Take your second-generation Honda Fit to the next level with the Hasport GEK2 K-Series Engine Swap Mount Kit, designed for installing compatible Honda K20 and K24 engines into the 2009–2014 Honda Fit GE chassis using a 2003–2007 Honda Accord or 2004–2008 Acura TSX manual transmission.

Engineered specifically for Honda enthusiasts looking to replace the factory L-Series engine with a more powerful K-Series drivetrain, the Hasport GEK2 provides the mounting foundation needed for proper engine positioning, transmission alignment, and drivetrain stability.

The lightweight Honda Fit chassis makes an excellent platform for naturally aspirated, turbocharged, and track-oriented K-Series builds. However, installing a K20 or K24 engine requires specialized mounting components to accommodate the larger drivetrain and the differences between factory Honda transmission configurations.

The Hasport GEK2 addresses these challenges with precision-engineered mounting brackets, performance polyurethane bushings, and Hasport's innovative dual-height mounting system.

Designed for Honda Accord and Acura TSX Manual Transmissions

The GEK2 is specifically designed for compatible manual transmissions originally found in the following vehicles:

• 2003–2007 Honda Accord

• 2004–2008 Acura TSX

These transmissions use different mounting configurations than those found in the Acura RSX and Honda Civic Si, making transmission selection an important consideration when choosing the correct Hasport GE-series mount kit.

The GEK2 is engineered to accommodate these Accord and TSX manual transmissions in the GE Honda Fit chassis.

Hasport Dual-Height Engine Mounting System

One of the most important features of the Hasport GEK2 is its dual-height engine mounting design.

Honda K20 and K24 engines have different block heights, which can affect engine placement, hood clearance, and the positioning of intake and exhaust components.

Hasport's dual-height system is designed to maintain a consistent cylinder head position between compatible K20 and K24 applications.

This provides several advantages:

• Accommodates the different block heights of K20 and K24 engines.

• Maintains more consistent cylinder head positioning.

• Helps optimize engine placement within the Honda Fit engine bay.

• Supports appropriate axle alignment.

• Helps maintain intake and exhaust system clearance.

• Provides more consistent packaging for compatible turbocharger systems.

• Helps optimize ground and hood clearance.

The dual-height system allows enthusiasts to select a compatible K20 or K24 engine while maintaining the intended drivetrain mounting geometry.

Precision-Engineered Construction

Hasport manufactures its engine mounting systems using precision-engineered components and application-specific brackets designed to provide dependable drivetrain support.

The GEK2 incorporates durable mounting components engineered for the demands of street performance, autocross, track driving, and custom K-Series builds.

Performance Polyurethane Bushings

The Hasport GEK2 utilizes performance polyurethane bushings to help reduce excessive engine and transmission movement.

Compared with conventional factory rubber mounts, polyurethane bushings provide increased resistance to drivetrain movement during acceleration, deceleration, and gear changes.

This helps maintain more consistent engine positioning and can improve drivetrain response.

Hasport offers multiple bushing hardness options so builders can select the appropriate balance between drivetrain control and passenger comfort.

Features

• 2009–2014 Honda Fit Compatibility: Designed for the second-generation GE chassis.

• K-Series Engine Swap Design: Supports compatible Honda K20 and K24 engines.

• Accord/TSX Transmission Compatibility: Engineered for 2003–2007 Honda Accord and 2004–2008 Acura TSX manual transmissions.

• Dual-Height Mounting System: Accommodates differences in K20 and K24 engine block heights.

• Optimized Engine Placement: Designed for proper drivetrain positioning and clearance.

• Precision-Engineered Mounting Components: Provides application-specific fitment.

• Durable Mounting Brackets: Designed to support performance-oriented K-Series drivetrains.

• Performance Polyurethane Bushings: Help reduce excessive drivetrain movement.

• Reduced Engine Rocking: Limits unwanted engine movement under acceleration and deceleration.

• Improved Drivetrain Response: Helps maintain more consistent powertrain positioning.

