Upgrade your Honda or Acura drivetrain with the Innovative Mounts Passenger-Side Engine Mount (10720), designed for compatible 2003–2007 Honda Accord V6 and 2004–2008 Acura TL applications equipped with J-Series V6 engines and manual or automatic transmissions.

Engineered to provide improved drivetrain stability, reduced engine movement, and increased durability compared with factory rubber engine mounts, this performance replacement mount is an excellent upgrade for both daily-driven and modified Honda and Acura vehicles.

Factory Honda and Acura engine mounts are designed primarily to isolate engine vibration and maintain everyday driving comfort. Over time, the original rubber mounting components can deteriorate, crack, or separate, allowing excessive engine movement during acceleration, deceleration, and gear changes. This movement can become especially noticeable in vehicles producing more horsepower and torque than factory specifications.

Innovative Mounts addresses these limitations with a heavy-duty steel mounting assembly, billet accessories, and specially engineered polyurethane bushings. The upgraded mounting design helps maintain more consistent engine positioning under load, reducing unwanted drivetrain movement and improving overall responsiveness.

Unlike traditional factory rubber mounts, Innovative Mounts utilizes a specially developed no-tear polyurethane bushing design. This construction provides increased resistance to drivetrain movement while retaining a degree of vibration isolation appropriate to the selected bushing hardness.

The Innovative Mounts 10720 is available in multiple polyurethane bushing hardness options, allowing enthusiasts to select the appropriate balance between street comfort and performance-oriented drivetrain rigidity.

Whether you're replacing a worn passenger-side engine mount on your Accord V6, improving drivetrain stability in your Acura TL, or preparing a J-Series engine for increased horsepower, the Innovative Mounts 10720 provides the strength, durability, and performance needed for a more responsive driving experience.

Features

• Passenger-Side Engine Mount: Direct replacement for the right-hand engine mounting position on compatible Honda Accord V6 and Acura TL applications.

• Heavy-Duty Steel Construction: Solid steel mounting components engineered for improved strength and durability.

• Billet Accessories: Precision-machined components complement the steel mounting assembly.

• J-Series V6 Compatibility: Designed for compatible Honda and Acura J-Series V6 engine applications.

• Manual and Automatic Transmission Compatibility: Supports compatible factory manual and automatic transmission configurations.

• Reduced Engine Movement: Helps minimize excessive drivetrain movement during acceleration, deceleration, and shifting.

• Improved Drivetrain Response: Firmer polyurethane bushings reduce unwanted engine deflection under load.

• Reduced Wheel Hop: Helps control drivetrain movement that can contribute to wheel hop during aggressive acceleration.

• Innovative No-Tear Polyurethane Bushings: Engineered for durability and controlled vibration isolation.

• Multiple Bushing Hardness Options: Available in 75A, 85A, and 95A configurations.

• Factory Replacement Design: Replaces the original Honda/Acura passenger-side engine mount.

• CAD/CAM Designed: Developed using computer-aided design for precise fitment and consistent manufacturing.

• Stress Analyzed: Engineered to withstand the additional loads associated with performance driving.

• Performance-Oriented Construction: Suitable for street performance, modified engines, and competition applications.

• Lifetime Manufacturer Warranty: Backed by Innovative Mounts' lifetime warranty, subject to manufacturer terms.

Transmission Compatibility:

• Compatible Factory Manual Transmissions

• Compatible Factory Automatic Transmissions

Important Fitment Requirements:

• Designed for the passenger-side (right-hand) engine mounting position.

• Intended for compatible J-Series V6 engine configurations.

• Not a complete engine mount kit.

• Not intended as a direct replacement for the front, rear, or driver-side transmission mounts.

• Four-cylinder Accord applications require separate verification of the complete mounting configuration.

• Confirm the vehicle's original mount part number and mounting arrangement before installation.

Popular Performance Applications

2003–2007 Honda Accord V6 Performance Builds

An excellent upgrade for Accord V6 owners seeking improved drivetrain stability and reduced engine movement compared with aging factory mounts.

2004–2008 Acura TL Upgrades

Provides improved passenger-side engine support for J32-powered Acura TL applications, helping minimize unwanted drivetrain movement during aggressive acceleration.

Acura TL Type-S Performance Builds

Suitable for compatible J35A8-powered TL Type-S applications where increased torque places additional stress on factory mounting components.

Naturally Aspirated J-Series Builds

Provides improved engine stability for vehicles equipped with performance intake systems, exhaust upgrades, engine management modifications, and other naturally aspirated enhancements.

Supercharged and Turbocharged J-Series Applications

Helps control excessive drivetrain movement in modified J-Series builds producing substantially more torque than factory configurations.

Street Performance Applications

The available 75A bushing option provides a balance of increased drivetrain rigidity and vibration isolation for enthusiasts seeking improved performance without selecting a dedicated racing bushing.

Track and Competition Builds

Higher-durometer 85A and 95A bushings provide increased resistance to drivetrain movement during demanding acceleration and shifting conditions.

Additional Information

• Manufacturer: Innovative Mounts
• Part Number: 10720
• Product Type: Passenger-Side Engine Mount
• Mounting Position: Right-Hand / Passenger Side
• Mount Construction: Solid Steel with Billet Accessories
• Bushing Material: Polyurethane
• Number of Mounts: 1
• Primary Vehicle Applications: 2003–2007 Honda Accord V6 / 2004–2008 Acura TL
• Engine Compatibility: Honda/Acura J-Series V6
• Transmission Compatibility: Manual / Automatic
• Installation Type: Factory Replacement
• OEM Replacement Part Number: Honda 50820-SDA-A11
• Approximate Manufacturer-Listed Weight: 6 lbs
• Complete J-Series Mount Kit: Innovative Mounts 10750
• Additional Kit Application: Innovative Mounts 10751, with the required application-specific components
• Manufacturer Warranty: Lifetime Limited Warranty

Available Polyurethane Bushing Hardness Options:

• 75A – Black: Street and performance configuration offering increased drivetrain rigidity. Manufacturer-recommended for approximately 250–400 HP.

