Product Details
The FUELAB PRO Series Extreme Flow Inline Fuel Filter (86833) is a premium, high-capacity fuel filtration solution engineered for demanding performance applications requiring exceptional fuel flow, minimal pressure restriction, and advanced protection against fuel contamination.
Featuring a massive 10 GPM (600 GPH) advertised flow capacity, a 6-micron micro-fiberglass filter element, and -10AN male inlet and outlet connections, the FUELAB 86833 is designed for high-output fuel systems where conventional inline filters may become a restriction.
Part of FUELAB's PRO Series Extreme Flow lineup, the 86833 features an enlarged billet aluminum housing with a matte black anodized finish. Its scaled-up design provides increased filtration area and contaminant-holding capacity, helping maintain efficient fuel delivery in demanding performance environments.
The included 6-inch-long micro-fiberglass filter element provides fine-particle filtration to help protect sensitive downstream fuel system components, including fuel injectors and fuel pressure regulators.
Unlike smaller inline fuel filters, the PRO Series is designed specifically for extreme-flow applications. Its larger internal passages and high-capacity filtration media help minimize pressure drop while allowing substantial fuel volume to pass through the assembly.
The filter is compatible with gasoline, diesel, ethanol-based fuels including E85, and methanol, making it suitable for a broad range of custom performance and motorsport fuel systems.
With a 200 PSI maximum operating pressure rating, replaceable filtration element, and two included stainless steel T-bolt mounting brackets, the FUELAB 86833 provides the durability, serviceability, and flow capacity required for serious performance builds.
Whether supporting a high-horsepower turbocharged Honda K-Series engine, a large-displacement forced-induction application, or a dedicated drag racing vehicle, the FUELAB 86833 PRO Series Extreme Flow Fuel Filter delivers advanced filtration without unnecessarily compromising fuel system performance.
Features
10 GPM Extreme Flow Capacity: Advertised flow capacity of up to 600 gallons per hour for demanding performance fuel systems.
6-Micron Micro-Fiberglass Filtration: Fine-particle filtration designed to protect sensitive fuel system components.
6-Inch Filter Element: Extended-length element provides substantial filtration area and contaminant-holding capacity.
PRO Series Extreme Flow Design: Larger housing and internal passages support high-volume fuel delivery.
-10AN Male Inlet: Compatible with properly sized -10AN female fuel line fittings.
-10AN Male Outlet: Matching connection for compatible downstream fuel plumbing.
200 PSI Maximum Operating Pressure: Suitable for properly configured high-pressure fuel systems.
Billet Aluminum Construction: Precision-machined housing engineered for durability.
Matte Black Anodized Finish: Protective finish with a clean, performance-oriented appearance.
MIL-A-8625 Type II Anodizing: Manufacturer-specified anodizing standard.
Reduced Pressure Drop: Designed to minimize unnecessary fuel flow restriction.
Increased Filtration Capacity: Large filter element helps extend service intervals.
Replaceable Filter Element: Allows maintenance without replacing the complete filter assembly.
Gasoline Compatible: Suitable for pump gasoline and racing gasoline.
E85 Compatible: Supports ethanol-based fuels, including E85.
Methanol Compatible: Suitable for compatible methanol fuel systems.
Diesel Compatible: Supports properly configured diesel applications.
Stainless Steel Mounting Brackets: Includes two T-bolt-style brackets for secure installation.
Universal Performance Application: Designed for custom fuel systems using compatible -10AN plumbing.
Limited Lifetime Warranty: Backed by FUELAB's limited lifetime warranty, subject to manufacturer terms.
Vehicle Fitment
The FUELAB 86833 is a universal high-performance inline fuel filter and is not a direct-fit replacement for a specific factory fuel filter.
It is intended for custom fuel systems using compatible -10AN connections.
