Product Details
The H&R TRAK+ DRM 15mm Hubcentric Wheel Spacer Kit (3075644SW) is a premium German-engineered wheel spacer solution designed to improve wheel positioning, increase track width, and create a wider, more aggressive stance on compatible Honda Civic Type R and Acura Integra Type S models.
Featuring a 15mm thickness per spacer, 5x120 bolt pattern, 64.1mm hubcentric center bore, M14x1.5 wheel studs, and a durable black anodized finish, the H&R 3075644SW offers precise wheel fitment with a clean, performance-oriented appearance.
Manufactured in Germany using H&R's proprietary high-strength aluminum alloy, TRAK+ wheel spacers are engineered to provide excellent strength, low weight, and corrosion resistance. Their precision-machined hubcentric construction helps maintain proper wheel alignment and secure mounting.
The DRM Series utilizes a bolt-on design that attaches directly to the vehicle's existing wheel studs using specially designed mounting nuts. Once installed, the wheels attach to the integrated studs on the spacer assemblies.
This design eliminates the need for extended factory wheel studs in properly configured applications and provides a dedicated mounting system for each wheel.
With a 15mm increase in wheel position per side, the H&R 3075644SW effectively reduces wheel offset by 15mm, moving the wheels outward approximately 0.59 inches. When installed on both sides of an axle, the spacers increase total track width by approximately 30mm.
This makes them an excellent choice for enthusiasts looking to improve the appearance of factory wheels, fine-tune aftermarket wheel fitment, or complement a lowered suspension setup.
Whether upgrading a 2023–2026 Honda Civic Type R FL5 or a 2024–2026 Acura Integra Type S DE5, the H&R 3075644SW provides precision engineering, reliable construction, and a distinctive black finish.
Features
15mm Spacer Thickness: Moves each wheel outward approximately 0.59 inches.
30mm Total Track Width Increase: Adds approximately 1.18 inches of track width when installed on both sides of an axle.
5x120 Bolt Pattern: Designed for compatible five-lug Honda and Acura applications.
64.1mm Hubcentric Center Bore: Precision-machined to match compatible factory hubs.
M14x1.5 Wheel Studs: Integrated studs provide a dedicated wheel mounting interface.
DRM Bolt-On Design: Spacers attach directly to the existing factory wheel studs.
Special Mounting Nuts Included: Designed specifically for securing the spacers to the vehicle hubs.
Black Anodized Finish: Provides a clean appearance and additional surface protection.
High-Strength Aluminum Alloy: Proprietary lightweight material engineered for wheel spacer applications.
Precision Hubcentric Construction: Helps maintain accurate wheel centering and consistent mounting alignment.
CNC-Machined Mounting Surfaces: Designed for accurate dimensional fitment.
Improved Wheel Positioning: Reduces the recessed appearance of factory wheels.
Aggressive Vehicle Stance: Moves the wheels closer to the outer fender line.
Factory Wheel Compatibility: Suitable for compatible OEM wheels when all clearance requirements are satisfied.
Aftermarket Wheel Compatibility: Can be used with properly matched aftermarket wheels.
No Extended Factory Studs Required: DRM mounting system uses the existing hub studs and integrated spacer studs.
German Engineering: Designed and manufactured by H&R Special Springs in Germany.
Sold as a Pair: Includes two wheel spacers for one axle.
Complete Spacer Mounting Hardware: Includes the special nuts required to secure the spacers to the hubs.
Popular Performance Applications
Honda Civic Type R FL5 Wheel Fitment Upgrades
Acura Integra Type S DE5 Wheel Fitment Upgrades
Factory Wheel Stance Improvements
Flush Wheel and Fender Fitment
Aggressive Street Performance Builds
Lowered Suspension Applications
Aftermarket Coilover Installations
Performance Wheel Fitment Adjustments
Custom Wheel Offset Configurations
Wider Track Width Setups
Street and Track-Inspired Builds
OEM Wheel Positioning Improvements
Additional Information
- Manufacturer: H&R Special Springs
- Manufacturer Part Number: 3075644SW
- Product Series: TRAK+
- Spacer Series: DRM
- Product Type: Hubcentric Bolt-On Wheel Spacer Kit
- Spacer Thickness: 15mm Per Side
- Spacer Thickness in Inches: Approximately 0.59 Inches
- Total Track Width Increase: 30mm Per Axle
- Wheel Bolt Pattern: 5x120
- Center Bore: 64.1mm
- Wheel Stud Thread Pitch: M14x1.5
- Spacer Material: High-Strength Aluminum Alloy
- Spacer Finish: Black Anodized
- Manufacturing Process: Precision Machined
- Hubcentric: Yes
- Integrated Wheel Studs: Yes
- Factory Stud Replacement Required: No, when installed according to H&R requirements
- Mounting Configuration: DRM Bolt-On
- Spacer Mounting Hardware: Special Nuts Included
- Quantity: Two Wheel Spacers
- Vehicle Application: 2023–2026 Honda Civic Type R FL5 / 2024–2026 Acura Integra Type S DE5
- Country of Manufacture: Germany
H&R TRAK+ DRM Bolt-On Wheel Spacer Design
The H&R 3075644SW uses H&R's DRM wheel spacer mounting system.
