Images may be for reference only
Product Details
| Part Number: | HYB-BLT-00-02 |
| Brand: | Hybrid Racing |
| Belt Length: | 1285mm |
| Belt Ribs: | 7 |
Keep your K-Series accessory drive operating reliably with the Hybrid Racing HYB-BLT-00-02 Power Steering Delete Micro V-Belt. Designed specifically for use with Hybrid Racing's K-Series Idler Bracket & Pulley Kit, this high-temperature Poly-V belt provides the correct length for specific power-steering and A/C-delete K-Series configurations.
The HYB-BLT-00-02 measures 1285mm (50.5 inches) and uses a 7-rib 7PK1285 / 505K7 configuration. Hybrid Racing specifies this particular belt for its HYB-IDB-01-04 K24A idler bracket kit when used with a 6.25-inch crank pulley and without A/C. Because belt requirements vary depending on engine, crank pulley diameter, and accessory configuration, Hybrid Racing recommends measuring the crank pulley before selecting a belt.
Constructed using PIX-Thermal-XC high-temperature Poly-V technology, the belt features fiber-loaded EPDM compression rubber for excellent heat resistance and dimensional stability. A specially designed top fabric improves lateral stiffness and flexibility while helping protect the belt against oil, grease, and dust.
Features
- Genuine Hybrid Racing K-Series Micro V-Belt
- Part Number: HYB-BLT-00-02
- Designed for Hybrid Racing K-Series Power Steering Delete / Idler Bracket systems
- 1285mm / 50.5-inch overall belt length
- Belt specification: 7PK1285 / 505K7
- 7-rib Poly-V belt
- PIX-Thermal-XC high-temperature construction
- Fiber-loaded EPDM compression rubber
- Excellent thermal resistance and dimensional stability
- Special top fabric enhances lateral stiffness and flexibility
- Resistant to heat and oil
- Helps protect against exposure to grease and dust
- Antistatic construction
- Operating temperature range of approximately -31°F to 266°F
- OEM-quality replacement belt
- Designed to maintain reliable accessory-drive operation in performance K-Series applications
- Suitable for street, K-swap, drag, autocross, and track builds
Specifications
- Manufacturer: Hybrid Racing
- Part Number: HYB-BLT-00-02
- Belt Type: Micro V / Poly-V
- Ribs: 7
- Belt Size: 7PK1285 / 505K7
- Length: 1285mm / 50.5"
- Material: Fiber-loaded EPDM
- Temperature Range: Approximately -31°F to 266°F
- Recommended Configuration
Hybrid Racing specifically lists HYB-BLT-00-02 for:
HYB-IDB-01-04 K24A Idler Bracket & Pulley Kit
- 6.25-inch crank pulley
- Power steering deleted
- A/C deleted
- 50.5-inch / 1285mm belt requirement
Kit Includes
- 1 × Hybrid Racing 7PK1285 / 505K7 Micro V-Belt
Important Fitment Note:
- Do not select this belt based on engine code alone. Hybrid Racing's belt sizing depends on the idler bracket being used, crank pulley diameter, and whether the vehicle retains A/C. HYB-BLT-00-02 is specifically listed with the HYB-IDB-01-04 K24A kit and a 6.25-inch crank pulley for the power-steering and A/C-delete configuration. Measure your crank pulley and verify your accessory configuration before ordering.
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
This part does not have vehicle specific fitment. Please contact us if you need assistance.
Reviews ★★★★★
No Reviews Yet!
Write a Review