Product Details
The FUELAB 828 Series 100-Micron Inline Fuel Pre-Filter (82823-3) is a high-capacity fuel filtration solution designed to protect performance fuel pumps from contamination while maintaining excellent fuel flow and minimal pressure restriction.
Featuring a 5-inch stainless steel mesh filter element, -10AN male inlet and outlet connections, and a blue anodized billet aluminum housing, the FUELAB 82823-3 is engineered for demanding automotive fuel systems where reliable fuel delivery and efficient pre-pump filtration are essential.
Unlike fine-micron fuel filters intended to protect fuel injectors, the FUELAB 82823-3 is specifically designed for pre-pump filtration. Its 100-micron stainless steel element helps capture larger contaminants before they enter the fuel pump while minimizing inlet restriction that could contribute to pump cavitation.
Part of FUELAB's extended-length 828 Series, this filter features a larger filtration area than the compact 818 Series. The increased surface area helps improve contaminant-holding capacity, reduce pressure drop, and extend maintenance intervals under comparable operating conditions.
The filter housing is precision-machined from billet aluminum and finished in a durable blue anodized coating. Internal passages are designed to promote efficient fuel flow, while the integrated -10AN male connections allow convenient installation into compatible aftermarket fuel systems.
The stainless steel mesh element is cleanable and reusable, making the 82823-3 a practical long-term solution for street performance vehicles, turbocharged applications, and dedicated motorsport builds.
With a 200 PSI maximum operating pressure rating and compatibility with gasoline, racing gasoline, ethanol blends including E85, methanol, and diesel, the FUELAB 82823-3 offers versatile filtration for a wide range of custom fuel systems.
Whether upgrading a turbocharged Honda K-Series engine, assembling a high-flow E85 fuel system, or protecting an aftermarket fuel pump, the FUELAB 82823-3 delivers high-capacity filtration, low-restriction performance, and dependable construction.
Features
100-Micron Stainless Steel Filtration: Designed to capture larger fuel contaminants before they reach the fuel pump.
Pre-Pump Filtration Design: Optimized for installation on the inlet side of a compatible fuel pump.
5-Inch Filter Element: Extended-length stainless steel element provides increased filtration surface area.
828 Series High-Capacity Construction: Offers greater filtration capacity than the compact FUELAB 818 Series.
Blue Anodized Finish: Durable protective coating with a distinctive performance appearance.
Billet Aluminum Housing: Precision-machined construction designed for demanding fuel system applications.
-10AN Male Inlet: Compatible with appropriately sized female -10AN fuel line connections.
-10AN Male Outlet: Matching connection for compatible aftermarket fuel plumbing.
Low-Restriction Design: Helps minimize pressure drop on the fuel pump inlet side.
Helps Prevent Pump Cavitation: Designed to reduce inlet restriction compared with finer filtration media.
Cleanable Stainless Steel Element: Reusable filtration media allows convenient maintenance.
Replaceable Filter Element: Serviceable housing supports replacement when necessary.
200 PSI Maximum Operating Pressure: Suitable for properly configured fuel systems operating within manufacturer specifications.
Gasoline Compatible: Suitable for pump gasoline and compatible racing gasoline.
E85 Compatible: Supports ethanol-based fuels, including E85.
Methanol Compatible: Suitable for properly configured methanol fuel systems.
Diesel Compatible: Can be used in compatible diesel fuel systems.
Fluorosilicone Seals: Fuel-resistant sealing materials support multiple fuel types.
MIL-A-8625 Type II Anodizing: Manufacturer-specified protective finish.
Two Saddle Mounting Clamps: Included for secure installation.
Universal Performance Application: Designed for custom fuel systems using compatible -10AN plumbing.
Limited Lifetime Warranty: Backed by FUELAB's limited lifetime warranty, subject to manufacturer terms.
Vehicle Fitment
The FUELAB 82823-3 is a universal inline fuel pre-filter and is not a direct-fit replacement for a specific factory fuel filter.
It is intended for custom fuel systems using compatible -10AN fuel plumbing.
