Upgrade your Honda or Acura drivetrain with the Innovative Mounts Steel Rear Engine Mount (10730), a high-performance replacement designed for a variety of Honda and Acura vehicles equipped with compatible J-Series V6 engines and manual or automatic transmissions.

Engineered to provide improved drivetrain stability, reduced engine movement, and increased durability compared with aging factory rubber or hydraulic engine mounts, the Innovative Mounts 10730 is an excellent choice for daily-driven vehicles, modified street cars, and dedicated performance builds.

Factory Honda and Acura engine mounts are designed primarily to isolate engine vibration and provide a comfortable driving experience. Over time, the original rubber and hydraulic mounting components can deteriorate, crack, leak, or separate, allowing excessive engine movement during acceleration, deceleration, and shifting. This unwanted movement can become especially noticeable in higher-horsepower applications where additional engine torque places increased stress on factory mounting components.

Innovative Mounts addresses these limitations with a heavy-duty solid steel mounting assembly, billet accessories, and specially engineered polyurethane bushings. The upgraded design helps maintain more consistent engine and transmission positioning under load, reducing excessive drivetrain movement and improving overall driving response.

Unlike traditional fluid-filled factory mounts, the Innovative Mounts 10730 utilizes a performance-oriented polyurethane bushing system designed to provide increased resistance to drivetrain movement while retaining vibration isolation appropriate to the selected bushing hardness.

Each mount is CAD/CAM designed and stress analyzed for strength, durability, and precise fitment. Available in multiple polyurethane bushing hardness options, the Innovative Mounts 10730 allows enthusiasts to select the appropriate balance between everyday driving comfort and performance-oriented drivetrain rigidity.

Whether you're replacing a worn rear engine mount on your Honda Accord V6, improving drivetrain stability in your Acura TL Type-S, or preparing a J-Series engine for additional horsepower, the Innovative Mounts 10730 provides the strength and durability needed for demanding applications.

Features

• Rear Engine Mount Replacement: Designed for the rear engine mounting position on compatible Honda and Acura J-Series applications.

• Heavy-Duty Steel Construction: Solid steel mounting components engineered for increased strength and durability.

• Billet Accessories: Precision-machined components complement the steel mounting assembly.

• J-Series V6 Compatibility: Engineered for compatible Honda and Acura J-Series V6 engine configurations.

• Manual and Automatic Transmission Compatibility: Supports compatible factory manual and automatic transmission applications.

• Reduced Engine Movement: Helps minimize excessive engine rocking during acceleration, deceleration, and gear changes.

• Improved Drivetrain Response: Firmer polyurethane bushings reduce unwanted drivetrain deflection under load.

• Reduced Wheel Hop: Helps control drivetrain movement that can contribute to wheel hop during aggressive acceleration.

• Innovative No-Tear Polyurethane Bushings: Specially engineered for durability and vibration control.

• Multiple Bushing Hardness Options: Available in 75A, 85A, and 95A configurations.

• Factory Replacement Design: Replaces the original rear engine mount on supported applications.

• CAD/CAM Designed: Developed using computer-aided design for accurate fitment and consistent manufacturing.

• Stress Analyzed: Engineered to withstand demanding street and performance driving conditions.

• Performance-Oriented Construction: Suitable for modified street vehicles and competition applications.

• Lifetime Manufacturer Warranty: Backed by Innovative Mounts' lifetime warranty, subject to manufacturer terms.

Transmission Compatibility:

• Compatible Factory Manual Transmissions

• Compatible Factory Automatic Transmissions

Important Fitment Requirements:

• Designed specifically for the rear engine mounting position.

• Intended for the manufacturer-listed J-Series V6 applications.

• Not a complete engine mount kit.

• Not intended as a direct replacement for the front or passenger-side engine mounts.

• Odyssey fitment is restricted to the specified EX-L and EX-L Touring configurations.

• Confirm the vehicle's original mount part number and drivetrain configuration before installation.

Popular Performance Applications

2003–2007 Honda Accord V6 Performance Builds

An excellent upgrade for Accord V6 owners seeking improved drivetrain stability and reduced engine movement compared with deteriorated factory mounts.