• Improved Shifting Consistency: Firmer mounts help stabilize the transmission during gear changes.

• Reduced Mount Deflection: Provides increased resistance to drivetrain movement compared with factory rubber mounts.

• Street and Competition Applications: Suitable for a wide range of performance builds.

• Multiple Bushing Hardness Options: Allows selection based on intended vehicle use.

• CAD/CAM Engineered: Designed using computer-aided engineering technology.

• Lifetime Manufacturer Warranty: Backed by Hasport's lifetime warranty, subject to manufacturer terms.

Popular Performance Applications

Honda Fit K20 Engine Swaps

Provides an application-specific mounting solution for installing a compatible K20 engine into the second-generation Honda Fit.

Honda Fit K24 Engine Swaps

Supports compatible K24-powered GE Honda Fit projects.

Acura TSX Drivetrain Conversions

Allows builders to utilize a compatible Acura TSX manual transmission with a K-Series engine.

Honda Accord K-Series Drivetrain Swaps

Designed for supported K-Series manual transmissions originally found in the 2003–2007 Accord.

Naturally Aspirated K-Series Builds

Provides dependable drivetrain support for modified K20 and K24 engines.

Turbocharged Honda Fit Builds

The dual-height mounting system helps maintain predictable engine positioning for custom forced-induction applications.

Street Performance Vehicles

Softer polyurethane bushings provide increased drivetrain control while retaining some vibration isolation.

Autocross and Track Applications

Firmer bushings help minimize drivetrain movement during aggressive driving.

Drag Racing Applications

The stiffest bushing options prioritize drivetrain rigidity for dedicated competition vehicles.

Additional Information

• Manufacturer: Hasport Performance
• Part Number: GEK2
• Product Type: K-Series Engine Swap Mount Kit
• Vehicle Application: 2009–2014 Honda Fit
• Chassis: GE
• Engine Compatibility: Compatible Honda K20 / K24
• Transmission Compatibility: 2003–2007 Honda Accord / 2004–2008 Acura TSX Manual
• Mounting System: Dual-Height K-Series Engine Mounting Design
• Bushing Material: Polyurethane
• Installation Type: K-Series Engine Swap Conversion
• Warranty: Hasport Lifetime Manufacturer Warranty, subject to terms

Available Polyurethane Bushing Hardness Options

U62A – Street

The softest bushing option, designed for street-driven vehicles where vibration isolation is an important consideration.

U70A – Race

Provides increased drivetrain rigidity for aggressive street and performance applications.

U88A – Extreme Race

A firmer polyurethane configuration intended for demanding track and competition use.

94A – Most Extreme Race

The stiffest available configuration, intended for dedicated competition builds where minimizing drivetrain movement takes priority over passenger comfort.

Higher-durometer bushings generally transmit more engine vibration into the chassis.

GEK1 vs. GEK2 vs. GEK3

Hasport GEK1: Designed for Acura RSX and 2002–2011 Honda Civic Si manual transmissions.

Hasport GEK2: Designed for 2003–2007 Honda Accord and 2004–2008 Acura TSX manual transmissions.

Hasport GEK3: Designed for later compatible Accord, TSX, and Civic Si manual transmissions.

The correct mount kit must be selected according to the transmission being installed, not just the engine.

Common Reasons for Replacement or Upgrade

• K20 Engine Swap: Provides the specialized mounting components required for a compatible K20-powered Honda Fit.

• K24 Engine Swap: Supports installation of a compatible K24 drivetrain.

• Accord/TSX Transmission Installation: Accommodates the supported manual transmission mounting configuration.

• Factory L-Series Engine Replacement: Allows enthusiasts to pursue a K-Series drivetrain conversion.

• Improved Performance Potential: Opens access to a broad range of K-Series performance upgrades.

• Proper Drivetrain Positioning: Helps maintain appropriate engine and transmission alignment.

• Dual-Height Engine Compatibility: Accommodates differences between K20 and K24 block heights.

• Reduced Engine Movement: Polyurethane bushings help limit excessive drivetrain rocking.