Unlike conventional slip-on spacers, DRM spacers attach directly to the vehicle's existing wheel studs using specially designed mounting nuts.
The wheels then mount to the integrated studs on the spacers.
This configuration provides a dedicated mounting arrangement between the vehicle hub and wheel.
The DRM system offers several advantages:
Secure bolt-on mounting design
Integrated wheel mounting studs
No extended factory studs required in approved applications
Precision hubcentric fitment
Convenient integration with compatible factory wheels
Durable construction for performance applications
Important: The factory wheel studs must not interfere with the back of the wheel. Verify adequate wheel relief pocket clearance before installation.
Precision 64.1mm Hubcentric Construction
The H&R 3075644SW features a precision-machined 64.1mm center bore designed for compatible Honda and Acura hubs.
Hubcentric spacers help maintain proper wheel centering by providing a correctly sized interface between the hub, spacer, and wheel.
This is particularly important on high-performance vehicles where accurate wheel alignment and secure mounting are essential.
Benefits include:
Accurate hub-to-spacer alignment
Consistent wheel positioning
Proper contact between mounting surfaces
Reduced potential for centering-related vibration
Precision fitment for compatible factory hubs
Improved mounting consistency
The hubcentric design is intended to work with properly matched wheels and correctly installed mounting hardware.
15mm Thickness and Improved Wheel Stance
The H&R 3075644SW provides a 15mm outward wheel position adjustment per side.
This can help improve the appearance of factory wheels by positioning them closer to the outer fender line.
When installed on both sides of an axle, the spacers increase total track width by approximately 30mm.
Potential benefits include:
More aggressive wheel positioning
Reduced recessed-wheel appearance
Improved visual balance
Increased flexibility when adjusting wheel fitment
Wider overall stance
Better alignment of wheel position with the fender line
Wheel Offset Example:
A wheel with a +60mm offset will have an effective offset of approximately +45mm after installing a 15mm spacer.
The actual fitment depends on the wheel width, tire size, suspension setup, and available fender clearance.
High-Strength Lightweight Alloy Construction
H&R manufactures its TRAK+ wheel spacers using a proprietary high-strength aluminum alloy engineered specifically for wheel spacer applications.
This material is designed to provide excellent strength while minimizing unnecessary weight.
Construction advantages include:
High-strength alloy material
Lightweight design
Precision-machined mounting surfaces
Durable hubcentric construction
Corrosion-resistant anodized finish
Reliable fitment in properly configured applications
H&R designs and manufactures its wheel spacers in Germany.
Black Anodized Finish
The H&R 3075644SW features a black anodized finish that distinguishes it from the standard silver 3075644 version.
The protective surface treatment enhances corrosion resistance while providing a clean, understated appearance.
Benefits include:
Black performance-oriented finish
Improved surface corrosion resistance
Durable protective coating
Complementary appearance with dark wheels
Discreet styling behind factory or aftermarket wheels
The black finish makes these spacers an excellent choice for enthusiasts seeking a more subtle appearance.
Factory and Aftermarket Wheel Compatibility
The H&R 3075644SW can be used with compatible factory and aftermarket wheels when all mounting requirements are satisfied.
Before installation, verify:
Correct 5x120 bolt pattern
Proper 64.1mm hubcentric interface
Compatible M14x1.5 wheel mounting hardware
Adequate clearance for protruding factory studs
Sufficient relief pockets on the back of the wheels, where required
Correct lug nut seat configuration
Adequate brake caliper clearance
Sufficient fender and suspension clearance
Full contact between the wheel and spacer mounting surfaces
Important: A 15mm spacer may not fully cover the length of the original factory wheel studs. The wheel must have adequate relief pockets or another H&R-approved mounting solution to prevent interference.
Never install a wheel that cannot seat completely against the spacer.
