.

Factory Engine Mount Replacement

An excellent performance-oriented alternative for replacing worn, cracked, or deteriorated original engine mounts.

Additional Information

• Manufacturer: Innovative Mounts
• Part Number: 10850
• Product Type: Steel Replacement Engine Mount Kit
• Mount Construction: Steel
• Bushing Material: Polyurethane
• Number of Engine Mounts: 3
• Mounting Positions: Driver Side / Passenger Side / Rear
• Primary Vehicle Application: 2007–2008 Honda Fit 1.5L Manual Transmission
• Additional Manufacturer-Listed Application: 2005–2008 Honda Fit/Jazz GD3 Manual Transmission
• Chassis Compatibility: GD3
• Engine Compatibility: Honda L-Series
• Primary USDM Engine Code: L15A1
• Transmission Compatibility: Manual Only
• Installation Type: Direct Bolt-In Factory Replacement
• Hood Modification Required: No
• Manufacturer-Listed Weight: Approximately 13 lbs
• Manufacturer Warranty: Lifetime Warranty, Subject to Manufacturer Terms

Individual Mount Components:

• 10810: Driver-Side Mount

• 10820: Passenger-Side Mount

• 10820-SB: Passenger-Side Mounting Bracket

• 10830: Rear Engine Mount

Available Polyurethane Bushing Hardness Options:

• 60A – Street: Softer polyurethane configuration designed to prioritize vibration isolation and everyday driving comfort. Availability should be confirmed before ordering.

• 75A – Black: Street and performance configuration offering increased drivetrain rigidity. Manufacturer-recommended for approximately 250–400 HP.

• 85A – Gray: Track and performance-oriented configuration designed to further reduce drivetrain movement. Manufacturer-recommended for approximately 400–500 HP.

• 95A – Red: Race-oriented configuration designed for maximum drivetrain control. Manufacturer-recommended for applications exceeding 500 HP.

Bushing Selection Note: Manufacturer horsepower recommendations are general selection guidelines rather than guaranteed capacity limits. Actual bushing selection should consider engine torque, vehicle use, drivetrain configuration, and acceptable vibration levels.

Common Reasons for Replacement

• Worn Factory Engine Mounts: Aging rubber mounting components can deteriorate, crack, or separate, allowing excessive drivetrain movement.

• Excessive Engine Rocking: Unwanted engine movement during acceleration and deceleration can negatively affect vehicle response.

• Engine Movement During Shifting: Firmer polyurethane bushings help maintain more consistent drivetrain positioning during gear changes.

• Wheel Hop During Acceleration: Reduced drivetrain movement can help minimize conditions that contribute to wheel hop.

• High-Horsepower L-Series Builds: Increased engine torque places additional stress on factory mounting components.

• Broken or Damaged Mount Bushings: Replace deteriorated factory rubber mounts with durable polyurethane alternatives.

• Improved Shifting Consistency: Reduced engine and transmission movement can help improve shifting feel under load.

• Improved Drivetrain Response: Reduced mount deflection provides a more direct connection between engine output and vehicle movement.

• Coordinated Mount Replacement: Replacing all three primary mounts together helps eliminate unwanted movement caused by deteriorated factory components.

• Street and Track Performance: Improve drivetrain stability during demanding driving conditions.

• Long-Term Drivetrain Maintenance: Replace aging original engine mounts with a performance-oriented mounting system.

Installation Notes

1. Verify Vehicle Compatibility: Confirm that the vehicle is a compatible first-generation Honda Fit or Jazz equipped with an L-Series engine and factory manual transmission.

2. Confirm Chassis Configuration: Verify GD3 chassis compatibility. International Fit/Jazz model years and engine configurations may differ from USDM applications.

3. Verify Transmission Type: Innovative Mounts 10850 is designed for manual transmission applications only.

4. Support the Engine and Transmission: Properly support the drivetrain before removing the factory engine mounts to prevent unexpected movement or damage.

5. Remove Existing Engine Mounts: Follow the appropriate Honda service procedures when removing the original driver-side, passenger-side, and rear mounting components.

6. Inspect Factory Mounting Locations: Check the chassis mounting points, engine brackets, transmission brackets, and surrounding components for damage or excessive wear.

7. Install the Driver-Side Mount: Position the Innovative Mounts 10810 assembly in the corresponding factory mounting location.

8. Install the Passenger-Side Mount: Install the Innovative Mounts 10820 assembly and 10820-SB bracket according to the manufacturer's instructions.

9. Install the Rear Engine Mount: Position the Innovative Mounts 10830 assembly in the factory rear mounting location.

10. Inspect Factory Hardware: Examine original mounting bolts and fasteners before reuse. Replace damaged or excessively worn hardware.

11. Align the Drivetrain: Ensure the engine and transmission are properly positioned before final tightening to prevent unnecessary bushing preload.

12. Torque Mounting Hardware: Tighten all fasteners according to the applicable Honda and Innovative Mounts specifications.

13. Verify Component Clearance: Inspect clearance around the engine, transmission, exhaust system, intake components, axles, and surrounding chassis structure before operating the vehicle.

14. Select the Appropriate Bushing Hardness: Choose the polyurethane durometer that best matches the vehicle's horsepower level, intended use, and acceptable vibration.

15. Expect Increased Engine Vibration: Performance polyurethane mounts generally transmit more engine vibration into the chassis than factory rubber mounts. Higher-durometer bushings typically increase vibration further.

16. Inspect After Installation: Recheck mounting hardware, drivetrain alignment, and surrounding component clearances after the initial driving period.

17. Professional Installation Recommended: Installation by an experienced Honda technician is strongly recommended.

18. Confirm Fitment Before Bolting Down: Innovative Mounts states that mounts showing installation bolt impressions cannot be returned or exchanged. Verify all mounting requirements before installation.

What's Included

• (1) Driver-Side Engine/Transmission Mount – Innovative Mounts 10810

• (1) Passenger-Side Engine Mount – Innovative Mounts 10820

• (1) Passenger-Side Mounting Bracket – 10820-SB

• (1) Rear Engine Mount – Innovative Mounts 10830

• Polyurethane Bushings in the Selected Durometer

• Manufacturer-Supplied Mounting Components

Important: This product is a three-mount replacement engine mount kit designed for compatible first-generation Honda Fit/Jazz L-Series manual transmission applications. It is not a K-Series engine swap kit and is not compatible with factory automatic transmissions.

Factory mounting hardware may need to be reused. Confirm the exact supplied hardware and components for the selected product configuration before installation.

Upgrade your first-generation Honda Fit or Jazz with the Innovative Mounts Steel Replacement Engine Mount Kit (10850), engineered for compatible 2007–2008 USDM Honda Fit and 2005–2008 international Honda Fit/Jazz GD3 applications equipped with L-Series engines and manual transmissions.

Featuring heavy-duty steel construction, Innovative Mounts' no-tear polyurethane bushings, and multiple bushing hardness options, this complete three-mount replacement kit provides improved drivetrain stability, reduced engine movement, and more responsive power delivery.

Whether you're replacing worn factory engine mounts, upgrading your daily-driven Honda Fit Sport, or building a high-performance L-Series-powered Jazz, Innovative Mounts delivers the strength, durability, and drivetrain control enthusiasts demand.