Upgrade your Honda or Acura K-Series drivetrain with the Innovative Mounts Steel Front Engine Mount (10741), designed for 2003–2007 Honda Accord 2.4L and 2004–2008 Acura TSX applications equipped with K-Series engines and compatible manual or automatic transmissions.

Engineered to improve drivetrain stability, reduce excessive engine movement, and provide increased durability compared with aging factory rubber or hydraulic engine mounts, the Innovative Mounts 10741 is an excellent performance upgrade for daily-driven vehicles, modified street cars, and dedicated track builds.

Factory Honda and Acura engine mounts are designed primarily to isolate engine vibration and maintain everyday driving comfort. Over time, original rubber and hydraulic mounting components can deteriorate, crack, leak, or separate, allowing excessive engine movement during acceleration, deceleration, and gear changes.

This unwanted movement can become particularly noticeable in modified K-Series applications where increased horsepower and torque place additional stress on factory mounting components. Excessive drivetrain movement can contribute to wheel hop, inconsistent drivetrain response, and unnecessary stress on surrounding components.

Innovative Mounts addresses these limitations with a heavy-duty steel mounting assembly and specially engineered polyurethane bushings. The upgraded design helps maintain more consistent engine and transmission positioning under load, reducing unwanted drivetrain movement and providing a more direct driving experience.

Unlike factory fluid-filled mounts, the Innovative Mounts 10741 utilizes a performance-oriented polyurethane bushing system that eliminates the original hydraulic damping arrangement. The firmer construction helps reduce drivetrain deflection during acceleration and aggressive gear changes while providing vibration isolation appropriate to the selected bushing hardness.

Each mount is CAD/CAM designed and stress analyzed for strength, durability, and precise fitment. Available in multiple polyurethane bushing hardness options, the Innovative Mounts 10741 allows enthusiasts to select the appropriate balance between street comfort and performance-oriented drivetrain rigidity.

Whether you're replacing a worn front engine mount on your Honda Accord K24, improving drivetrain stability in your Acura TSX, or preparing your K-Series engine for additional horsepower, the Innovative Mounts 10741 provides the strength, durability, and performance needed for demanding applications.

Features

• Front Engine Mount Replacement: Designed for the front engine mounting position on compatible Honda Accord and Acura TSX applications.

• Heavy-Duty Steel Construction: Durable steel mounting components engineered for improved strength and long-term reliability.

• K-Series Engine Compatibility: Designed for compatible K24-powered Accord and TSX configurations.

• Manual and Automatic Transmission Compatibility: Supports compatible factory manual and automatic transmission applications.

• Reduced Engine Movement: Helps minimize excessive engine rocking during acceleration, deceleration, and shifting.

• Improved Drivetrain Response: Firmer polyurethane bushings reduce unwanted drivetrain deflection under load.

• Reduced Wheel Hop: Helps control drivetrain movement that can contribute to wheel hop during aggressive acceleration.

• Innovative No-Tear Polyurethane Bushings: Specially engineered for durability and vibration control.

• Hydraulic Mount Replacement: Eliminates the factory fluid-filled damping arrangement in applicable mounting configurations.

• Multiple Bushing Hardness Options: Available in 75A, 85A, and 95A polyurethane configurations.

• Factory Replacement Design: Replaces the original front engine mount on supported applications.

• CAD/CAM Designed: Developed using computer-aided design for consistent manufacturing and accurate fitment.

• Stress Analyzed: Engineered to withstand demanding street and performance driving conditions.

• Street and Competition Applications: Suitable for compatible modified street vehicles and performance builds.

• Complete Mount Kit Compatibility: Used as the front engine mount component in Innovative Mounts kit 10751.

• Lifetime Manufacturer Warranty: Backed by Innovative Mounts' lifetime warranty, subject to manufacturer terms.

Important Fitment Requirements:

• Designed specifically for the front engine mounting position.

• Intended for compatible K-Series-powered Honda Accord and Acura TSX applications.

• Not a complete engine mount kit.

• Not intended for rear, passenger-side, or driver-side transmission mounting positions.