• Improved Shifting Consistency: Firmer mounts help stabilize the transmission.

• Street and Track Performance: Provides a durable foundation for performance-oriented Honda Fit builds.

Installation Notes

1. Verify Vehicle Compatibility: Confirm that the vehicle is a supported 2009–2014 Honda Fit GE chassis.

2. Confirm Engine Selection: Identify the exact K20 or K24 engine being installed.

3. Verify Transmission Compatibility: Confirm that the transmission is from a supported 2003–2007 Honda Accord or 2004–2008 Acura TSX configuration.

4. Select the Correct Engine Configuration: Ensure the mounting components match the selected K20 or K24 engine.

5. Inspect Engine-Side Mounting Points: Confirm that the engine has the required mounting provisions and brackets.

6. Plan the Complete K-Series Swap: Additional components will be required, including wiring, ECU, axles, shifter components, cooling system modifications, and other supporting parts.

7. Prepare the Engine Bay: Inspect the chassis and surrounding components for required clearance and installation modifications.

8. Support the Engine and Transmission: Properly support the drivetrain during installation.

9. Install the Engine Mounting Components: Follow Hasport's application-specific installation instructions.

10. Install the Transmission Mounting Components: Position the supplied mounts and brackets according to the supported transmission configuration.

11. Verify Engine Height: Confirm the correct dual-height mounting arrangement for the selected K20 or K24 engine.

12. Check Axle Alignment: Verify appropriate axle engagement, operating angles, and clearance.

13. Inspect Hood Clearance: Confirm adequate clearance between the engine and hood.

14. Inspect Ground Clearance: Check oil pan, exhaust, and other underbody component clearances.

15. Verify Intake and Exhaust Fitment: Confirm that the selected intake, header, and turbocharger components fit the installed drivetrain configuration.

16. Inspect Cooling System Clearance: Check radiator, fans, hoses, and surrounding components.

17. Verify Shifter Compatibility: Ensure that the transmission is paired with the correct shifter assembly and cables.

18. Inspect Mounting Hardware: Use the supplied hardware and any specified factory fasteners according to Hasport's instructions.

19. Align the Drivetrain Before Tightening: Avoid placing unnecessary preload on the polyurethane bushings.

20. Torque Mounting Hardware: Follow Hasport's instructions and applicable Honda service specifications.

21. Select the Appropriate Bushing Hardness: Consider the vehicle's intended use and acceptable vibration level.

22. Expect Increased Vibration: Performance polyurethane mounts generally transmit more vibration into the chassis than factory rubber mounts.

23. Inspect After Installation: Recheck mounting hardware and component clearances after the initial driving period.

24. Professional Installation Recommended: K-Series swaps require mechanical, electrical, and fabrication experience. Installation by an experienced Honda performance specialist is recommended.

What's Included

• Hasport GEK2 K-Series engine swap mounting components

• Application-specific engine and transmission mounting brackets

• Polyurethane mount bushings in the selected hardness configuration

• Associated mounting hardware supplied by Hasport

Important: The exact mounting components and brackets depend on the selected K20 or K24 configuration.

The engine, transmission, axles, ECU, engine wiring harness, shifter assembly, shift cables, fuel system components, cooling system components, and other swap-related parts are not included unless separately specified.

Verify additional engine-side bracket requirements for your specific K-Series engine before installation.

Transform your second-generation Honda Fit with the Hasport GEK2 K-Series Engine Swap Mount Kit, engineered for 2009–2014 Honda Fit GE chassis applications using compatible K20 or K24 engines and 2003–2007 Honda Accord or 2004–2008 Acura TSX manual transmissions.

Featuring Hasport's dual-height mounting system, precision-engineered mounting components, and performance polyurethane bushings, the GEK2 provides the drivetrain positioning, strength, and stability needed for a successful K-Series conversion.

Whether you're building a naturally aspirated K20-powered street car, a K24-swapped track vehicle, or a turbocharged Honda Fit performance project, Hasport delivers the mounting foundation needed to bring your build together.