Product Details
The H&R TRAK+ DRM 20mm Hubcentric Wheel Spacers (4075644SW) are premium German-engineered wheel spacers designed to improve wheel fitment, increase track width, and create a wider, more aggressive stance on compatible Honda Civic Type R and Acura Integra Type S models.
Featuring a 20mm thickness per spacer, 5x120 bolt pattern, 64.1mm center bore, M14x1.5 wheel studs, and a black hard-anodized finish, these H&R wheel spacers provide a precision-engineered solution for enthusiasts looking to improve wheel positioning without replacing their existing wheels.
Manufactured in Germany from H&R's proprietary lightweight aluminum and magnesium alloy, TRAK+ wheel spacers are designed to deliver exceptional strength, durability, and corrosion resistance while minimizing unnecessary weight.
The DRM Series features a bolt-on design that attaches directly to the vehicle's factory wheel studs using the supplied special mounting nuts. Once secured, the wheel mounts to the new studs integrated into the spacer assembly.
Unlike conventional slip-on wheel spacers, the DRM system provides a dedicated mounting arrangement that does not require replacing the factory wheel studs when the installation meets H&R's requirements.
The hubcentric design incorporates a precision-machined center bore and integrated centering lip to maintain proper wheel alignment with the vehicle hub. This helps distribute loads appropriately while minimizing the potential for vibration caused by improperly centered wheels.
With a 20mm increase in wheel offset per side, these spacers effectively move the wheels outward by approximately 0.79 inches, increasing the overall track width by approximately 40mm when installed on both sides of an axle.
Whether improving the stance of a Honda Civic Type R, dialing in wheel fitment on an Acura Integra Type S, or complementing an aftermarket suspension setup, the H&R 4075644SW TRAK+ DRM Wheel Spacer Kit provides precision fitment, premium construction, and a distinctive black finish.
Features
20mm Spacer Thickness: Moves each wheel outward approximately 0.79 inches.
40mm Total Track Width Increase: Adds approximately 1.57 inches of track width when installed on both sides of an axle.
5x120 Bolt Pattern: Designed for compatible five-lug Honda and Acura applications.
64.1mm Hubcentric Center Bore: Precision-machined to match compatible factory hubs.
M14x1.5 Wheel Studs: Integrated studs designed for compatible wheel mounting hardware.
DRM Bolt-On Design: Spacers attach directly to the factory wheel studs using supplied special nuts.
Integrated Wheel Studs: Provides dedicated studs for mounting the wheels to the spacers.
Black Hard-Anodized Finish: Enhances corrosion resistance and provides a clean appearance.
Proprietary Aluminum/Magnesium Alloy: Lightweight, high-strength material developed for H&R wheel spacers.
Hubcentric Construction: Helps maintain proper wheel centering and consistent load distribution.
Precision CNC Machined: Manufactured for accurate dimensions and fitment.
Improved Wheel Positioning: Reduces the recessed appearance of factory wheels.
Aggressive Stance: Helps position wheels closer to the outer fender line.
Compatible With Select Factory and Aftermarket Wheels: Requires verification of wheel mounting surface and clearance.
No Extended Factory Studs Required: DRM construction uses the existing hub studs and integrated replacement mounting studs.
German Engineering: Designed and manufactured by H&R Special Springs in Germany.
Sold as a Pair: Includes two wheel spacers for one axle.
Mounting Hardware Included: Supplied with special nuts for securing the spacers to the vehicle hubs.
Popular Performance Applications
2023–2026 Honda Civic Type R FL5
2024–2026 Acura Integra Type S DE5
OEM Wheel Fitment Improvements
Aggressive Street Performance Builds
Flush Wheel and Fender Fitment
Aftermarket Suspension Upgrades
Lowered Vehicle Applications
Performance Wheel Fitment Adjustments
Wider Track Width Configurations
Street and Track-Inspired Builds
Factory Wheel Stance Improvements
Custom Wheel Offset Adjustments
Additional Information
- Manufacturer: H&R Special Springs
- Manufacturer Part Number: 4075644SW
- Product Series: TRAK+
- Spacer Type: DRM Series / Bolt-On Hubcentric
- Product Type: Wheel Spacer Kit
- Spacer Thickness: 20mm Per Side
- Spacer Thickness in Inches: Approximately 0.79 Inches
- Total Track Width Increase: 40mm Per Axle
- Bolt Pattern: 5x120
- Center Bore: 64.1mm
- Wheel Stud Thread Pitch: M14x1.5
- Spacer Material: Proprietary Aluminum/Magnesium Alloy
- Spacer Finish: Black Hard Anodized
- Manufacturing Process: Precision CNC Machined
- Hubcentric: Yes
- Integrated Wheel Studs: Yes
- Factory Stud Replacement Required: No, when installed according to H&R requirements
- Mounting Configuration: DRM Bolt-On
- Mounting Hardware: Special Spacer Mounting Nuts Included
- Quantity: Two Wheel Spacers
- Vehicle Application: Honda Civic Type R FL5 / Acura Integra Type S DE5
- Country of Manufacture: Germany
H&R TRAK+ DRM Bolt-On Wheel Spacer Design
The H&R 4075644SW uses the company's DRM-style wheel spacer mounting system.