2004–2008 Acura TL Performance Upgrades

Provides improved rear engine support for J32-powered Acura TL applications, helping minimize unwanted drivetrain movement during aggressive acceleration.

Acura TL Type-S J35 Performance Builds

Suitable for compatible J35-powered TL Type-S applications where increased engine torque places additional stress on factory mounting components.

Naturally Aspirated J-Series Builds

Provides improved drivetrain stability for engines equipped with performance intake systems, exhaust upgrades, camshaft modifications, and other naturally aspirated enhancements.

Supercharged and Turbocharged J-Series Applications

Helps control excessive engine movement in compatible forced-induction builds producing substantially more torque than factory configurations.

Acura RL and MDX Performance Applications

Offers firmer rear engine mounting support for compatible J-Series-powered luxury and SUV applications.

Street Performance Builds

The available 75A bushing option provides a balance of increased drivetrain rigidity and vibration isolation for performance-oriented street vehicles.

Track and Competition Applications

Higher-durometer 85A and 95A polyurethane bushings provide increased resistance to drivetrain movement during aggressive acceleration, braking, and shifting.

Factory Rear Engine Mount Replacement

An excellent performance-oriented alternative for replacing worn, cracked, or leaking original rear engine mounts.

Additional Information

• Manufacturer: Innovative Mounts
• Part Number: 10730
• Product Type: Rear Engine Mount
• Mounting Position: Rear
• Mount Construction: Solid Steel with Billet Accessories
• Bushing Material: Polyurethane
• Number of Mounts: 1
• Primary Vehicle Applications: 2003–2007 Honda Accord V6 / 2004–2008 Acura TL
• Additional Manufacturer-Listed Applications: Select Acura TSX, RL, MDX, ZDX, and Honda Odyssey models
• Engine Compatibility: Honda/Acura J-Series V6
• Transmission Compatibility: Manual / Automatic, Depending on Application
• Installation Type: Factory Rear Engine Mount Replacement
• Approximate Manufacturer-Listed Weight: 8 lbs
• Complete J-Series Mount Kit: Innovative Mounts 10750, for specified Accord V6 and Acura TL applications
• Manufacturer Warranty: Lifetime Limited Warranty

OEM Replacement Part Numbers:

• 50810-SDB-A02: CM Chassis – Manual Transmission

• 50810-SHJ-305: RL Chassis – Automatic Transmission

• 50810-SDA-A02: CL Chassis – Automatic Transmission

• 50810-SDA-E11: CL Chassis – Manual Transmission

• 50810-SJA-E01: KB Chassis – Automatic Transmission

• 50810-STX-A02: YD/YB Chassis – Manufacturer-Listed Application

Available Polyurethane Bushing Hardness Options:

• 75A – Black: Street and performance configuration offering increased drivetrain rigidity. Manufacturer-recommended for approximately 250–400 HP.

• 85A – Gray: Track and performance-oriented configuration designed to reduce drivetrain movement. Manufacturer-recommended for approximately 400–500 HP.

• 95A – Red: Race-oriented configuration designed for maximum drivetrain control. Manufacturer-recommended for applications exceeding 500 HP.

Bushing Selection Note: Horsepower ranges are general manufacturer recommendations rather than guaranteed capacity limits. Actual selection should consider engine torque, vehicle use, drivetrain configuration, and acceptable vibration levels.

Common Reasons for Replacement

• Worn Factory Engine Mounts: Aging rubber and hydraulic mounts can deteriorate, crack, leak, or separate, allowing excessive drivetrain movement.

• Excessive Engine Rocking: Unwanted engine movement during acceleration and deceleration can negatively affect drivetrain response.

• Engine Movement During Shifting: Firmer polyurethane bushings help maintain more consistent engine positioning during gear changes.

• Wheel Hop During Acceleration: Reduced drivetrain movement can help limit conditions that contribute to wheel hop.

• High-Horsepower J-Series Builds: Increased engine torque places additional stress on factory mounting components.

• Broken or Damaged Mount Bushings: Replace deteriorated factory rubber mounts with a durable polyurethane alternative.

