Take your fourth-generation Honda Accord build to the next level with the Hasport CB1KAWD K-Series AWD Engine Swap Mount Kit, designed for builders converting a 1990–1993 Honda Accord CB chassis to a Honda K-Series engine and compatible all-wheel-drive drivetrain.

Unlike conventional K-Series swap mount kits intended for front-wheel-drive manual transmissions, the CB1KAWD is designed around the specialized mounting requirements of an AWD K-Series conversion.

This application-specific mounting system provides a foundation for installing a compatible K20 or K24 engine with an appropriately configured AWD transmission. It is intended for custom performance builds where drivetrain positioning, component clearance, and mounting strength are critical.

Whether you're planning a turbocharged K24 AWD Accord, a dedicated drag racing project, or a custom street-performance build, the Hasport CB1KAWD offers a purpose-built alternative to fabricating an engine mounting system entirely from scratch.

Designed for Fourth-Generation Accord AWD Conversions

The 1990–1993 Honda Accord was originally manufactured with a front-wheel-drive drivetrain in U.S.-market applications. Converting this platform to all-wheel drive requires extensive modifications beyond a conventional engine swap.

The Hasport CB1KAWD addresses the engine and transmission mounting portion of the conversion, allowing builders to plan their drivetrain installation around an AWD-specific mounting arrangement.

An AWD conversion also requires a compatible transmission and transfer assembly, driveshaft, rear differential, rear suspension and subframe modifications, and additional fabrication.

Important: The CB1KAWD is not a complete AWD conversion package. It does not independently convert a front-wheel-drive Accord into an all-wheel-drive vehicle.

Features

• 1990–1993 Honda Accord Application: Intended for fourth-generation Accord CB chassis conversions.

• K-Series Engine Swap Design: Developed for compatible Honda K-Series engine installations.

• AWD-Specific Configuration: Designed for an all-wheel-drive drivetrain conversion rather than a conventional FWD transmission swap.

• Custom Performance Applications: Suitable for properly engineered street, drag racing, and motorsport projects.

• Application-Specific Mounting Geometry: Helps establish the engine and transmission position within the chassis.

• Performance Drivetrain Support: Intended to control excessive engine movement under load.

• Hasport Engineering: Purpose-built mounting components developed for Honda drivetrain conversions.

• Polyurethane Mount Bushings: Performance-oriented mounting design with bushing selection dependent on the ordered configuration.

• Fabrication-Friendly Foundation: Provides a starting point for integrating an AWD drivetrain into a custom Accord build.

Popular Performance Applications

K24 AWD Accord Conversions

Provides a specialized mounting foundation for custom K24-powered, all-wheel-drive Accord builds.

Turbocharged AWD Performance Builds

Suitable as part of a properly engineered turbocharged K-Series drivetrain conversion where improved traction is a primary goal.

Drag Racing Applications

Supports the engine mounting portion of a custom AWD drag racing project designed for high-load acceleration.

Custom Motorsport Fabrication

Provides a purpose-built mounting starting point for fabricators integrating an AWD K-Series drivetrain into the fourth-generation Accord chassis.

High-Performance Street Builds

Can be incorporated into custom AWD street projects where drivetrain packaging, structural modifications, and supporting systems have been properly engineered.

Additional Information

• Manufacturer: Hasport Performance
• Part Number: CB1KAWD
• Product Type: K-Series AWD Engine Swap Mount Kit
• Vehicle Application: 1990–1993 Honda Accord
• Chassis Compatibility: CB – Fourth Generation
• Engine Platform: Honda K-Series
• Drivetrain Application: AWD Conversion
• Mounting Application: Custom Engine and AWD Transmission Installation
• Installation Type: Advanced Engine Swap and Drivetrain Conversion
• Chassis Modification Required: Yes
• Fabrication Required: Yes – AWD drivetrain integration requires substantial additional fabrication
• Bushing Configuration: Verify available hardness options for the exact CB1KAWD kit
• Transmission Compatibility: Verify exact AWD transmission application before ordering

Common Reasons for Replacement or Upgrade

• AWD Drivetrain Conversion: Provides a specialized mounting solution for a custom K-Series AWD Accord build.