Honda and Acura Performance Applications
Honda Civic K20 and K24 Turbo Builds
Acura Integra K-Series Engine Swaps
Acura RSX Type-S High-Horsepower Applications
Honda S2000 Forced-Induction Builds
Honda Accord K-Series Performance Projects
Honda Prelude Custom Fuel Systems
Dedicated Honda and Acura Drag Racing Vehicles
Additional Performance Applications
Toyota Supra High-Horsepower Fuel Systems
Nissan Skyline GT-R Performance Builds
Subaru WRX and STI Turbocharged Applications
Mitsubishi Lancer Evolution Performance Vehicles
Chevrolet LS and LT Forced-Induction Builds
Ford Mustang Turbocharged and Supercharged Applications
Custom Drag Racing and Motorsport Vehicles
Important Fitment Note: These vehicles represent potential custom applications, not confirmed direct-fit installations.
Compatibility depends on fuel line dimensions, operating pressure, mounting space, filtration requirements, and overall fuel system configuration.
Popular Performance Applications
Honda K20 Turbo Fuel Systems
Honda K24 Turbo Fuel Systems
High-Horsepower K-Series Engine Swaps
E85 Performance Fuel Systems
High-Boost Forced-Induction Engines
Large-Displacement Performance Engines
Drag Racing Fuel Systems
Road Racing and Time Attack Builds
Custom High-Flow Return-Style Fuel Systems
Methanol Racing Fuel Systems
High-Output Electric Fuel Pump Installations
Multi-Pump Fuel Delivery Systems
High-Capacity Inline Fuel Filtration
Custom Motorsport Fuel Systems
Additional Information
- Manufacturer: FUELAB
- Manufacturer Part Number: 86833
- Product Series: PRO Series Extreme Flow / 868 Series
- Product Type: High-Capacity Inline Fuel Filter
- Filter Configuration: Extreme Flow / Extended-Length
- Advertised Flow Capacity: 10 GPM
- Equivalent Flow Capacity: 600 GPH / Approximately 2,271 LPH
- Filtration Rating: 6 Microns
- Filter Element Material: Micro-Fiberglass
- Filter Element Length: 6 Inches
- Filter Element Type: Replaceable / Disposable
- Fuel Inlet Size: -10AN Male
- Fuel Outlet Size: -10AN Male
- Housing Material: Billet Aluminum
- Housing Finish: Matte Black Anodized
- Anodizing Specification: MIL-A-8625 Type II
- Maximum Operating Pressure: 200 PSIG
- Fuel Compatibility: Gasoline, Diesel, Ethanol, E85, and Methanol
- Mounting Brackets: Two Included
- Mounting Bracket Type: Stainless Steel T-Bolt Style
- Integrated Check Valve: Not Advertised
- Serviceable Filter Housing: Yes
- Filter Element Cleaning: Not Recommended; Replace When Servicing
- Warranty: FUELAB Limited Lifetime Warranty
- UPC: 845096015671
- Vehicle Application: Universal / Custom Performance Fuel Systems
- Quantity: One Inline Fuel Filter Assembly
PRO Series Extreme Flow Technology
The FUELAB 86833 is part of the manufacturer's PRO Series Extreme Flow lineup, developed for fuel systems requiring exceptionally high fuel flow.
With an advertised capacity of 10 GPM, the filter provides substantial flow potential for demanding applications.
The larger housing and internal passages are designed to reduce unnecessary restrictions while maintaining effective filtration.
Potential benefits include:
High-volume fuel flow capability
Reduced pressure drop
Increased filtration area
Greater contaminant-holding capacity
Reduced maintenance frequency
Compatibility with high-output fuel delivery systems
Important: The advertised 10 GPM capacity describes the filter's flow capability, not the output of the fuel pump or complete fuel system.
Actual flow depends on fuel type, operating pressure, filter condition, plumbing dimensions, and overall system restrictions.
Advanced 6-Micron Micro-Fiberglass Filtration
The FUELAB 86833 incorporates a 6-micron micro-fiberglass filter element designed to capture fine fuel contaminants.
Fuel contamination can originate from storage tanks, deteriorating hoses, fuel system components, or debris introduced during installation.
