Engineered to improve drivetrain stability, reduce excessive engine movement, and provide increased durability over aging factory mounts, this performance engine mount kit is an excellent upgrade for street-driven and modified Honda and Acura vehicles.

Factory engine mounts are designed primarily to isolate engine vibrations and provide a comfortable driving experience. Many original Honda and Acura mounts utilize fluid-filled designs to absorb vibration. Over time, these mounts can deteriorate, crack, leak, or separate, allowing excessive drivetrain movement during acceleration, deceleration, and gear changes.

Innovative Mounts addresses these limitations with heavy-duty steel mount construction and specially engineered polyurethane bushings. By replacing the factory fluid-filled mounting system with a firmer polyurethane design, the 10350 kit helps minimize unwanted engine movement, improve drivetrain response, and reduce wheel hop during aggressive acceleration.

Each mount is CAD/CAM designed and stress analyzed to provide precise fitment and dependable performance. The kit features Innovative Mounts' no-tear polyurethane bushings, available in multiple hardness options to accommodate different driving styles and horsepower requirements.

Designed as a direct factory replacement, the Innovative Mounts 10350 kit installs using the original mounting locations and factory hardware. No hood trimming or notching is required for compatible applications.

Whether you're replacing worn engine mounts on your daily-driven Accord V6, improving drivetrain stability in your Acura TL Type-S, or preparing your Acura CL for additional horsepower, the Innovative Mounts 10350 Engine Mount Kit provides the strength, durability, and performance enthusiasts demand.

Features

• Complete 3-Piece Engine Mount Kit: Includes front, rear, and passenger-side engine mounts for compatible J-Series automatic transmission applications.

• Heavy-Duty Steel Construction: Durable steel mounting brackets engineered for increased strength and long-lasting performance.

• Direct Factory Replacement: Designed to replace the original Honda and Acura engine mounts without requiring major modifications.

• J-Series V6 Compatibility: Engineered for compatible Honda and Acura J-Series V6 applications.

• Automatic Transmission Design: Specifically configured for supported automatic transmission vehicles.

• Reduced Engine Movement: Helps minimize excessive drivetrain movement during acceleration, deceleration, and shifting.

• Improved Drivetrain Response: Firmer polyurethane bushings help reduce unwanted engine deflection under load.

• Reduced Wheel Hop: Helps control drivetrain movement that can contribute to wheel hop during aggressive acceleration.

• No-Tear Polyurethane Bushings: Innovative Mounts' specially engineered bushings provide increased durability compared with deteriorated factory rubber mounts.

• Eliminates Factory Fluid-Filled Mount Design: Replaces applicable hydraulic engine mounts with performance-oriented polyurethane assemblies.

• Multiple Bushing Hardness Options: Available in 75A, 85A, and 95A configurations for different performance requirements.

• Bolt-On Installation: Designed to utilize existing factory mounting locations.

• Uses Factory Hardware: Reuses original Honda and Acura mounting hardware where specified.

• No Hood Modification Required: Engineered to install without trimming or notching the hood.

• CAD/CAM Designed: Developed using computer-aided design for accurate fitment and consistent manufacturing.

• Stress Analyzed: Engineered to withstand the demands of performance driving.

• Lifetime Manufacturer Warranty: Backed by Innovative Mounts' lifetime warranty, subject to manufacturer terms.

Important Fitment Requirements:

• Designed for compatible J-Series V6 engines with automatic transmissions.

• The Honda Accord application is specifically for the 2-door V6 Coupe.

• Does not fit the 1998–2002 Honda Accord V6 Sedan.

• Not intended for four-cylinder Honda Accord applications.

• Not designed for manual transmission Acura CL Type-S models.

• For the 2003 Acura CL Type-S 6-speed manual transmission, see Innovative Mounts 10351.

• Verify engine, transmission, and chassis compatibility before installation.

Popular Performance Applications

Honda Accord V6 Coupe Performance Builds

An excellent upgrade for 1998–2002 Accord V6 Coupe owners seeking improved drivetrain stability and reduced engine movement compared with aging factory mounts.

Acura TL and TL Type-S Upgrades

Provides improved engine support for J32-powered Acura TL applications, helping minimize unwanted drivetrain movement during aggressive acceleration.

Acura CL and CL Type-S Performance Builds

Ideal for compatible automatic transmission CL applications where increased engine movement can negatively affect drivetrain response and driving feel.

Naturally Aspirated J-Series Performance Builds

Provides improved drivetrain stability for J30 and J32 engines equipped with performance intake systems, exhaust upgrades, engine management modifications, and other naturally aspirated enhancements.

Forced-Induction J-Series Applications

A performance-oriented mounting solution for compatible supercharged or turbocharged J-Series builds where increased torque places additional stress on factory engine mounts.

Street Performance Applications

The available polyurethane bushing hardness options allow owners to select a mounting configuration that balances improved drivetrain response with acceptable vibration levels.

High-Horsepower J-Series Builds

Higher-durometer bushing options help limit drivetrain movement in modified V6 applications producing substantially more torque than factory configurations.

Additional Information

• Manufacturer: Innovative Mounts
• Part Number: 10350
• Product Type: Steel Replacement Engine Mount Kit
• Mount Construction: Steel
• Finish: Black Protective Finish
• Bushing Material: Polyurethane
• Number of Mounts: 3
• Mounting Configuration: Front, Rear, and Passenger-Side Engine Mounts
• Primary Vehicle Applications: 1998–2002 Honda Accord V6 Coupe / 1999–2003 Acura TL / 2001–2003 Acura CL
• Engine Compatibility: Honda/Acura J-Series V6
• Transmission Compatibility: Automatic Transmission
• Installation Type: Direct Factory Replacement
• Installation Hardware: Uses Factory/OEM Hardware
• Hood Modification Required: No
• Approximate Manufacturer-Listed Kit Weight: 15 lbs
• Manual Transmission Alternative: Innovative Mounts 10351
• Manufacturer Warranty: Lifetime Limited Warranty

Available Polyurethane Bushing Hardness Options:

• 75A – Black: Street and performance configuration offering increased drivetrain rigidity. Manufacturer-recommended for approximately 250–400 HP.