Common Reasons for Replacement
Recessed Factory Wheels: Move wheels outward for a more aggressive stance.
Wheel Offset Adjustment: Reduce effective positive wheel offset by 15mm.
Aftermarket Suspension Installation: Refine wheel positioning after lowering the vehicle.
Custom Wheel Fitment: Achieve the desired wheel-to-fender relationship.
Factory Wheel Appearance Upgrade: Improve the stance without purchasing new wheels.
Track Width Adjustment: Increase track width as part of a properly engineered suspension setup.
Hubcentric Spacer Upgrade: Replace improperly sized or low-quality spacers.
Damaged Wheel Spacers: Replace worn, corroded, or damaged spacer assemblies.
Black Finish Preference: Upgrade from standard silver spacers to a black anodized version.
Installation Notes
Verify Vehicle Fitment: Confirm the vehicle uses a 5x120 bolt pattern, 64.1mm hub center, and M14x1.5 wheel studs.
Confirm Spacer Thickness: Ensure 15mm per side provides the desired wheel position without creating interference.
Inspect Wheel Compatibility: Verify the wheels are compatible with the DRM mounting system.
Raise the Vehicle Safely: Support the vehicle using appropriate lifting equipment and jack stands.
Remove the Wheels: Remove the existing wheel lug nuts and wheels.
Clean the Hub Surface: Remove corrosion, dirt, and debris from the hub mounting surface.
Inspect Factory Wheel Studs: Check the studs and threads for wear or damage.
Position the Spacer: Install the H&R spacer onto the existing factory wheel studs.
Install Supplied Mounting Nuts: Use the special nuts supplied with the DRM spacer kit.
Torque the Spacer Hardware: Follow H&R's installation instructions and the applicable torque specifications.
Verify Factory Stud Clearance: Confirm the original wheel studs will not prevent the wheel from seating completely.
Install the Wheel: Mount the wheel onto the studs integrated into the spacer.
Use Correct Wheel Lug Nuts: Verify thread pitch and lug nut seat compatibility.
Torque the Wheel Hardware: Tighten the wheel lug nuts according to the applicable specifications.
Inspect Wheel Clearance: Check for interference with brake components, suspension parts, and fenders.
Check Steering and Suspension Travel: Confirm adequate clearance throughout the full range of movement.
Perform a Road Test: Check for unusual vibration, noise, or interference.
Recheck Fastener Torque: Follow H&R's recommended inspection and retorque procedure.
Installation Recommendation: Professional installation is recommended. Always use a calibrated torque wrench and follow the manufacturer's mounting instructions.
What's Included
(2) H&R TRAK+ DRM 15mm Wheel Spacers – Black Anodized
(10) Integrated M14x1.5 Wheel Studs – Five Per Spacer
(10) Special Spacer Mounting Nuts – Five Per Spacer
Not Included:
Wheels
Tires
Wheel Lug Nuts for Securing the Wheels to the Spacer Studs
Wheel Locks
Vehicle-Specific Installation Tools
Quantity Note: One kit includes two wheel spacers, sufficient for one axle. Two kits are required to equip all four wheels.
Upgrade the stance and wheel fitment of your Honda Civic Type R or Acura Integra Type S with the H&R TRAK+ DRM 15mm Hubcentric Wheel Spacer Kit (3075644SW).
Featuring precision-machined high-strength alloy construction, a black anodized finish, 5x120 bolt pattern, 64.1mm center bore, M14x1.5 integrated wheel studs, and H&R's DRM bolt-on mounting system, these spacers deliver premium German engineering and precise wheel positioning.
Whether you're looking to achieve a more aggressive factory-wheel stance, refine an aftermarket suspension setup, or move your wheels closer to the fender line, the H&R 3075644SW Wheel Spacer Kit provides a durable, hubcentric solution designed for compatible high-performance Honda and Acura applications.
| Part Number: | 3075644SW |
| Brand: | H&R |
| Color: | Black |
| Thread Pitch: | M14 x 1.5 |
| Bolt Pattern: | 5 x 120 |
| Width: | 15 mm |
| Wheel/Hub Bore: | 64.1 |
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
| Year | Make | Model | Trim |
|---|---|---|---|
| 2023 | Honda | Civic | Type R |
| 2024 | Acura | Integra | Type S |
| 2024 | Honda | Civic | Type R |
| 2025 | Acura | Integra | Type S |
| 2025 | Honda | Civic | Type R |
| 2026 | Acura | Integra | Type S |
| 2026 | Honda | Civic | Type R |
Reviews
No Reviews Yet!
Write a Review