• K-Series Engine Installation: Supports replacing the original F-Series drivetrain with a compatible K-Series engine.

• Improved Traction Potential: Allows builders to pursue an AWD drivetrain configuration for high-performance applications.

• Turbocharged Performance Builds: Provides engine mounting support for custom forced-induction projects.

• Drag Racing Conversions: Supports specialized drivetrain installation for competition-oriented builds.

• Custom Fabrication Projects: Reduces the need to design every engine mounting component from scratch.

• Drivetrain Stability: Performance mounting components help limit excessive engine and transmission movement.

Installation Notes

1. Verify Vehicle Compatibility: Confirm that the vehicle is a 1990–1993 Honda Accord CB chassis.

2. Confirm the Exact AWD Transmission: Verify that the selected AWD transmission and transfer assembly are compatible with the CB1KAWD mounting configuration.

3. Confirm Engine Compatibility: Identify the K-Series engine block and determine whether additional engine-side brackets are required.

4. Plan the Complete AWD Conversion: Establish the required drivetrain layout before beginning chassis modifications.

5. Inspect the Chassis: Check the frame rails, mounting locations, subframe, and surrounding structural components.

6. Prepare for Fabrication: AWD conversion requires modifications to accommodate the drivetrain, driveshaft, rear differential, and associated components.

7. Support the Drivetrain: Use appropriate engine lifting and transmission support equipment during installation.

8. Follow Hasport Mounting Instructions: Install the supplied mounts and brackets using the manufacturer's recommended procedures.

9. Verify Drivetrain Positioning: Check engine height, transmission placement, axle alignment, and transfer assembly clearance.

10. Inspect Front Axle Geometry: Confirm that the selected axles and intermediate shaft arrangement operate correctly throughout suspension travel.

11. Plan Driveshaft Routing: Verify clearance around the exhaust system, fuel system, underbody, and chassis structure.

12. Complete Rear Drivetrain Integration: Install the rear differential, rear axles, and associated mounting components using a properly engineered conversion design.

13. Verify Intake and Exhaust Clearance: Confirm compatibility with the intake manifold, header, turbocharger system, and exhaust routing.

14. Complete Supporting Systems: Install the appropriate ECU, wiring, fuel system, cooling components, clutch, shifter, and other conversion equipment.

15. Torque All Mounting Hardware: Follow Hasport and applicable Honda service specifications.

16. Inspect the Completed Conversion: Verify structural integrity, drivetrain clearance, fluid connections, and hardware security before operation.

17. Recheck After Initial Use: Inspect mounting hardware, drivetrain alignment, and fabricated components after initial testing.

Professional installation and fabrication are strongly recommended. AWD conversions involve significant structural, mechanical, and drivetrain modifications.

What's Included

The Hasport CB1KAWD is an AWD-specific K-Series engine swap mounting solution.

The exact supplied brackets, mounts, bushings, and hardware should be confirmed against the manufacturer's current CB1KAWD kit contents.

Not included as part of a conventional engine mount kit:

• K-Series engine

• AWD transmission and transfer assembly

• Driveshaft

• Rear differential

• Front and rear axles

• Rear AWD conversion hardware

• ECU and wiring harness

• Shifter and clutch components

• Fuel and cooling system modifications

• Custom fabrication and chassis conversion components

Closing Product Summary

Build a more capable fourth-generation Accord with the Hasport CB1KAWD K-Series AWD Engine Swap Mount Kit, designed for custom 1990–1993 Honda Accord conversions using a compatible K-Series engine and AWD drivetrain.

With its application-specific mounting design and performance-oriented construction, the CB1KAWD provides a foundation for builders pursuing turbocharged AWD street cars, drag racing projects, and custom motorsport applications.