• Improved Drivetrain Response: Reduced mount deflection provides a more direct connection between engine output and vehicle movement.

• Street and Track Performance: Improve engine stability during demanding driving conditions.

• Long-Term Drivetrain Maintenance: Replace an aging original rear engine mount with a performance-oriented mounting assembly.

Installation Notes

1. Verify Vehicle Compatibility: Confirm that the vehicle matches one of the manufacturer-listed applications and uses a compatible J-Series V6 mounting configuration.

2. Confirm Mounting Position: Innovative Mounts 10730 replaces the rear engine mount. It is not intended for the front or passenger-side mounting positions.

3. Verify OEM Mount Compatibility: Compare the original rear engine mount with the manufacturer's specified OEM replacement references before installation.

4. Confirm Odyssey Trim Compatibility: For 2005–2007 Honda Odyssey applications, this mount is intended for EX-L and EX-L Touring configurations only. It does not fit LX or EX models.

5. Support the Engine and Transmission: Properly support the drivetrain before removing the factory rear engine mount to prevent unexpected movement or damage.

6. Remove the Factory Rear Engine Mount: Follow the appropriate Honda or Acura service procedures when removing the original mounting assembly.

7. Inspect Factory Mounting Locations: Check the chassis mounting points, engine brackets, transmission brackets, and surrounding components for damage or excessive wear.

8. Install the Innovative Mounts Assembly: Position the replacement rear engine mount according to the manufacturer's instructions, ensuring correct orientation and alignment.

9. Inspect Factory Hardware: Examine original mounting bolts and fasteners before reuse. Replace damaged or excessively worn hardware.

10. Align the Drivetrain: Ensure the engine and transmission are properly positioned before final tightening to prevent unnecessary bushing preload.

11. Torque Mounting Hardware: Tighten all fasteners according to the applicable Honda/Acura and Innovative Mounts specifications.

12. Verify Component Clearance: Check clearance around the engine, transmission, exhaust system, steering components, and surrounding chassis structure before operating the vehicle.

13. Select the Appropriate Bushing Hardness: Choose the polyurethane durometer that best matches the vehicle's horsepower level, intended use, and acceptable vibration.

14. Expect Increased Engine Vibration: Performance polyurethane mounts generally transmit more engine vibration into the chassis than factory rubber or hydraulic mounts. Higher-durometer bushings typically increase vibration further.

15. Inspect Other Engine Mounts: If the original rear mount is worn or damaged, inspect the remaining factory engine and transmission mounts for deterioration.

16. Inspect After Installation: Recheck mounting hardware, drivetrain alignment, and surrounding component clearances after the initial driving period.

17. Professional Installation Recommended: Installation by an experienced Honda/Acura technician is strongly recommended.

18. Confirm Fitment Before Bolting Down: Innovative Mounts states that mounts showing installation bolt impressions cannot be returned or exchanged. Verify all mounting requirements before installation.

What's Included

• (1) Innovative Mounts Steel Rear Engine Mount – Part Number 10730

• (1) Polyurethane Bushing Assembly in the Selected Durometer

• Integrated Billet Mounting Components

Important: This product is a single rear engine mount, not a complete engine mount kit. Front, passenger-side, and other drivetrain mounts are sold separately unless specifically included in a complete mounting package.

Factory mounting hardware may need to be reused. Confirm the exact supplied hardware and components for the selected product configuration before installation.

Upgrade your Honda or Acura J-Series drivetrain with the Innovative Mounts Steel Rear Engine Mount (10730), engineered for compatible Honda Accord V6, Acura TL, RL, MDX, ZDX, and select Honda Odyssey applications.

Featuring heavy-duty steel construction, precision billet accessories, Innovative Mounts' no-tear polyurethane bushings, and multiple bushing hardness options, this replacement mount provides improved drivetrain stability, reduced engine movement, and more responsive power delivery.

Whether you're replacing a worn factory rear engine mount, upgrading your daily-driven Accord V6, or building a high-performance Acura TL Type-S, Innovative Mounts delivers the strength, durability, and drivetrain control enthusiasts demand.