These particles can damage precision fuel injectors, interfere with fuel pressure regulation, and contribute to inconsistent engine performance.
The micro-fiberglass element provides:
Fine-particle contaminant filtration
Protection for downstream fuel injectors
Reduced contamination-related wear
High-capacity filtration performance
Increased filter efficiency
Improved contaminant-holding capability
FUELAB identifies its micro-fiberglass filtration media as its most advanced filter element option for applications requiring additional particle protection.
Maintenance Note: The micro-fiberglass element is disposable and must be replaced rather than cleaned and reused.
Extended 6-Inch Filter Element Design
One of the defining features of the FUELAB 86833 is its extended 6-inch filter element.
Compared with smaller inline fuel filter assemblies, the PRO Series provides additional filtration area.
This helps support substantial fuel flow while increasing the amount of contamination the filter can retain before servicing is required.
Advantages include:
Larger filtration surface area
Increased contaminant-holding capacity
Reduced restriction under comparable conditions
Extended service intervals
Improved suitability for extreme-flow fuel systems
The larger housing should be considered when selecting a mounting location, as it requires more installation space than compact inline filters.
Matte Black Anodized Billet Aluminum Construction
The FUELAB 86833 features a precision-machined billet aluminum housing with a matte black anodized finish.
FUELAB specifies anodizing in accordance with MIL-A-8625 Type II.
Construction highlights include:
Billet aluminum housing
Matte black anodized exterior
Precision-machined internal passages
Serviceable filter assembly
-10AN male inlet and outlet connections
Stainless steel mounting brackets
Durable construction for demanding fuel system applications
The matte black finish complements aftermarket fuel rails, regulators, pumps, and AN fuel plumbing.
Gasoline, E85, Methanol, and Diesel Compatibility
The FUELAB 86833 is designed for compatibility with multiple automotive fuel types.
Gasoline Applications
Suitable for properly configured performance fuel systems using pump gasoline or racing gasoline.
E85 and Ethanol Applications
Compatible with ethanol-based fuels, including E85, making it useful for high-output turbocharged and supercharged engines.
Methanol Applications
Suitable for compatible methanol fuel systems commonly used in dedicated motorsport applications.
Diesel Applications
Can be incorporated into properly configured diesel fuel systems when the pressure, flow, and filtration requirements are met.
Important: The complete fuel system must be compatible with the selected fuel, including pumps, regulators, injectors, hoses, fittings, and seals.
High-Flow -10AN Fuel Connections
The FUELAB 86833 features -10AN male inlet and outlet connections.
These connections are commonly used in custom performance fuel systems requiring substantial fuel delivery capacity.
Advantages include:
Standardized AN plumbing compatibility
High-flow fuel line integration
Convenient installation with compatible hose ends
Reduced need for restrictive adapters
Suitable connection size for demanding fuel systems
Important: The filter's -10AN connections do not automatically mean every fuel system requires -10AN plumbing. Fuel line sizing should be determined according to the complete system's requirements.
Replaceable Filter Element and Serviceability
The FUELAB 86833 features a replaceable 6-inch micro-fiberglass filter element.
This allows the internal filtration media to be serviced while retaining the billet aluminum housing.
Routine maintenance is especially important for high-flow fuel systems using multiple pumps, alternative fuels, or custom fuel tanks.
Benefits include:
Replaceable filtration element
Reusable billet aluminum housing
Convenient service access
Reduced long-term maintenance costs
Increased contaminant-holding capacity
Continued protection for downstream fuel system components
Important: The 6-micron micro-fiberglass element is not designed to be cleaned. Replace it with the appropriate FUELAB replacement element during service.
Common Reasons for Replacement
Insufficient Fuel Filter Flow: Upgrade from a restrictive filter in a high-output fuel system.
High-Horsepower Fuel System Build: Add filtration designed for substantial fuel flow.
E85 Conversion: Install a filter compatible with ethanol-based performance fuels.
Turbocharger Installation: Protect injectors and regulators in a high-output fuel system.