• 85A – Gray: Track and performance-oriented configuration designed to reduce drivetrain movement. Manufacturer-recommended for approximately 400–500 HP.

• 95A – Red: Race-oriented configuration designed for maximum drivetrain control. Manufacturer-recommended for applications exceeding 500 HP.

Bushing Selection Note: Horsepower ranges are general manufacturer recommendations rather than guaranteed capacity limits. Actual selection should consider engine torque, vehicle use, drivetrain configuration, and acceptable vibration levels.

Common Reasons for Replacement

• Worn Factory Engine Mounts: Aging rubber mounts can crack, deteriorate, or separate, allowing excessive drivetrain movement.

• Excessive Engine Rocking: Unwanted engine movement during acceleration and deceleration can negatively affect drivetrain response.

• Engine Movement During Shifting: Firmer polyurethane bushings help maintain more consistent engine positioning during gear changes.

• Wheel Hop During Acceleration: Reduced drivetrain movement can help limit conditions that contribute to wheel hop.

• High-Horsepower J-Series Builds: Increased engine torque places additional stress on factory mounting components.

• Broken or Damaged Mount Bushings: Replace deteriorated factory rubber mounts with a durable polyurethane alternative.

• Improved Drivetrain Response: Reduced mount deflection provides a more direct connection between engine output and vehicle movement.

• Street and Track Performance: Improve engine stability during demanding driving conditions.

• Long-Term Drivetrain Maintenance: Replace an aging original passenger-side engine mount with a performance-oriented mounting assembly.

Installation Notes

1. Verify Vehicle Compatibility: Confirm that the vehicle is a compatible 2003–2007 Honda Accord V6 or 2004–2008 Acura TL equipped with a supported J-Series engine.

2. Confirm Mounting Position: Innovative Mounts 10720 replaces the passenger-side (right-hand) engine mount. It is not intended for the front, rear, or driver-side transmission mounting positions.

3. Verify OEM Mount Compatibility: Confirm that the original mounting configuration corresponds to Honda OEM part number 50820-SDA-A11 or the manufacturer's specified equivalent.

4. Support the Engine and Transmission: Properly support the drivetrain before removing the factory passenger-side engine mount to prevent unexpected movement or damage.

5. Remove the Factory Engine Mount: Follow the appropriate Honda or Acura service procedures when removing the original mounting assembly.

6. Inspect Factory Mounting Locations: Check the engine bracket, chassis mounting points, and surrounding components for damage, corrosion, or excessive wear.

7. Install the Innovative Mounts Assembly: Position the replacement passenger-side engine mount according to the manufacturer's instructions, ensuring correct orientation and alignment.

8. Inspect Factory Hardware: Examine original mounting bolts and fasteners before reuse. Replace damaged or excessively worn hardware.

9. Align the Drivetrain: Ensure the engine and transmission are properly positioned before final tightening to prevent unnecessary bushing preload.

10. Torque Mounting Hardware: Tighten all fasteners according to the applicable Honda/Acura and Innovative Mounts specifications.

11. Verify Component Clearance: Check clearance around the engine, transmission, intake system, exhaust components, and surrounding chassis components before operating the vehicle.

12. Select the Appropriate Bushing Hardness: Choose the polyurethane durometer that best matches the vehicle's horsepower level, intended use, and acceptable vibration.

13. Expect Increased Engine Vibration: Performance polyurethane mounts generally transmit more engine vibration into the chassis than factory rubber mounts. Higher-durometer bushings typically increase vibration further.

14. Inspect Other Engine Mounts: If the original passenger-side mount is worn or damaged, inspect the remaining factory engine and transmission mounts for deterioration.

15. Inspect After Installation: Recheck mounting hardware, drivetrain alignment, and surrounding clearances after the initial driving period.

16. Professional Installation Recommended: Installation by an experienced Honda/Acura technician is strongly recommended.

17. Confirm Fitment Before Bolting Down: Innovative Mounts states that mounts showing installation bolt impressions cannot be returned or exchanged. Verify all mounting requirements before installation.

What's Included

• (1) Innovative Mounts Passenger-Side Engine Mount – Part Number 10720

• (1) Polyurethane Bushing Assembly in the Selected Durometer

• Integrated Billet Mounting Components

Important: This product is a single passenger-side engine mount, not a complete engine mount kit. Front, rear, and other drivetrain mounts are sold separately unless specifically included in a complete mounting package.

Factory mounting hardware may need to be reused. Confirm the exact hardware supplied with the selected product configuration before installation.

Upgrade your Honda or Acura drivetrain with the Innovative Mounts Passenger-Side Engine Mount (10720), engineered for compatible 2003–2007 Honda Accord V6 and 2004–2008 Acura TL applications equipped with J-Series engines and manual or automatic transmissions.

Featuring heavy-duty steel construction, precision billet accessories, Innovative Mounts' no-tear polyurethane bushings, and multiple bushing hardness options, this replacement mount provides improved drivetrain stability, reduced engine movement, and more responsive power delivery.

Whether you're replacing a worn factory engine mount, upgrading your daily-driven Accord V6, or building a high-performance Acura TL, Innovative Mounts delivers the strength, durability, and reliability enthusiasts demand.

Improve drivetrain stability and performance with the Innovative Mounts 10720 Passenger-Side Engine Mount, available at KSeriesParts.com.