Honda and Acura Performance Applications
Honda Civic K20 and K24 Engine Swaps
Honda Civic Turbocharged B-Series Builds
Acura Integra B-Series and K-Series Performance Builds
Acura RSX Type-S Fuel System Upgrades
Honda S2000 Forced-Induction Applications
Honda Accord K-Series Performance Builds
Honda Prelude Custom Fuel System Applications
Additional Performance Applications
Subaru WRX and STI Performance Builds
Mitsubishi Lancer Evolution Fuel System Upgrades
Toyota Supra High-Performance Fuel Systems
Nissan Skyline and 240SX Performance Builds
Chevrolet LS and LT Engine Applications
Ford Mustang Forced-Induction Builds
Custom Drag Racing and Motorsport Vehicles
Important Fitment Note: These are potential custom applications, not confirmed direct-fit installations.
Compatibility depends on fuel pump configuration, fuel line dimensions, available mounting space, and overall fuel system requirements.
Popular Performance Applications
Honda K20 Turbo Fuel Systems
Honda K24 Turbo Fuel Systems
K-Series Engine Swaps
B-Series Turbocharged Honda Builds
E85 Performance Fuel Systems
External Fuel Pump Installations
High-Flow Fuel Pump Pre-Filtration
Custom Return-Style Fuel Systems
Turbocharged Street Cars
Supercharged Performance Vehicles
Drag Racing Fuel Systems
Road Racing and Time Attack Builds
Custom -10AN Fuel Plumbing
High-Capacity Fuel Pre-Filter Upgrades
Additional Information
- Manufacturer: FUELAB
- Manufacturer Part Number: 82823-3
- Product Series: 828 Series
- Product Type: Inline Fuel Pre-Filter
- Filter Configuration: Extended-Length / Long Body
- Filtration Rating: 100 Microns, Nominal / Relative
- Filter Element Material: Stainless Steel Mesh
- Filter Element Length: 5 Inches
- Filter Element Service: Cleanable, Reusable, and Replaceable
- Fuel Inlet Size: -10AN Male
- Fuel Outlet Size: -10AN Male
- Housing Material: Billet Aluminum
- Housing Finish: Blue Anodized
- Anodizing Specification: MIL-A-8625 Type II
- Maximum Operating Pressure: 200 PSI / 200 PSIG
- Overall Length: Approximately 6.39 Inches
- Outside Diameter: Approximately 2.13 Inches
- Fuel Compatibility: Gasoline, Racing Gasoline, Ethanol, E85, Methanol, and Diesel
- Sealing Material: Fluorosilicone
- Recommended Installation Position: Before the Fuel Pump
- Mounting Hardware: Two Low-Profile Saddle Clamps Included
- Serviceable Filter Housing: Yes
- Filter Element Cleaning: Permitted Following Manufacturer Instructions
- Warranty: FUELAB Limited Lifetime Warranty
- UPC: 845096005412
- Vehicle Application: Universal / Custom Performance Fuel Systems
- Quantity: One Inline Fuel Pre-Filter Assembly
100-Micron Stainless Steel Pre-Filtration
The FUELAB 82823-3 features a 100-micron stainless steel mesh filter element designed specifically for fuel pump inlet protection.
Fuel contamination can originate from fuel tanks, storage containers, deteriorating hoses, and debris introduced during fuel system installation.
Larger contaminants entering a fuel pump can contribute to accelerated wear, reduced performance, and premature component failure.
The 100-micron element helps capture these contaminants while maintaining a low-restriction path for incoming fuel.
Benefits include:
Protection against larger fuel contaminants
Reduced risk of contamination-related pump damage
Low-restriction fuel flow
Improved suitability for pre-pump installation
Cleanable and reusable filtration media
Increased filtration capacity
Important: The 100-micron element is intended for pre-pump filtration and should not be relied upon as the sole fine filtration stage protecting electronic fuel injectors.
A suitable downstream fuel filter should be selected according to the fuel injector and fuel system manufacturer's requirements.