Multi-Pump Fuel System: Support a properly configured high-volume fuel delivery setup.
Custom -10AN Fuel Plumbing: Incorporate an extreme-flow filter into aftermarket fuel lines.
K-Series Engine Swap: Upgrade filtration for a high-performance K20 or K24 installation.
Motorsport Preparation: Improve filtration capacity and serviceability for racing applications.
Damaged Filter Housing: Replace a worn or damaged inline filter.
Increased Filtration Capacity: Upgrade to a larger filter element for demanding applications.
Installation Notes
Verify Fuel System Compatibility: Confirm the -10AN inlet and outlet connections match the intended fuel plumbing.
Confirm Flow Requirements: Ensure the filter is appropriately sized for the fuel pump and engine's fuel demand.
Check Operating Pressure: Verify the system operates within the filter's 200 PSIG maximum pressure rating.
Confirm Fuel Compatibility: Ensure all fuel system components are compatible with the selected fuel.
Disconnect Battery Power: Isolate the electrical system before beginning installation.
Relieve Fuel Pressure: Safely depressurize the fuel system before disconnecting fuel lines.
Select a Suitable Mounting Location: Install the filter away from excessive heat, moving components, and potential impact hazards.
Verify Installation Clearance: Allow adequate space for the larger PRO Series housing and service access.
Install the Mounting Brackets: Secure the two supplied stainless steel T-bolt mounting brackets.
Verify Fuel Flow Direction: Install the filter according to the manufacturer's inlet and outlet markings.
Connect the Inlet Fuel Line: Use a compatible -10AN female connection.
Connect the Outlet Fuel Line: Attach the downstream fuel line using the appropriate -10AN fitting.
Follow AN Fitting Requirements: Do not apply thread sealant to AN flare sealing surfaces.
Secure the Filter Assembly: Confirm the filter is properly supported and protected from vibration.
Inspect Fuel Plumbing: Check for kinks, abrasion, and interference with surrounding components.
Prime the Fuel System: Follow the fuel pump manufacturer's recommended procedure.
Check for Leaks: Inspect all connections before starting the engine.
Verify Fuel Pressure: Confirm the system maintains proper pressure during operation.
Monitor Under Load: Check fuel pressure during controlled performance testing.
Service the Filter Element: Replace the disposable micro-fiberglass element according to the manufacturer's maintenance recommendations.
Installation Recommendation: Professional installation is recommended for high-pressure fuel systems, multi-pump installations, and high-horsepower performance applications.
What's Included
(1) FUELAB PRO Series Extreme Flow Inline Fuel Filter Assembly – 86833
(1) Installed 6-Inch 6-Micron Micro-Fiberglass Filter Element
(2) Stainless Steel T-Bolt Style Mounting Brackets
Integrated -10AN Male Inlet and Outlet Connections
Not Included:
Fuel Pump
Fuel Pressure Regulator
Vehicle-Specific Fuel Lines
Additional AN Hose Ends or Adapters
Spare Replacement Filter Element
Additional Vehicle-Specific Mounting Components
Upgrade your high-performance fuel system with the FUELAB PRO Series Extreme Flow Inline Fuel Filter (86833) for exceptional fuel flow capacity, advanced 6-micron filtration, and durable billet aluminum construction.
Featuring a massive 10 GPM advertised flow capacity, extended 6-inch micro-fiberglass filter element, -10AN male inlet and outlet connections, 200 PSI maximum operating pressure, and matte black anodized finish, the FUELAB 86833 is engineered for extreme-performance fuel systems.
Whether building a high-horsepower turbocharged Honda K-Series engine, upgrading an E85 fuel system, or assembling a dedicated motorsport vehicle, the FUELAB 86833 PRO Series Extreme Flow Fuel Filter provides the filtration capacity and serviceability needed for demanding fuel delivery applications.
| Part Number: | 86833 |
| Brand: | Fuelab |
| Color: | Black |
| Size: | -10AN |
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
Reviews
No Reviews Yet!
Write a Review