Images may be for reference only
Product Details
| Part Number: | HYB-BLT-00-04 |
| Brand: | Hybrid Racing |
| Belt Length: | 1320mm |
| Belt Ribs: | 7 |
Keep your K-Series accessory drive running reliably with the Hybrid Racing HYB-BLT-00-04 Power Steering Delete Micro V-Belt. Designed specifically for use with Hybrid Racing's K-Series Idler Bracket & Pulley Kit, this high-quality 7-rib Poly-V belt provides the proper length for select K20 and K24 accessory configurations where power steering and A/C have been deleted.
The HYB-BLT-00-04 measures 1320mm (52.0 inches) and carries the belt specification 7PK1320 / 520K7. Hybrid Racing specifically calls for this belt when using its HYB-IDB-01-02 idler bracket with a 6.50-inch crank pulley in a power-steering and A/C-delete configuration.
Manufactured using PIX-Thermal-XC high-temperature Poly-V technology, the belt incorporates fiber-loaded EPDM compression rubber for excellent thermal resistance and dimensional stability. A specially designed top fabric improves lateral stiffness and flexibility while helping protect the belt from oil, grease, and dust—making it well suited for demanding street and motorsport K-Series builds.
Features
- Genuine Hybrid Racing K-Series Micro V-Belt
- Part Number: HYB-BLT-00-04
- Designed for Hybrid Racing K-Series Power Steering Delete / Idler Bracket systems
- 1320mm / 52.0-inch length
- Belt specification: 7PK1320 / 520K7
- 7-rib Poly-V / serpentine belt
- PIX-Thermal-XC high-temperature construction
- Fiber-loaded EPDM compression rubber
- Excellent heat resistance and dimensional stability
- Special top fabric improves lateral stiffness and flexibility
- Resistant to oil and heat
- Helps protect against exposure to grease and dust
- Antistatic construction
- Operating temperature range of approximately -31°F to 266°F
- OEM-quality construction
- Backed by Hybrid Racing's 5-year warranty
- Designed as a replacement belt for compatible Hybrid Racing idler bracket setups
- Suitable for K-Series street, swap, drag, autocross, and track builds
Specifications
- Manufacturer: Hybrid Racing
- Part Number: HYB-BLT-00-04
- Belt Type: Poly-V / Micro V / Serpentine
- Ribs: 7
- Belt Size: 7PK1320 / 520K7
- Length: 1320mm / 52.0"
- Material: Fiber-loaded EPDM
- Temperature Range: Approximately -31°F to 266°F
Recommended Configuration
Hybrid Racing specifically lists HYB-BLT-00-04 for:
HYB-IDB-01-02 K-Series Idler Bracket & Pulley Kit
- 6.50-inch crank pulley
- Power steering deleted
- A/C deleted
- Most compatible K-Series engines except K24Z3
Hybrid Racing's compatible idler bracket system covers applications including:
- 2002–2006 Acura RSX
- 2004–2008 Acura TSX
- 2003–2007 Honda Accord
- 2002–2011 Honda Civic Si
- 2002–2006 Honda CR-V
- 2003–2011 Honda Element
- K-Series swaps using compatible engines and accessory configurations
Kit Includes
- 1 × Hybrid Racing 1320mm / 52.0" 7-Rib Micro V-Belt
Important Fitment Note:
- HYB-BLT-00-04 should not be selected based on vehicle or engine code alone. Belt size depends on the Hybrid Racing idler bracket being used, crank pulley diameter, and whether A/C is retained. For the HYB-IDB-01-02 bracket, Hybrid Racing specifies HYB-BLT-00-04 with a 6.50-inch crank pulley and no A/C. Measure your crank pulley and confirm your accessory configuration before ordering.
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
This part does not have vehicle specific fitment. Please contact us if you need assistance.
Reviews ★★★★★
No Reviews Yet!
Write a Review