Designed to Minimize Fuel Pump Cavitation
Fuel pumps require an adequate supply of fuel at their inlet to operate efficiently.
Excessive inlet restriction can contribute to cavitation, reduced fuel delivery, noise, and premature pump wear.
The FUELAB 82823-3 is designed to minimize unnecessary inlet restriction through its coarse stainless steel filtration media, large element surface area, and optimized internal passages.
Advantages include:
Reduced inlet-side pressure restriction
Improved fuel supply to compatible external pumps
Reduced likelihood of restriction-related cavitation
Support for high-flow fuel delivery systems
Improved pre-pump filtration capacity
Important: Proper fuel tank outlet sizing, pump mounting position, hose routing, and fuel supply plumbing remain essential to preventing cavitation.
Extended 5-Inch Filter Element Design
The FUELAB 828 Series uses a larger 5-inch filter element compared with the compact 818 Series, which features a 3-inch element.
The extended design increases available filtration surface area and contaminant-holding capacity.
Potential advantages include:
Greater filtration area
Increased contaminant-holding capacity
Reduced pressure drop under comparable conditions
Longer maintenance intervals
Improved suitability for demanding fuel systems
The extended housing is particularly useful for applications where increased filtration capacity is desired and adequate mounting space is available.
Cleanable and Reusable Stainless Steel Element
Unlike disposable micro-fiberglass or paper filtration media, the stainless steel mesh element in the FUELAB 82823-3 is designed to be cleaned and reused.
This allows routine fuel system maintenance without replacing the complete filter assembly.
Benefits include:
Reusable stainless steel filtration media
Reduced replacement element costs
Convenient inspection and maintenance
Long-term serviceability
Durable filtration construction
During maintenance, inspect the element for damage, distortion, or deterioration.
Replace the element if it is damaged or cannot be properly cleaned.
Maintenance Note: Follow FUELAB's recommended cleaning procedure and inspect the housing seals before reassembly.
Blue Anodized Billet Aluminum Construction
The FUELAB 82823-3 features a precision-machined billet aluminum housing with a blue anodized finish.
FUELAB specifies anodizing in accordance with MIL-A-8625 Type II.
Construction advantages include:
Durable billet aluminum housing
Corrosion-resistant anodized finish
Distinctive blue exterior
Precision-machined internal passages
Fluorosilicone sealing materials
Serviceable filter housing
Integrated -10AN male connections
The blue finish complements aftermarket fuel rails, regulators, pumps, and AN fuel plumbing.
Gasoline, E85, Methanol, and Diesel Compatibility
The FUELAB 82823-3 is designed for use with several common automotive and motorsport fuels.
Gasoline Applications
Suitable for properly configured fuel systems using pump gasoline or compatible racing gasoline.
E85 and Ethanol Applications
Compatible with ethanol-based fuels, including E85, making it useful for turbocharged and high-compression performance engines.
Methanol Applications
The stainless steel filtration element and compatible sealing materials support properly configured methanol fuel systems.
Diesel Applications
Can be incorporated into suitable diesel fuel systems when the operating pressure, flow, and filtration requirements are met.
Important: All components in the fuel system must be compatible with the selected fuel, including pumps, injectors, regulators, hoses, fittings, and seals.
High-Flow -10AN Fuel Connections
The FUELAB 82823-3 features -10AN male inlet and outlet connections.
These connections are commonly used in aftermarket performance fuel systems requiring increased fuel delivery capacity.
Advantages include:
Standardized AN plumbing compatibility
Integration with compatible -10AN fuel lines
Convenient installation with appropriate female AN hose ends
Reduced need for restrictive adapters
Suitable connection size for high-flow fuel systems
Important: Proper fuel line sizing should be determined by the complete fuel system's flow requirements.
Common Reasons for Replacement
Fuel Pump Protection: Prevent larger contaminants from entering a performance fuel pump.
High-Flow Fuel System Upgrade: Replace an undersized or restrictive pre-filter.
E85 Conversion: Install filtration compatible with ethanol-based fuels.