• Not intended for factory V6-powered Honda Accord applications.

• Not intended for Honda Accord Hybrid applications.

• Not a universal K-Series engine swap mount.

• Verify the original front engine mount, transmission configuration, and OEM reference before installation.

Popular Performance Applications

2003–2007 Honda Accord K24 Performance Builds

An excellent upgrade for Accord owners seeking improved drivetrain stability and reduced engine movement compared with deteriorated factory mounts.

2004–2008 Acura TSX Performance Upgrades

Provides improved front engine support for K24A2-powered Acura TSX applications, helping minimize unwanted drivetrain movement during aggressive acceleration.

Naturally Aspirated K24 Builds

Suitable for K24 engines equipped with performance intake manifolds, upgraded camshafts, exhaust systems, engine management, and other naturally aspirated modifications.

Turbocharged K-Series Applications

Helps control excessive drivetrain movement in compatible turbocharged K24 builds where increased torque places additional stress on factory mounting components.

Supercharged K24 Performance Builds

Provides firmer front engine support for compatible supercharged applications producing increased horsepower and torque.

Street Performance Applications

The 75A polyurethane bushing option provides increased drivetrain rigidity while retaining some vibration isolation for performance-oriented street vehicles.

Track and Autocross Builds

Higher-durometer 85A and 95A polyurethane bushings provide increased resistance to drivetrain movement during aggressive acceleration, braking, and cornering.

Drag Racing Applications

Improved front engine support helps maintain more consistent drivetrain positioning during hard launches and high-load shifting.

Factory Front Engine Mount Replacement

An excellent performance-oriented alternative for replacing worn, cracked, or leaking original front engine mounts.

Additional Information

• Manufacturer: Innovative Mounts
• Part Number: 10741
• Product Type: Steel Front Engine Mount
• Mounting Position: Front
• Mount Construction: Steel
• Bushing Material: Polyurethane
• Number of Mounts: 1
• Primary Vehicle Applications: 2003–2007 Honda Accord 2.4L / 2004–2008 Acura TSX 2.4L
• Chassis Compatibility: Honda Accord CM / Acura TSX CL7/CL9
• Engine Compatibility: Honda K-Series 2.4L
• Transmission Compatibility: Manual / Automatic
• Installation Type: Factory Front Engine Mount Replacement
• Approximate Manufacturer-Listed Weight: 7 lbs
• Complete K-Series Mount Kit: Innovative Mounts 10751
• Manufacturer Warranty: Lifetime Limited Warranty

OEM Replacement Part Numbers:

• 50830-SDA-A04: Automatic Transmission

• 50830-SEA-E14: Manual Transmission

Available Polyurethane Bushing Hardness Options:

• 75A – Black: Street and performance configuration offering increased drivetrain rigidity. Manufacturer-recommended for approximately 250–400 HP.

• 85A – Gray: Track and performance-oriented configuration designed to reduce drivetrain movement. Manufacturer-recommended for approximately 400–500 HP.

• 95A – Red: Race-oriented configuration designed for maximum drivetrain control. Manufacturer-recommended for applications exceeding 500 HP.

Bushing Selection Note: Horsepower ranges are general manufacturer recommendations rather than guaranteed capacity limits. Actual selection should consider engine torque, vehicle use, drivetrain configuration, and acceptable vibration levels.

Common Reasons for Replacement

• Worn Factory Engine Mounts: Aging rubber and hydraulic mounts can deteriorate, crack, leak, or separate, allowing excessive drivetrain movement.

• Leaking Hydraulic Mounts: Factory fluid-filled mounting components can lose their vibration-control characteristics when damaged.

• Excessive Engine Rocking: Unwanted engine movement during acceleration and deceleration can negatively affect drivetrain response.

• Engine Movement During Shifting: Firmer polyurethane bushings help maintain more consistent engine positioning during gear changes.

• Wheel Hop During Acceleration: Reduced drivetrain movement can help limit conditions that contribute to wheel hop.

• High-Horsepower K24 Builds: Increased engine torque places additional stress on factory mounting components.

• Broken or Damaged Mount Bushings: Replace deteriorated factory rubber mounts with a durable polyurethane alternative.