Unlike conventional slip-on spacers, which fit over the factory studs and may require longer studs or additional thread engagement, DRM spacers are secured directly to the vehicle hub.
The installation system works as follows:
The wheel is removed from the vehicle.
The DRM spacer is positioned over the existing factory wheel studs.
The spacer is secured using the supplied special mounting nuts.
The wheel is installed onto the new studs integrated into the spacer.
Compatible wheel lug nuts are installed and tightened according to the applicable specifications.
This arrangement provides a dedicated mounting interface between the vehicle hub, spacer, and wheel.
The design is particularly useful for thicker wheel spacers where conventional slip-on configurations may be impractical.
Precision Hubcentric Construction
The H&R 4075644SW features a hubcentric design with a 64.1mm center bore.
Hubcentric wheel spacers are designed to maintain the centering relationship between the vehicle hub and wheel.
H&R incorporates a precision-machined hub interface and centering lip to help the wheel remain correctly positioned.
Advantages include:
Accurate wheel centering
Consistent hub-to-spacer fitment
Improved mounting alignment
Reduced potential for centering-related vibration
Proper contact between mating surfaces
Precise fitment for compatible factory hubs
Correct hubcentric fitment is especially important for high-performance vehicles such as the Civic Type R and Integra Type S.
20mm Thickness and Improved Wheel Stance
The H&R 4075644SW provides a 20mm increase in wheel position per side.
This moves the wheels outward, helping reduce the recessed appearance commonly associated with conservative factory wheel offsets.
When installed on both sides of an axle, the spacers increase total track width by approximately 40mm.
Potential benefits include:
More aggressive wheel positioning
Reduced wheel-to-fender gap appearance
Improved visual balance
Greater flexibility when adjusting wheel fitment
A wider overall vehicle stance
Wheel Offset Example:
A wheel with a +60mm offset will have an effective offset of approximately +40mm after installing a 20mm spacer.
Actual clearance must be verified with the installed wheel and tire combination.
Lightweight Aluminum/Magnesium Alloy Construction
H&R manufactures its TRAK+ wheel spacers from a proprietary aluminum and magnesium alloy developed specifically for its wheel spacer program.
This material is engineered to provide high strength while maintaining a lightweight design.
Construction advantages include:
High-strength alloy construction
Reduced unnecessary rotational mass compared with heavier materials
Precision-machined mounting surfaces
Durable structural design
Corrosion-resistant protective finish
Long-term performance in properly maintained applications
H&R manufactures these spacers in Germany using precision production processes and quality-control standards.
Black Hard-Anodized Finish
The H&R 4075644SW features a black hard-anodized finish designed to enhance surface durability and corrosion resistance.
The black finish offers a distinctive appearance compared with the standard silver version of the same wheel spacer.
Benefits include:
Increased resistance to surface corrosion
Durable protective coating
Clean black appearance
Complementary styling with dark wheels and performance brake components
Protection for the machined alloy surface
The black anodized construction makes these spacers an excellent choice for enthusiasts seeking a discreet appearance behind their wheels.
Factory and Aftermarket Wheel Compatibility
The H&R 4075644SW can be used with compatible factory or aftermarket wheels when all installation requirements are satisfied.
Before installation, verify:
Correct 5x120 wheel bolt pattern
Proper 64.1mm hubcentric interface
Compatible M14x1.5 wheel mounting hardware
Adequate clearance for any protruding factory studs
Sufficient wheel relief pocket depth, where required
Proper lug nut seat configuration
Adequate brake caliper clearance
Sufficient fender and suspension clearance
Important: The factory wheel studs may extend beyond the spacer mounting surface. The wheel must have sufficient clearance for this protrusion, or the installation must otherwise comply with H&R's instructions.
Do not install the spacers if the wheel cannot seat completely against the spacer mounting surface.
Common Reasons for Replacement
Recessed Factory Wheels: Move factory wheels outward for a more aggressive stance.