Turbocharger Installation: Support a properly configured high-output fuel system.
External Fuel Pump Installation: Add appropriate filtration ahead of the fuel pump.
Custom -10AN Fuel Plumbing: Incorporate a high-capacity pre-filter into aftermarket fuel lines.
K-Series Engine Swap: Upgrade fuel filtration for a modified K20 or K24 installation.
Motorsport Preparation: Improve fuel system serviceability and contamination protection.
Damaged Filter Housing: Replace a worn or damaged inline filter assembly.
Routine Fuel System Maintenance: Refresh aging filtration components during a fuel system rebuild.
Installation Notes
Verify Fuel System Compatibility: Confirm the -10AN inlet and outlet connections match the intended fuel plumbing.
Confirm Pre-Pump Placement: Install the filter before the fuel pump as recommended for this filtration element.
Check Fuel Pump Requirements: Verify the filter and plumbing provide adequate fuel supply to the pump.
Confirm Fuel Compatibility: Ensure the filter and all fuel system components are approved for the intended fuel.
Disconnect Battery Power: Isolate the electrical system before beginning installation.
Relieve Fuel Pressure: Safely depressurize the fuel system before disconnecting fuel lines.
Select a Suitable Mounting Location: Position the filter away from excessive heat, moving components, and potential impact hazards.
Install the Mounting Clamps: Secure the two supplied saddle clamps in an appropriate location.
Verify Fuel Flow Direction: Follow the manufacturer's inlet and outlet markings.
Connect the Inlet Fuel Line: Use a compatible -10AN female connection.
Connect the Outlet Fuel Line: Attach the fuel line leading to the pump using the appropriate -10AN fitting.
Follow AN Fitting Requirements: Do not apply thread sealant to AN flare sealing surfaces.
Secure the Filter Assembly: Ensure the filter is properly supported and protected from vibration.
Inspect Fuel Plumbing: Check for kinks, abrasion, sharp bends, and restrictions.
Prime the Fuel System: Follow the fuel pump manufacturer's recommended procedure.
Check for Leaks: Inspect all connections before operating the vehicle.
Verify Fuel Pressure: Confirm the fuel system maintains proper pressure during operation.
Monitor Under Load: Check fuel pressure during controlled performance testing.
Service the Filter Element: Clean and inspect the stainless steel mesh element according to FUELAB's maintenance instructions.
Installation Recommendation: Professional installation is recommended for custom fuel systems, E85 conversions, and high-horsepower performance applications.
What's Included
(1) FUELAB 828 Series Inline Fuel Pre-Filter Assembly – 82823-3
(1) Installed 5-Inch 100-Micron Stainless Steel Mesh Filter Element
(2) Low-Profile Saddle Mounting Clamps
Integrated -10AN Male Inlet and Outlet Connections
Manufacturer Installation Instructions
Not Included:
Fuel Pump
Fuel Pressure Regulator
Fine-Micron Post-Pump Fuel Filter
Vehicle-Specific Fuel Lines
Additional AN Hose Ends or Adapters
Spare Replacement Filter Element
Additional Vehicle-Specific Mounting Hardware
Protect your performance fuel pump with the FUELAB 828 Series 100-Micron Inline Fuel Pre-Filter (82823-3) for efficient pre-pump filtration, increased contaminant-holding capacity, and minimal fuel flow restriction.
Featuring a cleanable 5-inch stainless steel mesh element, -10AN male inlet and outlet connections, 200 PSI maximum operating pressure, and a durable blue anodized billet aluminum housing, the FUELAB 82823-3 is engineered for demanding fuel system applications.
Whether building a turbocharged Honda K-Series engine, upgrading an E85 fuel system, or installing a high-flow external fuel pump, the FUELAB 82823-3 provides a durable, reusable, and high-capacity filtration solution designed to help protect your investment and support consistent fuel delivery.
| Part Number: | 82823-3 |
| Brand: | Fuelab |
| Color: | Blue |
| Size: | -10AN |
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.
Vehicle Fitment
Reviews
No Reviews Yet!
Write a Review