• Improved Drivetrain Response: Reduced mount deflection provides a more direct connection between engine output and vehicle movement.

• Street and Track Performance: Improve engine stability during demanding driving conditions.

• Long-Term Drivetrain Maintenance: Replace an aging original front engine mount with a performance-oriented mounting assembly.

Installation Notes

1. Verify Vehicle Compatibility: Confirm that the vehicle is a compatible 2003–2007 Honda Accord 2.4L or 2004–2008 Acura TSX equipped with a supported K-Series engine.

2. Confirm Mounting Position: Innovative Mounts 10741 replaces the front engine mount. It is not intended for rear or passenger-side mounting positions.

3. Verify OEM Mount Compatibility: Compare the original front engine mount with the manufacturer's specified OEM replacement references.

4. Support the Engine and Transmission: Properly support the drivetrain before removing the factory front engine mount to prevent unexpected movement or damage.

5. Remove the Factory Front Engine Mount: Follow the appropriate Honda or Acura service procedures when removing the original mounting assembly.

6. Inspect Factory Mounting Locations: Check the chassis mounting points, engine brackets, transmission brackets, and surrounding components for damage or excessive wear.

7. Install the Innovative Mounts Assembly: Position the replacement front engine mount according to the manufacturer's instructions, ensuring correct orientation and alignment.

8. Inspect Factory Hardware: Examine original mounting bolts and fasteners before reuse. Replace damaged or excessively worn hardware.

9. Align the Drivetrain: Ensure the engine and transmission are properly positioned before final tightening to prevent unnecessary bushing preload.

10. Torque Mounting Hardware: Tighten all fasteners according to the applicable Honda/Acura and Innovative Mounts specifications.

11. Verify Component Clearance: Check clearance around the engine, transmission, exhaust system, cooling components, and surrounding chassis structure before operating the vehicle.

12. Select the Appropriate Bushing Hardness: Choose the polyurethane durometer that best matches the vehicle's horsepower level, intended use, and acceptable vibration.

13. Expect Increased Engine Vibration: Performance polyurethane mounts generally transmit more engine vibration into the chassis than factory rubber or hydraulic mounts. Higher-durometer bushings typically increase vibration further.

14. Inspect Other Engine Mounts: If the original front mount is worn or damaged, inspect the remaining factory engine and transmission mounts for deterioration.

15. Inspect After Installation: Recheck mounting hardware, drivetrain alignment, and surrounding component clearances after the initial driving period.

16. Professional Installation Recommended: Installation by an experienced Honda/Acura technician is strongly recommended.

17. Confirm Fitment Before Bolting Down: Innovative Mounts states that mounts showing installation bolt impressions cannot be returned or exchanged. Verify all mounting requirements before installation.

What's Included

• (1) Innovative Mounts Steel Front Engine Mount – Part Number 10741

• (1) Polyurethane Bushing Assembly in the Selected Durometer

• Manufacturer-Supplied Mount Components

Important: This product is a single front engine mount, not a complete engine mount kit. Rear, passenger-side, and other drivetrain mounts are sold separately unless specifically included in a complete mounting package.

The Innovative Mounts 10741 front engine mount is also included in the complete Innovative Mounts 10751 K-Series Replacement Engine Mount Kit.

Factory mounting hardware may need to be reused. Confirm the exact supplied hardware and components for the selected product configuration before installation.

Upgrade your Honda or Acura K-Series drivetrain with the Innovative Mounts Steel Front Engine Mount (10741), engineered for compatible 2003–2007 Honda Accord 2.4L and 2004–2008 Acura TSX applications equipped with K24 engines and manual or automatic transmissions.

Featuring durable steel construction, Innovative Mounts' no-tear polyurethane bushings, and multiple bushing hardness options, this performance replacement mount provides improved drivetrain stability, reduced engine movement, and more responsive power delivery.

Whether you're replacing a worn factory front engine mount, upgrading your daily-driven Accord K24, or building a high-performance Acura TSX, Innovative Mounts delivers the strength, durability, and drivetrain control enthusiasts demand.