• 85A – Gray: Track and performance-oriented configuration designed to reduce drivetrain movement. Manufacturer-recommended for approximately 400–500 HP.

• 95A – Red: Race-oriented configuration designed for maximum drivetrain control. Manufacturer-recommended for applications exceeding 500 HP.

Bushing Selection Note: Horsepower ranges are general manufacturer recommendations rather than guaranteed capacity limits. Actual bushing selection should consider engine torque, vehicle use, drivetrain configuration, and acceptable vibration levels.

Common Reasons for Replacement

• Worn Factory Engine Mounts: Aging rubber or hydraulic mounts can deteriorate, allowing excessive drivetrain movement.

• Leaking Hydraulic Mounts: Factory fluid-filled mounts can develop leaks and lose their ability to properly control engine vibration.

• Excessive Engine Rocking: Unwanted drivetrain movement during acceleration and shifting can negatively affect vehicle response.

• Wheel Hop During Acceleration: Firmer polyurethane mounts help reduce drivetrain movement that can contribute to wheel hop.

• High-Horsepower Engine Builds: Increased torque from modified J-Series engines places additional stress on factory mounting components.

• Broken or Damaged Mount Bushings: Replace deteriorated factory mounts with durable polyurethane components.

• Improved Drivetrain Response: Reduced engine movement can provide a more direct and connected driving feel.

• Performance Driving Applications: Improve engine and transmission stability during demanding driving conditions.

• Long-Term Drivetrain Maintenance: Replace worn original mounts with a performance-oriented mounting system designed for durability.

Installation Notes

1. Verify Vehicle Compatibility: Confirm that the vehicle is a compatible 1998–2002 Honda Accord V6 Coupe, 1999–2003 Acura TL, or 2001–2003 Acura CL equipped with a supported J-Series V6 engine and automatic transmission.

2. Confirm Honda Accord Body Style: This kit is designed for the 2-door Accord V6 Coupe and does not fit the 4-door Accord V6 Sedan.

3. Verify Transmission Type: Innovative Mounts 10350 is designed for automatic transmission applications. Manual transmission Acura CL Type-S models require Innovative Mounts 10351.

4. Support the Engine and Transmission: Properly support the drivetrain before removing the factory mounts to prevent unexpected movement or damage.

5. Remove Existing Engine Mounts: Follow the appropriate Honda or Acura service procedures when removing the original front, rear, and passenger-side engine mounts.

6. Inspect Factory Mounting Locations: Check all chassis mounting points, engine brackets, and surrounding components for damage, corrosion, or previous modifications.

7. Install the Replacement Mounts: Position the Innovative Mounts assemblies according to the manufacturer's instructions, ensuring correct orientation and alignment.

8. Reuse Factory Mounting Hardware: This kit is designed to utilize original Honda/Acura mounting hardware where specified. Inspect all bolts and fasteners before reuse.

9. Align the Drivetrain: Ensure the engine and transmission are properly positioned before final tightening to prevent unnecessary mount preload.

10. Torque Mounting Hardware: Tighten all mounting hardware according to the applicable manufacturer specifications. Avoid overtightening or improperly loading the polyurethane bushings.

11. Verify Component Clearance: Check clearance around the engine, transmission, exhaust system, intake components, and surrounding chassis components before operating the vehicle.

12. Select the Appropriate Bushing Hardness: Choose the polyurethane durometer that best matches the vehicle's intended use, horsepower level, and acceptable vibration.

13. Expect Increased Engine Vibration: Performance polyurethane mounts generally transmit more engine vibration into the chassis than factory rubber or hydraulic mounts. Higher-durometer bushings typically increase vibration further.

14. Inspect After Installation: Recheck mounting hardware, drivetrain alignment, and surrounding component clearances after the initial driving period.

15. Professional Installation Recommended: Installation by an experienced Honda/Acura technician is strongly recommended.

16. Confirm Fitment Before Bolting Down: Innovative Mounts states that mounts showing installation bolt impressions cannot be returned or exchanged. Verify all mounting requirements before installation.

What's Included

• (1) Front Engine Mount – Innovative Mounts 10340

• (1) Rear Engine Mount – Innovative Mounts 10330

• (1) Passenger-Side Engine Mount – Innovative Mounts 10320

• Polyurethane Bushings in the Selected Durometer

Important: This kit is designed to reuse factory Honda/Acura mounting hardware. Additional hardware or replacement fasteners may be required depending on the condition of the original components.

Upgrade your Honda or Acura J-Series drivetrain with the Innovative Mounts Steel Engine Mount Kit (10350), engineered for compatible 1998–2002 Honda Accord V6 Coupe, 1999–2003 Acura TL, and 2001–2003 Acura CL automatic transmission applications.

Featuring heavy-duty steel construction, Innovative Mounts' no-tear polyurethane bushings, multiple bushing hardness options, and direct factory replacement fitment, this kit provides improved drivetrain stability, reduced engine movement, and more responsive power delivery.

Whether you're replacing worn factory hydraulic mounts, upgrading your daily-driven Accord V6, or building a high-performance Acura TL or CL, Innovative Mounts delivers the strength, durability, and reliability enthusiasts demand.