Wheel Fitment Adjustments: Correct the appearance of wheels with a high positive offset.
Aftermarket Suspension Installation: Refine wheel positioning after suspension modifications.
Custom Wheel Setup: Achieve the desired wheel-to-fender relationship.
Improved Vehicle Appearance: Create a wider, more purposeful stance.
Track Width Adjustment: Increase track width as part of a properly engineered suspension setup.
Hubcentric Spacer Upgrade: Replace improperly sized or low-quality wheel spacers.
Damaged Existing Spacers: Replace worn, corroded, or damaged wheel spacer assemblies.
Black Finish Preference: Upgrade from standard silver spacers to a black anodized version.
Installation Notes
Verify Vehicle Fitment: Confirm the vehicle uses a 5x120 bolt pattern, 64.1mm hub center, and M14x1.5 wheel studs.
Confirm Spacer Thickness: Ensure 20mm per side provides the desired wheel position without creating interference.
Inspect Wheel Compatibility: Verify the wheels have the correct mounting configuration and adequate clearance for the DRM spacer system.
Raise the Vehicle Safely: Support the vehicle using appropriate lifting equipment and jack stands.
Remove the Wheels: Remove the existing wheel lug nuts and wheels.
Clean the Hub Surface: Remove dirt, corrosion, and debris from the hub mounting surface.
Inspect Factory Wheel Studs: Check the studs and threads for damage before installation.
Position the Spacer: Install the H&R spacer onto the existing factory wheel studs.
Install Supplied Mounting Nuts: Use the special nuts supplied with the DRM spacer kit.
Torque the Spacer Hardware: Follow H&R's vehicle-specific torque specifications and tightening sequence.
Verify Factory Stud Clearance: Ensure any protruding factory studs will not prevent the wheel from seating completely.
Install the Wheel: Mount the wheel onto the studs integrated into the spacer.
Use Correct Wheel Lug Nuts: Confirm lug nut thread pitch and seat style match the wheel and spacer studs.
Torque the Wheel Hardware: Tighten all wheel lug nuts according to the applicable specifications.
Check Wheel Clearance: Verify clearance around the fenders, brake components, and suspension.
Check Steering and Suspension Travel: Confirm there is no interference through the full range of steering and suspension movement.
Perform a Road Test: Check for abnormal vibration, noise, or interference.
Recheck Fastener Torque: Follow H&R's recommended inspection and retorque procedure after initial use.
Important Installation Note: Do not use impact tools to tighten the spacer mounting nuts. Follow H&R's installation instructions and use a calibrated torque wrench.
Professional installation is recommended.
What's Included
(2) H&R TRAK+ DRM 20mm Wheel Spacers – Black Anodized
(10) Integrated M14x1.5 Wheel Studs – Five Per Spacer
(10) Special Silver Mounting Nuts – Five Per Spacer
Not Included:
Wheels
Tires
Wheel Lug Nuts for Securing the Wheels to the Spacer Studs
Wheel Locks
Vehicle-Specific Tools
Quantity Note: One kit includes two wheel spacers, sufficient for one axle. Two kits are required to equip all four wheels.
Upgrade the stance and wheel fitment of your Honda Civic Type R or Acura Integra Type S with the H&R TRAK+ DRM 20mm Hubcentric Wheel Spacer Kit (4075644SW).
Featuring precision-machined aluminum/magnesium alloy construction, a durable black hard-anodized finish, 5x120 bolt pattern, 64.1mm center bore, M14x1.5 integrated wheel studs, and H&R's proven DRM bolt-on mounting system, these spacers deliver premium German engineering and precise wheel positioning.
Whether you're looking to achieve a more aggressive factory-wheel stance, refine an aftermarket suspension setup, or move your wheels closer to the fender line, the H&R 4075644SW Wheel Spacer Kit provides a durable, hubcentric solution designed specifically for compatible high-performance Honda and Acura applications.
| Part Number: | 4075644SW |
| Brand: | H&R |
| Color: | Black |
| Thread Pitch: | M14 x 1.5 |
| Bolt Pattern: | 5 x 120 |
| Width: | 20 mm |
| Wheel/Hub Bore: | 64.1 |
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
| Year | Make | Model | Trim |
|---|---|---|---|
| 2023 | Honda | Civic | Type R |
| 2024 | Acura | Integra | Type S |
| 2024 | Honda | Civic | Type R |
| 2025 | Acura | Integra | Type S |
| 2025 | Honda | Civic | Type R |
| 2026 | Acura | Integra | Type S |
| 2026 | Honda | Civic | Type R |
Reviews
No Reviews Yet!
Write a Review