Images may be for reference only
Product Details
| Part Number: | HYB-BLT-00-03 |
| Brand: | Hybrid Racing |
| Belt Length: | 1300mm |
| Belt Ribs: | 7 |
Keep your K-Series accessory drive operating reliably with the Hybrid Racing HYB-BLT-00-03 Power Steering Delete Micro V-Belt. Designed specifically for use with Hybrid Racing's K-Series Idler Bracket & Pulley Kits, this high-temperature 7-rib Poly-V belt provides the correct routing and length for select K20 and K24 power-steering-delete configurations.
The HYB-BLT-00-03 measures 1300mm (51.2 inches) and carries the belt specification 7PK1300 / 512K7. Depending on which Hybrid Racing idler bracket is being used, this belt is specified for either a 6.25-inch or 6.50-inch crank pulley when both power steering and A/C are deleted.
Manufactured using PIX-Thermal-XC high-temperature Poly-V technology, this belt features fiber-loaded EPDM compression rubber for excellent thermal resistance and dimensional stability. Its specially designed top fabric enhances lateral stiffness and flexibility while helping protect against oil, grease, and dust—making it well suited for demanding street and motorsport K-Series applications.
Features
- Genuine Hybrid Racing K-Series Micro V-Belt
- Part Number: HYB-BLT-00-03
- Designed for Hybrid Racing K-Series Power Steering Delete / Idler Bracket systems
- 1300mm / 51.2-inch length
- Belt specification: 7PK1300 / 512K7
- 7-rib Poly-V / serpentine belt
- PIX-Thermal-XC high-temperature construction
- Fiber-loaded EPDM compression rubber
- Excellent thermal resistance and dimensional stability
- Special top fabric enhances lateral stiffness and flexibility
- Helps protect against oil, grease, and dust
- Oil and heat-resistant
- Antistatic construction
- Operating temperature range of approximately -31°F to 266°F
- OEM-quality construction
- 5-year warranty
- Suitable for street, K-swap, drag, autocross, and track builds
Specifications
- Manufacturer: Hybrid Racing
- Part Number: HYB-BLT-00-03
- Type: Micro V / Poly-V Serpentine Belt
- Ribs: 7
- Belt Size: 7PK1300 / 512K7
- Length: 1300mm / 51.2"
- Material: Fiber-loaded EPDM
- Temperature Range: Approximately -31°F to 266°F
Compatible Hybrid Racing Configurations
For power steering and A/C delete applications, Hybrid Racing specifies HYB-BLT-00-03 for:
- HYB-IDB-01-02 Idler Bracket Kit
- Most K-Series engines except K24Z3
- 6.25-inch crank pulley
- Power steering deleted
- A/C deleted
- HYB-IDB-01-04 Idler Bracket Kit
- K24A applications
- 6.50-inch crank pulley
- Power steering deleted
- A/C deleted
Hybrid Racing's installation guide specifically demonstrates HYB-BLT-00-03 with the HYB-IDB-01-04 bracket on a K24A equipped with a 6.50-inch crank pulley.
Common Applications
When used with the appropriate Hybrid Racing idler bracket and accessory configuration, the system supports applications such as:
- 2002–2006 Acura RSX
- 2004–2008 Acura TSX
- 2003–2007 Honda Accord
- 2002–2011 Honda Civic Si
- 2002–2006 Honda CR-V
- 2003–2011 Honda Element
- Compatible K-Series engine swaps using engines from these applications
Kit Includes
- 1 × Hybrid Racing HYB-BLT-00-03 1300mm / 51.2" 7-Rib Micro V-Belt
Important Fitment Note:
- HYB-BLT-00-03 should not be selected based on vehicle or engine code alone. Correct belt length depends on the Hybrid Racing idler bracket, crank pulley diameter, and whether A/C is retained. Hybrid Racing recommends measuring the outside diameter of your crank pulley before ordering. This belt must be used with HYB-IDB-01-02 or HYB-IDB-01-04 in the appropriate configuration.
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
This part does not have vehicle specific fitment. Please contact us if you need assistance.
Reviews ★★★★★
No Reviews Yet!
Write a Review